Infiniti QX56 (JA60). Manual — part 262
KEY REMINDER FUNCTION SYMPTOMS
DLK-219
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY REMINDER FUNCTION SYMPTOMS
Symptom Table
INFOID:0000000005147039
KEY REMINDER FUNCTION MALFUNCTION
NOTE:
• Before performing the diagnosis in the following table, check “Work flow”. Refer to
.
• If the following symptoms” are detected, check systems shown in the “Diagnosis/service procedure” column
in this order.
Conditions of Vehicle (Operating Conditions)
• “LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-III.
• “ANSWER BACK FUNCTION” is ON when setting on CONSULT-III.
• Ignition switch is in OFF position.
• All doors are closed.
• Ignition switch is not depressed.
Symptom
Diagnosis/service procedure
Reference page
Key reminder function does not operate.
1.
Check “ANTI KEY LOCK IN FUNCTI”setting in “WORK SUP-
PORT”.
2.
Check door switch.
3.
Check inside key antennas
Center console area (rear)
Luggage area
Center console area (front)
Overhead console area
4.
Check unlock sensor.
5.
Check Intelligent Key battery inspection.
6.
Check Intermittent Incident.
DLK-220
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
HAZARD FUNCTION
HAZARD FUNCTION
Symptom Table
INFOID:0000000005147040
HAZARD AND BUZZER REMINDER FUNCTION MALFUNCTION
NOTE:
• Before performing the diagnosis in the following table, check “Work flow”. Refer to
.
• If the following symptoms” are detected, check systems shown in the “Diagnosis/service procedure” column
in this order.
Conditions of Vehicle (Operating Conditions)
• “LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-III.
• “ANSWER BACK FUNCTION” is ON when setting on CONSULT-III.
• Ignition switch is in OFF position.
• All doors are closed.
• Ignition switch is not depressed.
Symptom
Diagnosis/service procedure
Reference
page
Hazard reminder does not operate by request switch.
(Buzzer reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2. Check hazard function.
3. Check Intermittent incident.
Hazard reminder does not operate by Intelligent Key.
(Buzzer reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2. Check hazard function.
3. Check Intelligent Key battery inspection.
Buzzer reminder does not operate by request switch.
(Hazard reminder operate.)
1.
Check “ANS BACK I-KEY LOCK” or “ANS BACK I-KEY
UNLOCK” setting in “WORK SUPPORT”.
2. Check Intelligent Key warning buzzer.
3. Check Intermittent incident.
HORN FUNCTION
DLK-221
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HORN FUNCTION
Symptom Table
INFOID:0000000005147041
HAZARD AND HORN REMINDER FUNCTION MALFUNCTION
NOTE:
• Before performing the diagnosis in the following table, check “Work flow”. Refer to
.
• If the following symptoms” are detected, check systems shown in the “Diagnosis/service procedure” column
in this order.
Conditions of Vehicle (Operating Conditions)
• “ANSWER BACK FUNCTION” is ON when setting on CONSULT-III.
• Ignition switch is in OFF position.
• All doors are closed.
Symptom
Diagnosis/service procedure
Reference
page
Hazard reminder does not operate by request switch.
(Horn reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2. Check hazard function.
3. Check Intermittent Incident.
Hazard reminder does not operate by Intelligent Key.
(Horn reminder operate.)
1.
Check “HAZARD ANSWER BACK” setting in “WORK
SUPPORT”.
2. Check hazard function.
3. Check Intelligent Key battery inspection.
Horn reminder does not operate by request switch.
(Hazard reminder operate.)
1.
Check “ANSWER BACK WITH I-KEY LOCK” or “AN-
SWER BACK WITH I-KEY UNLOCK” setting in “WORK
SUPPORT”.
2. Check Intelligent Key warning buzzer.
3. Check Intermittent Incident.
Horn reminder does not operate by Intelligent Key.
(Hazard reminder operate.)
1.
Check “HORN WITH KEYLESS LOCK” setting in
“WORK SUPPORT”.
2. Check horn function.
3. Check Intermittent Incident.
DLK-222
< SYMPTOM DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
HOMELINK UNIVERSAL TRANSCEIVER
HOMELINK UNIVERSAL TRANSCEIVER
Symptom Table
INFOID:0000000005147042
HOMELINK UNIVERSAL TRANSCEIVER MALFUNCTION
Symptom
Diagnosis/service procedure
Reference page
Homelink universal transceiver does not operate properly.
1.
Check homelink universal transceiver function.
2.
Check Intermittent Incident.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст