Infiniti G20 (P11). Manual — part 133
Removal and Installation
NCBT0009
CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
1. Remove front and rear seats. Refer to “FRONT SEAT” and “REAR SEAT” for details, BT-40 and BT-43.
2. Remove front and rear seat belts. Refer to “SEAT BELTS” in RS section for details.
3. Remove front and rear outer kicking plates.
4. Remove front and rear inner kicking plates.
5. Remove front and rear body side welts.
6. Remove dash side lower finishers.
7. Remove front pillar garnishes.
8. Remove center pillar lower garnishes.
9. Remove center pillar upper garnishes.
10. Remove rear pillar garnishes.
11. Remove child anchor cover and child anchor bolt.
(For high-mounted stop lamp, refer to detail
.)
12. Remove rear parcel shelf.
13. Remove seatback welt.
14. Remove seatback center finisher.
15. Remove seatback side finishers.
SBT852
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation
BT-27
SBT853
SIDE AND FLOOR TRIM
Removal and Installation (Cont’d)
BT-28
Removal and Installation
NCBT0010
Front Door Trim
1. Remove power window switch, then disconnect the connector.
2. Remove inside handle escutcheon.
3. Remove bolts securing door finisher.
4. Pull on door finisher to remove clips from door panel and remove door finisher.
Rear Door Trim
5. Remove inside handle escutcheon.
6. Remove bolts securing door finisher.
7. Pull on door finisher to remove clips from door panel and remove door finisher, then disconnect power
window switch connector.
SBT392
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
DOOR TRIM
Removal and Installation
BT-29
SBT393
DOOR TRIM
Removal and Installation (Cont’d)
BT-30
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст