Infiniti QX56 (JA60). Manual — part 998
![](/vehicles/zatt/vend/genn/bamyea.png)
INTAKE DOOR MOTOR
VTL-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INTAKE DOOR MOTOR
Removal and Installation
INFOID:0000000005147617
Intake Door Motor - Front Heater and Cooling Unit Assembly
REMOVAL
1. Remove the front heater and cooling unit assembly. Refer to
VTL-17, "Removal and Installation"
.
2. Remove the steering member from the front heater and cooling unit assembly.
3. Disconnect the intake door motor electrical connector.
4. Remove the three screws and remove the intake door motor.
INSTALLATION
Installation is in the reverse order of removal.
LJIA0139E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (driver)
4.
Variable blower control
5.
Air mix door motor (passenger)
6.
Mode door motor
7.
Defroster door motor
![](/vehicles/zatt/vend/genn/nokeca.png)
VTL-28
< ON-VEHICLE REPAIR >
MODE DOOR MOTOR
MODE DOOR MOTOR
Components
INFOID:0000000005147618
Front Mode Door Motor - Front Heater and Cooling Unit Assembly
LJIA0139E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (driver)
4.
Variable blower control
5.
Air mix door motor (passenger)
6.
Mode door motor
7.
Defroster door motor
![](/vehicles/zatt/vend/genn/ciotendi.png)
MODE DOOR MOTOR
VTL-29
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
Rear Mode Door Motor - Rear Heater and Cooling Unit Assembly
Removal and Installation
INFOID:0000000005147619
FRONT MODE DOOR MOTOR
Removal
1. Remove the instrument lower panel LH. Refer to
2. Remove the accelerator pedal. Refer to
ACC-4, "Removal and Installation"
.
3. Remove the BCM. Refer to
BCS-59, "Removal and Installation"
.
4. Remove the BOSE amp. (if equipped). Refer to
AV-182, "Removal and Installation"
.
5. Remove the center console lower cover LH. Refer to
IP-20, "Removal and Installation"
.
6. Disconnect the front mode door motor connector.
7. Remove the two screws and remove the front mode door motor.
Installation
Installation is in the reverse order of removal.
REAR MODE DOOR MOTOR
Removal
1. Remove the luggage side finisher lower and upper RH. Refer to
INT-19, "Removal and Installation"
2. Remove the rear heater and cooling unit assembly. Refer to
VTL-17, "Removal and Installation"
3. Disconnect the rear mode door motor connector.
4. Remove the two screws and remove rear mode door motor.
Installation
Installation is in the reverse order of removal.
ALIIA0065ZZ
1.
Variable blower control
2.
Mode door motor
3.
Rear heater and cooling unit assembly
Front
![](/vehicles/zatt/vend/genn/finohia.png)
VTL-30
< ON-VEHICLE REPAIR >
AIR MIX DOOR MOTOR
AIR MIX DOOR MOTOR
Component
INFOID:0000000005147620
Front Air Mix Door Motors - Front Heater and Cooling Unit Assembly
LJIA0139E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (driver)
4.
Variable blower control
5.
Air mix door motor (passenger)
6.
Mode door motor
7.
Defroster door motor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст