Infiniti QX56 (JA60). Manual — part 649
![](/vehicles/zatt/vend/genn/bol.png)
IP-20
< ON-VEHICLE REPAIR >
FRONT CENTER CONSOLE
FRONT CENTER CONSOLE
Exploded View
INFOID:0000000005147372
Removal and Installation
INFOID:0000000005147373
REMOVAL
1. Move front seats forward.
2. Remove A/T finisher and front center console upper screws.
IP-19, "Removal and Installation"
.
3. Remove A/T shift selector. Refer to
.
4. Remove instrument lower panel RH and glove box assembly.
IP-17, "Removal and Installation"
.
5. Remove center console lower cover RH/LH, then remove front
center console lower screws.
6. Open the console lid assembly and remove console bin mat,
then remove the rear inside screws.
7. Remove lower front center console screws at the rear.
8. Release front center console from floor and tilt to disconnect electrical connectors.
9. Carefully remove front center console assembly through rear door opening.
CAUTION:
Always use an assistant to steady the front center console assembly during removal from vehicle
interior.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0081GB
AWJIA0014ZZ
![](/vehicles/zatt/vend/genn/zesadrorurei.png)
REAR CENTER CONSOLE
IP-21
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
REAR CENTER CONSOLE
Removal and Installation
INFOID:0000000005147374
REMOVAL
1. Remove cup holder insert.
2. Release latch and remove rear center console assembly.
INSTALLATION
Installation is in the reverse order of removal.
ALJIA0082ZZ
![](/vehicles/zatt/vend/genn/heatoobr.png)
IP-22
< DISASSEMBLY AND ASSEMBLY >
FRONT CENTER CONSOLE
DISASSEMBLY AND ASSEMBLY
FRONT CENTER CONSOLE
Exploded View
INFOID:0000000005147375
ALJIA0103ZZ
FRONT CENTER CONSOLE
IP-23
< DISASSEMBLY AND ASSEMBLY >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Disassembly and Assembly
INFOID:0000000005147376
DISASSEMBLY
1. Remove latch from console lid.
2. Remove console lid and lid hinge.
3. Remove console bin.
4. Disconnect electrical harness connector from DVD player (if equipped).
5. Remove rear upper finisher.
6. Remove rear cup holder assembly.
7. Remove rear finisher assembly, tilt aside and disconnect electrical connectors.
8. Remove console power socket, then disconnect electrical connector.
9. Remove screws on each side, release clips and remove console covers RH/LH.
10. Remove storage compartment and mask.
11. Remove console front bracket.
12. Remove heat duct and rear console duct.
13. Remove console rear bracket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
1.
Console lid assembly
2.
A/T finisher
3.
Console upper finisher
4.
Storage compartment
5.
Storage compartment mask
6.
Console reinforcement assembly
7.
Console front bracket
8.
Lower side finisher LH
9.
Center console lower cover LH
10. Console cover LH
11. Rear console duct
12. Console power socket
13. Rear cup holder assembly
14. Rear finisher assembly
15. Console rear bracket
16. Heat duct
17. Rear upper finisher
18. Console bin mat
19. Console bin
20. Console cover RH
21. Center console lower cover RH
22. Lower side finisher RH
23. A/T transmission control
24. Mask
25. Cup holder insert
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст