Infiniti G20 (P11). Manual — part 76
SAT272E
38. Remove forward clutch assembly from transmission case.
AAT215A
39. Remove thrust washer from transmission case.
SAT059D
40. Remove output shaft assembly according to the following pro-
cedures.
a.
Remove side cover bolts.
SAT434D
b.
Remove side cover by lightly tapping it with a soft hammer.
I
Be careful not to drop output shaft assembly. It might
come out when removing side cover.
SAT440D
c.
Remove adjusting shim.
GI
MA
EM
LC
EC
FE
CL
MT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DISASSEMBLY
AT-301
SAT439D
d.
Remove output shaft assembly.
SAT435D
I
If output shaft assembly came off with side cover, tap cover
with a soft hammer to separate.
SAT453D
e.
Remove needle bearing.
SAT060D
41. Disassemble reduction pinion gear according to the following
procedures.
a.
Set manual shaft to position “P” to fix idler gear.
b.
Unlock idler gear lock nut using a pin punch.
SAT061D
c.
Remove idler gear lock nut.
I
Do not reuse idler gear lock nut.
DISASSEMBLY
AT-302
AAT480
d.
Remove idler gear with puller.
SAT310G
e.
Remove reduction pinion gear.
f.
Remove adjusting shim from reduction pinion gear.
SAT064D
42. Remove return spring from parking shaft using a screwdriver.
SAT065D
43. Draw out parking shaft and remove parking pole from trans-
mission case.
44. Check parking pole and shaft for damage or wear.
SAT066D
45. Remove parking actuator support from transmission case.
I
Check parking actuator support for damage or wear.
GI
MA
EM
LC
EC
FE
CL
MT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DISASSEMBLY
AT-303
SAT311G
46. Remove revolution sensor from transmission case.
DISASSEMBLY
AT-304
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст