Infiniti G20 (P11). Manual — part 478
Schedule
2
NCMA0004S02
EMISSION
CONTROL
SYSTEM
MAINTENANCE
NCMA0004S0201
Abbreviations: R = Replace.
I = Inspect. Correct or replace if necessary.
[ ]: At the mileage intervals only
MAINTENANCE OPERATION
MAINTENANCE INTERVAL
Reference Section
- Page
or
- Content Title
Perform at number of miles, kilometers
or months, whichever comes first.
Miles x 1,000
(km x 1,000)
Months
7.5
(12)
6
15
(24)
12
22.5
(36)
18
30
(48)
24
37.5
(60)
30
45
(72)
36
52.5
(84)
42
60
(96)
48
Drive belts
NOTE (1)
I*
Air cleaner filter
[R]
[R]
EVAP vapor lines
I*
I*
Fuel lines
I*
I*
Fuel filter*
NOTE (2)
Engine coolant
NOTE (3)
R*
Engine oil
R
R
R
R
R
R
R
R
Engine oil filter (Use part No. 15208-
65F00 or equivalent.)
R
R
R
R
R
R
R
R
Spark plugs (PLATINUM-TIPPED type)
NOTE (4)
Replace every 105,000 miles (169,000 km)
NOTE:
(1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months.
(2) When the filter becomes clogged, the vehicle speed cannot be increased as the driver wishes. In such an event, replace the filter.
(3) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months.
(4) Original equipment platinum-tipped plug should be replaced at 105,000 miles (169,000 km). Conventional spark plugs can be used but should be replaced at 30,000 miles
(48,000 km) intervals.
★
Maintenance items and intervals with “*” are recommended by INFINITI for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the
emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.
GI
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
PERIODIC
MAINTENANCE
Schedule
2
MA-9
CHASSIS
AND
BODY
MAINTENANCE
NCMA0004S0202
Abbreviations: R = Replace.
I = Inspect. Correct or replace if necessary.
L = Lubricate.
MAINTENANCE OPERATION
MAINTENANCE INTERVAL
Reference Section
- Page
or
- Content Title
Perform at number of miles, kilometers
or months, whichever comes first.
Miles x 1,000
(km x 1,000)
Months
7.5
(12)
6
15
(24)
12
22.5
(36)
18
30
(48)
24
37.5
(60)
30
45
(72)
36
52.5
(84)
42
60
(96)
48
Brake lines & cables
I
I
I
I
Brake pads & rotors
I
I
I
I
Manual transaxle oil or automatic tran-
saxle fluid
I
I
I
I
Steering gear & linkage, axle & suspen-
sion parts
I
I
NOTE (3)
Tire rotation
NOTE (1)
Front drive shaft boots
I
I
I
I
AX-4, “Drive Shaft”
Exhaust system
I
I
Supplemental air bag system
NOTE (2)
RS-16, “Maintenance
items”
Ventilation air filter
R
R
R
R
HA-122, HA-208, “Ser-
vice Procedures”
Automatic Speed Control Device
(ASCD) vacuum hoses
I
I
I
I
ACTUATOR/PUMP
CHECK”
NOTE:
(1) Refer to “Tire rotation” under the “GENERAL MAINTENANCE” heading earlier in this section.
(2) Inspect the supplemental air bag system 10 years after the date of manufacture noted on the FMVSS certification label.
(3) Refer to SU-5, “Front Suspension Parts” and SU-19, “Rear Suspension Parts”, AX-3, “Front Axle Parts” and AX-20, “Rear Axle Parts”.
PERIODIC
MAINTENANCE
Schedule
2
(Cont’d)
MA-10
NCMA0005
Fluids and Lubricants
NCMA0005S01
Capacity (Approximate)
Recommended Fluids/Lubricants
US measure
Imp measure
Liter
Engine oil
Drain and refill
With oil filter
change
3-1/2 qt
2-7/8 qt
3.3
I
API Certification Mark*1
I
API grade SG/SH, Energy Conserving
I & II or API grade SJ, Energy Con-
serving*1
I
ILSAC grade GF-I & GF-II*1
Without oil fil-
ter change
3-1/4 qt
2-3/4 qt
3.1
Dry engine (engine overhaul)
4-1/4 qt
3-1/2 qt
4.0
Cooling system
(With reservoir)
MT
7-1/4 qt
6 qt
6.8
Genuine Nissan Anti-freeze coolant or
equivalent
AT
7-1/8 qt
5-7/8 qt
6.7
Manual transaxle
gear oil
RS5F70A/V
6-3/8 pt
5-1/4 pt
3.0
API GL-4, Viscosity SAE 75W-90 or
75W-85
Automatic transaxle
fluid
RE4F03B/W
7-3/8 qt
6-1/8 qt
7.0
Nissan Matic “D” (Continental U.S. and
Alaska) or Canada Nissan Automatic
Transmission Fluid*2
Power steering fluid
—
—
—
Genuine Nissan PSF II or equivalent*4
Brake and clutch fluid
—
—
—
Genuine Nissan Brake Fluid*3 or equiva-
lent
DOT 3 (US FMVSS No. 116)
Multi-purpose grease
—
—
—
NLGI No. 2 (Lithium soap base)
*1: For further details, see “SAE Viscosity Number”.
*2: Dexron
TM
III/Mercon
TM
, or equivalent may also be used. Outside the continental United States and Alaska contact an INFINITI deal-
ership for more information regarding suitable fluids, including recommended brand(s) of Dexron
TM
III/Mercon
TM
Automatic Transmis-
sion Fluid.
*3: Available in mainland U.S.A. through your INFINITI dealer.
*4: Genuine Nissan PSF, Canada Nissan Automatic Transmission Fluid, Dexron
TM
III/Mercon
TM
or equivalent ATF may also be used.
MMA117AA
SAE Viscosity Number
NCMA0005S02
GASOLINE ENGINE OIL
NCMA0005S0201
SAE 5W-30 viscosity oil is preferred for all temperatures. SAE
10W-30 and 10W-40 viscosity oil may be used if the ambient tem-
perature is above −18°C (0°F).
GI
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
RECOMMENDED FLUIDS AND LUBRICANTS
Fluids and Lubricants
MA-11
SMA947CA
Anti-freeze Coolant Mixture Ratio
NCMA0005S03
The engine cooling system is filled at the factory with a high-quality,
year-round, anti-freeze coolant solution. The anti-freeze solution
contains rust and corrosion inhibitors. Therefore, additional cooling
system additives are not necessary.
CAUTION:
When adding or replacing coolant, be sure to use only Genu-
ine Nissan anti-freeze coolant or equivalent with the proper
mixture ratio of 50% anti-freeze and 50% demineralized water/
distilled water.
Other types of coolant solutions may damage your cooling
system.
RECOMMENDED FLUIDS AND LUBRICANTS
Anti-freeze Coolant Mixture Ratio
MA-12
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст