Infiniti QX56 (JA60). Manual — part 101
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< FUNCTION DIAGNOSIS >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
WIPER
WIPER : CONSULT-III Function (BCM - WIPER)
INFOID:0000000005146402
WORK SUPPORT
*: Factory setting
DATA MONITOR
Test Item
Operation
Description
TAIL LAMP
ON
Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
OFF
Stops the tail lamp request signal transmission.
HEAD LAMP
HI
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI).
LO
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
OFF
Stops the high & low beam request signal transmission.
FR FOG LAMP
ON
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
OFF
Stops the front fog lights request signal transmission.
CARGO LAMP
ON
Transmits the cargo lamp request signal with CAN communication to
turn the lamp ON.
OFF
Stops the cargo lamp request signal transmission.
CORNERING LAMP
LH
Transmits the LH cornering lamp request signal with CAN communica-
tion to turn the lamp ON.
RH
Transmits the RH cornering lamp request signal with CAN communica-
tion to turn the lamp ON.
OFF
Stops the day time running light request signal transmission.
Work Item
Setting
Item
Description
WIPER SPEED
SETTING
ON*
With vehicle speed
(Front wiper intermittent time linked with the vehicle speed and wiper intermittent dial position)
OFF
Without vehicle speed
(Front wiper intermittent time linked with the wiper intermittent dial position)
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch ON status judged from ignition power supply
IGN SW CAN [ON/OFF]
Ignition switch ON status received from IPDM E/R via CAN communication
FR WIPER HI [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
FR WIPER LOW [ON/OFF]
FR WIPER INT [ON/OFF]
FR WASHER SW [ON/OFF]
INT VOLUME [1 - 7]
Each switch status that BCM judges from the combination switch reading function
FR WIPER STOP [ON/OFF]
Front wiper motor (stop position) status received from IPDM E/R with CAN communica-
tion
VEHICLE SPEED [km/h]
The value of the vehicle speed signal received from combination meter with CAN com-
munication
BCS-24
< FUNCTION DIAGNOSIS >
[BCM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)
INFOID:0000000005146403
DATA MONITOR
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT-III Function (BCM - AIR CONDITIONER)
INFOID:0000000005146404
DATA MONITOR
RR WIPER ON [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
RR WIPER INT [ON/OFF]
RR WASHER SW [ON/OFF]
RR WIPER STOP [ON/OFF]
Rear wiper motor (stop position) status input from the rear wiper motor
Monitor Item
[Unit]
Description
Test Item
Operation
Description
FR WIPER
HI
Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to op-
erate the front wiper HI operation.
LO
Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to
operate the front wiper LO operation.
INT
Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to
operate the front wiper INT operation.
OFF
Stops transmitting the front wiper request signal to stop the front wiper operation.
RISE UP WIPER
TEST
ON
Outputs the voltage to operate the rear wiper motor.
OFF
Stops the voltage to stop.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
HAZARD SW [ON/OFF]
The switch status input from the hazard switch
TURN SIGNAL R [ON/OFF]
Each switch condition that BCM judges from the combination switch reading function
TURN SIGNAL L [ON/OFF]
BRAKE SW [ON/OFF]
The switch status input from the brake switch
Test Item
Operation
Description
FLASHER
RH
Outputs the voltage to turn the right side turn signal lamps ON.
LH
Outputs the voltage to turn the left side turn signal lamps ON.
OFF
Stops the voltage to turn the turn signal lamps OFF.
Monitor Item
[Unit]
Contents
IGN ON SW [ON/OFF]
Display [ignition switch position (On)/(Off), ACC position (Off)] status as judged from ignition
switch signal
FAN ON SIG [ON/OFF]
Display [FAN (On)/FAN (Off)] status as judged form blower fan motor switch signal
AIR COND SW [ON/OFF]
Display [COMP (On)/COMP (Off)] status as judged form air conditioner switch signal
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-25
< FUNCTION DIAGNOSIS >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
INTELLIGENT KEY
INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)
INFOID:0000000005146405
DATA MONITOR
COMB SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
INFOID:0000000005146406
DATA MONITOR
Monitor Item
[Unit]
Condition
I-KEY LOCK [ON/OFF]
Indicates condition of lock signal from Intelligent Key
I-KEY UNLOCK [ON/OFF]
Indicates [condition of unlock signal from Intelligent Key
I-KEY TRUNK [ON/OFF]
Indicates condition of trunk open signal from Intelligent Key
I-KEY PW DWN [ON/OFF]
Indicates condition of all power window signal from Intelligent Key
I-KEY PANIC [ON/OFF]
Indicates condition of panic signal from Intelligent Key
PUSH SW [ON/OFF]
Indicates condition of ignition knob switch
Monitor Item
[Unit]
Description
TURN SIGNAL R
[OFF/ON]
Displays the status of the TURN RH switch in combination switch judged by BCM with the combination switch
reading function
TURN SIGNAL L
[OFF/ON]
Displays the status of the TURN LH switch in combination switch judged by BCM with the combination switch
reading function
HI BEAM SW
[OFF/ON]
Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch
reading function
HEAD LAMP SW1
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
HEAD LAMP SW2
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
LIGHT SW 1ST
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
PASSING SW
[OFF/ON]
Displays the status of the PASSING switch in combination switch judged by BCM with the combination switch
reading function
AUTO LIGHT SW
[OFF/ON]
Displays the status of the AUTO LIGHT switch in combination switch judged by BCM with the combination
switch reading function
FR FOG SW
[OFF/ON]
Displays the status of the FR FOG switch in combination switch judged by BCM with the combination switch
reading function
FR WIPER HI
[OFF/ON]
Displays the status of the FR WIPER HI switch in combination switch judged by BCM with the combination
switch reading function
FR WIPER LOW
[OFF/ON]
Displays the status of the FR WIPER LOW switch in combination switch judged by BCM with the combination
switch reading function
FR WIPER INT
[OFF/ON]
Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination
switch reading function
FR WASHER SW
[OFF/ON]
Displays the status of the FR WASHER switch in combination switch judged by BCM with the combination
switch reading function
INT VOLUME
[1 - 7]
Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading
function
RR WIPER ON
[OFF/ON]
Displays the status of the RR WIPER switch in combination switch judged by BCM with the combination
switch reading function
BCS-26
< FUNCTION DIAGNOSIS >
[BCM]
DIAGNOSIS SYSTEM (BCM)
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000005146407
DATA MONITOR
ACTIVE TEST
BATTERY SAVER
BATTERY SAVER : CONSULT-III Function (BCM - BATTERY SAVER)
INFOID:0000000005146408
WORK SUPPORT
*: Initial setting
DATA MONITOR
ACTIVE TEST
RR WIPER INT
[OFF/ON]
Displays the status of the RR WIPER INT switch in combination switch judged by BCM with the combination
switch reading function
RR WASHER SW
[OFF/ON]
Displays the status of the RR WASHER switch in combination switch judged by BCM with the combination
switch reading function
Monitor Item
[Unit]
Description
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
Work Item
Setting Item
Setting
ROOM LAMP TIMER SET
MODE 1*
30 min.
Sets the interior room lamp battery saver timer operating
time.
MODE 2
60 min.
MODE 3
10 min.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
KEY ON SW [ON/OFF]
The switch status input from key switch
DOOR SW-DR [ON/OFF]
The switch status input from front door switch (driver side)
DOOR SW-AS [ON/OFF]
The switch status input from front door switch (passenger side)
DOOR SW-RR [ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL [ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW [ON/OFF]
The switch status input from back door switch
KEY CYL LK-SW [ON/OFF]
Lock switch status input from door key cylinder switch
KEY CYL UN-SW [ON/OFF]
Unlock switch status input from door key cylinder switch
CDL LOCK SW [ON/OFF]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Unlock switch status input from door lock and unlock switch
I-KEY LOCK [ON/OFF]
Lock signal status received from Intelligent Key unit by CAN communication
I-KEY UNLOCK [ON/OFF]
Unlock signal status received from Intelligent Key unit by CAN communication
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст