Infiniti QX56 (JA60). Manual — part 889
![](/vehicles/zatt/vend/genn/ydragnit.png)
SRS AIR BAG SYSTEM
SRC-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
SRS Component Parts Location
INFOID:0000000005147772
Driver Air Bag Module
INFOID:0000000005147773
The driver air bag module is dual stage and located in the steering
wheel assembly. It operates with the SRS system in a frontal colli-
sion exceeding a specified level.
1.
Side curtain air bag modules
2.
Front RH side air bag module
3.
Belt tension sensor
4.
RH side air bag (satellite) sensor
5.
Front RH seat belt pre-tension-
er
6.
Seat belt buckle pre-tensioner assembly
RH
7.
Occupant classification system sen-
sor
8.
Occupant classification system
control unit
9.
Front passenger air bag off indicator
10. Front passenger air bag module
11. Crash zone sensor
12. Air bag warning lamp
13. Spiral cable
14. Driver air bag module
15. LH side air bag (satellite) sensor
16. Front LH seat belt pre-tensioner
17. Air bag diagnosis sensor unit
18. Front LH side air bag module
WHIA0216E
WHIA0325E
![](/vehicles/zatt/vend/genn/ede.png)
SRC-8
< FUNCTION DIAGNOSIS >
SRS AIR BAG SYSTEM
Front Passenger Air Bag Module
INFOID:0000000005147774
The front passenger air bag module is located behind the instrument
panel assembly. It operates with the SRS system in a frontal colli-
sion exceeding a specified level. Refer to
for more information.
Front Side Air Bag
INFOID:0000000005147775
Front side air bag modules are built into the front seatback assem-
blies. Vehicles with side air bags are equipped with labels as shown.
Side Curtain Air Bag
INFOID:0000000005147776
Side curtain air bag modules are located above the vehicle headlining.
Vehicles with side curtain air bags are equipped with labels as
shown.
Front Seat Belt Pre-tensioner with Load Limiter
INFOID:0000000005147777
The seat belt pre-tensioner system with load limiter is installed for
both the driver's seat and the front passenger's seat. It operates
simultaneously with the SRS air bag system in the event of a frontal
collision with an impact exceeding a specified level.
When the frontal collision with an impact exceeding a specified level
occurs, seat belt slack resulting from clothing or other factors is
immediately taken up by the pre-tensioner. Vehicle passengers are
securely restrained.
When passengers in a vehicle are thrown forward in a collision and
the restraining force of the seat belt exceeds a specified level, the
load limiter permits the specified extension of the seat belt by the
twisting of the ELR shaft, and a relaxation of the chest-area seat belt
web tension while maintaining force.
WHIA0332E
WHIA0327E
WHIA0041E
WHIA0324E
![](/vehicles/zatt/vend/genn/xyo.png)
SRS AIR BAG SYSTEM
SRC-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Direct-connect SRS Component Connectors
INFOID:0000000005147778
The following SRS components use direct-connect style harness connectors.
• Driver air bag module
• Front passenger air bag module
• LH side front curtain air bag module
• LH side rear curtain air bag module
• RH side front curtain air bag module
• RH side rear curtain air bag module
• Front LH seat belt pre-tensioner
• Front RH seat belt pre-tensioner
• Seat belt buckle pre-tensioner assembly LH
• Seat belt buckle pre-tensioner assembly RH
Always pull up to release locking tab prior to removing connector from SRS component.
Always push down to lock black locking tab after installing connector
to SRS component. When locked, the black locking tab is level with
the connector housing.
WHIA0103E
![](/vehicles/zatt/vend/genn/deyo.png)
SRC-10
< FUNCTION DIAGNOSIS >
OCCUPANT CLASSIFICATION SYSTEM
OCCUPANT CLASSIFICATION SYSTEM
System Diagram
INFOID:0000000005147779
Occupant Classification System (OCS)
INFOID:0000000005147780
The occupant classification system (OCS) identifies different size occupants, out of position occupants, and
detects if child seat is present in the front passenger seat. The OCS receives inputs from the occupant classi-
fication sensor (located inside the passenger seat cushion assembly) and belt tension sensor (part of the pas-
senger front seat belt assembly and located at the belt anchor location). Depending on classification of the
passenger, the OCS sends a signal to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit
uses this signal and the seat belt buckle switch RH signal to determine deployment or non deployment of the
passenger front air bag in the event of a collision. Depending on the signals received, the air bag diagnosis
sensor unit can disable the passenger front air bag completely.
NOTE:
In case of customer concern, CONSULT-III can be used to confirm the passenger air bag status (readiness).
Passenger Air Bag Status Conditions
NOTE:
ALHIA0042GB
Front Passenger Seat
(Condition)
PASS AIR BAG OFF Indicator
(Status)
Passenger Air Bag Status
(Readiness)
CONSULT-III Display
Seat occupied
OFF
Active (enabled)
ON
Seat occupied
NOTE
ON
Deactivated (disabled)
OFF
Seat empty
OFF
Deactivated (disabled)
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст