Subaru Legacy III (2000-2003 year). Service manual — part 182
FU(H4SOw/oOBD)-34
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
11.Fuel Injector
A: REMOVAL
1. RH SIDE
1) Release fuel pressure.
<Ref. to FU(H4SOw/oOBD)-45, RELEASING OF
FUEL PRESSURE, OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
3) Disconnect battery ground cable.
4) Remove air intake duct and air cleaner assem-
bly. <Ref. to IN(H4SO)-7, REMOVAL, Air Intake
Duct.> and <Ref. to IN(H4SO)-6, REMOVAL, Air
Cleaner Case.>
5) Remove resonator chamber. <Ref. to
IN(H4SO)-8, REMOVAL, Resonator Chamber.>
6) Remove spark plug cords from spark plugs (#1
and #3 cylinders).
7) Remove power steering pump and tank from
brackets.
(1) Remove front V-belt covers.
<Ref. to ME(H4SO)-41, REMOVAL, V-belt.>
(2) Remove bolts which hold power steering
pipes onto intake manifold protector.
(3) Remove bolts which install power steering
pump to bracket.
(4) Disconnect connector from power steering
pump switch.
(5) Remove power steering tank from the
bracket by pulling it upwards.
FU-00009
FU-00302
FU-00718
FU-00139
FU-00428
FU-00429
FU(H4SOw/oOBD)-35
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
(6) Place power steering pump and tank on the
right side wheel apron.
8) Remove fuel pipe protector RH. (RHD model
only)
9) Disconnect connector from fuel injector.
10) Remove bolt which holds injector pipe to intake
manifold.
11) Remove bolt which install injector pipe to intake
manifold.
12) Remove fuel injector from intake manifold.
(1) Remove fuel injector securing clip.
(2) Remove fuel injector while lifting up fuel in-
jector pipe.
2. LH SIDE
1) Release fuel pressure. <Ref. to FU(H4SOw/
oOBD)-45, RELEASING OF FUEL PRESSURE,
OPERATION, Fuel.>
2) Open fuel flap lid, and remove fuel filler cap.
FU-00430
FU-00726
FU-00303
FU-00513
FU-00304
FU-00748
FU-00749
FU(H4SOw/oOBD)-36
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
3) Disconnect battery ground cable.
4) Remove two bolts which install washer tank on
body.
5) Disconnect connector from front window washer
motor.
6) Disconnect connector from rear gate glass
washer motor.
7) Disconnect rear window glass washer hose from
washer motor, then plug connection with a suitable
cap.
8) Move washer tank, and secure it away from
working area.
9) Remove spark plug cords from spark plugs (#2
and #4 cylinders).
10) Remove fuel pipe protector LH.
11) Disconnect connector from fuel injector.
FU-00009
FU-00190
FU-00191
FU-00192
FU-00750
FU-00266
FU-00751
FU(H4SOw/oOBD)-37
FUEL INJECTION (FUEL SYSTEMS)
FUEL INJECTOR
12) Remove bolt which holds injector pipe to intake
manifold.
13) Remove bolt which installs injector pipe to in-
take manifold.
14) Remove bolt which holds fuel pipe on the left
side intake manifold.
15) Remove fuel injector from intake manifold.
(1) Remove fuel injector securing clip.
(2) Remove fuel injector while lifting up fuel in-
jector pipe.
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE:
Replace O-rings with new ones.
Tightening torque:
5.0 N·m (0.51 kgf-m, 3.7 ft-lb)
FU-00309
FU-00731
FU-00311
FU-00312
(A) O-ring
(B) Fuel injector
(C) Intake manifold protector
FU-00313
FU-00738
( A )
( A )
( B )
( C )
FU-00304
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст