Opel Frontera UBS. Service manual — part 1035
DRIVE LINE CONTROL SYSTEM (TOD)
4B2–80
Chart B–2
The 4WD AUTO switch circuit is short to battery.
Function of circuit
—
Fail condition
Even after the transfer mode is selected from 2H to TOD, the indicator lamp status dose
not change.
Indicator lamp status
Transfer position
TOD
D04RY00114
4B2–81
DRIVE LINE CONTROL SYSTEM (TOD)
D04RY00115
DRIVE LINE CONTROL SYSTEM (TOD)
4B2–82
Step
Action
Yes
No
1
When the 4WD AUTO SW is selected to the 4WD position, is 0 V
observed between terminal 12 and 19?
Go to Step 2
Repair the 4WD
AUTO SW circuit.
Go to Step 7
2
When the 4WD AUTO SW is selected to the 2WD position, is 12 V
observed between terminals 12 and 19?
Go to Step 3
Repair the 4WD
AUTO SW circuit.
Go to Step 7
3
1. Disconnect the ECU connector.
Is the continuity established between terminals (B–67)1 and
(B–68)13?
Go to Step 4
Replace TOD
indicator lamp
bulb.
Go to Step 7
4
Is the continuity established between terminals (B–67)1 and
(B–68)14?
Go to Step 5
Replace TOD
indicator lamp
bulb.
Go to Step 7
5
Is the continuity established between terminals (B–67)1 and
(B–68)15?
Go to Step 6
Replace TOD
indicator lamp
bulb.
Go to Step 7
6
Is the continuity established between terminals (B–67)1 and
(B–68)16?
Replace ECU.
Go to Step 7
Replace TOD
indicator lamp
bulb.
Go to Step 7
7
Check that all the parts are mounted.
Is this step complete?
Repeat the
“Diagnosis Flow”.
Return to Step 7
4B2–83
DRIVE LINE CONTROL SYSTEM (TOD)
Chart C–1
4H switch circuit wires are broken or the battery is short-circuited.
Function of circuit
—
Fail condition
When the 4WD AUTO SW is 4WD mode.
When the lever is shifted from 4L to HIGH, the 4L mode remains on the indicator and the
TOD mode is displayed without turning off the previous mode.
Indicator lamp status
Transfer position
4L <——> Neutral <——> TOD
D04RY00114
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст