Infiniti QX80/QX (2017 year). Manual — part 19

(298,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-92

Monitor, climate, audio, phone and voice recognition systems

How to use headphones:
Control buttons for the headphones are
located on the back of the right headphone
speaker.
.

Turning power on/off:

Push the power ON/OFF button to turn
the headphones on or off. The POWER
indicator will illuminate when the head-
phones are on.

.

Selecting display (L/R):

When the rear displays are playing
different sources, sliding the DISPLAY
SELECT switch selects which of the
audio sources to listen to.
— L: the headphone will play audio

from the source playing on the left
display.

— R: the headphone will play audio

from the source playing on the right
display.

JVH0360X

The selected headphone channel
(“Left” or “Right”)

*

1

will appear on

the menu screen on the rear display.

.

Adjusting volume:

Turn the VOL control dial to adjust the
volume.

.

Changing surround audio modes:

Three types of virtual surround modes
supported by natune surround sound
technology are available. Push the
MODE button to select a surround
audio mode optimal for the media.
The indicator of the selected mode will
illuminate.

— CINEMA:

Optimum mode for movies. Provides

powerful surround audio as if you

are in a theater.

— MUSIC:

Provides natural and clear sounds

with stability optimal for listening to

music.

— GAME:

Provides realistic effort for playing

games with bass enhanced sounds.

When all of virtual surround modes are
turned off, audio adjustment functions
are turned off and a regular 2.0 ch
stereo mode is applied.

Operating tips:
.

The headphones will automatically turn

off in about 4 minutes if there is no
audio output during that period. The
headphones will also turn off after
approximately 4 hours of continuous
use. To prevent the battery from being
discharged, keep the power turned off
when not in use.

.

If the sound from the headphones is not

clear, it may be due to interference from
an infrared communication device or a
cellular phone. If this happens, turn
down the headphone volume or stop

Condition:

(299,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

using the headphones. It is also possi-
ble that the headphones may be too far
from the transmitter which is in the rear
display screen.

.

The sound may also be interrupted

temporarily when there is an obstacle
between the headphones and the
transmitter. Remove the obstacle, such
as opaque materials, hands, hair, etc.

JVH1489X

1.

POWER button

2.

SOURCE button

3.

Select button (

,

,

or

)

4.

BACK button

5.

Keypad

6.

Volume control button (

or

)

7.

Rear display select switch

8.

MENU button

9.

ENTER button

10. SETUP button
11.

Key illumination button

See “Remote controller operation” (P.4-

Monitor, climate, audio, phone and voice recognition systems

4-93

Condition:

(300,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-94

Monitor, climate, audio, phone and voice recognition systems

100) for the function of each button.

JVH0407X

Remote controller

Activating rear display:
Select the left or right rear display using
the rear display select switch on the
remote controller and push the

Power

button to activate the corresponding rear
display.

JVH0362X

When the rear display is on, the icon

*

1

will be displayed.

Condition:

(301,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

JVH0246X

JVH1042X

Remote controller and headphones

battery replacement

CAUTION

.

An improperly disposed battery can
harm the environment. Always confirm
local regulations for battery disposal.

.

When changing batteries, do not let dust
or oil get on the components.

NOTE:
.

Change the batteries of the remote

controller when it does not function
properly.

.

Change the batteries of the head-

phones when it stops functioning while
playing or when it produces noise.

To replace the battery:
1. Open the lid as illustrated.

.

For headphones, use a flat object
such, as a coin, if necessary to open
the lid located on the back of the left
headphone speaker.

2. Replace both batteries with new ones.

.

Recommended battery:
Size AA 6 2 (remote controller)

Monitor, climate, audio, phone and voice recognition systems

4-95

Condition:

(302,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-96

Monitor, climate, audio, phone and voice recognition systems

Size AAA 6 2 (headphones)

.

Be careful not to touch the battery
terminal.

.

Make sure that the + and 7 ends
on the batteries match the markings
inside the compartment.

3. Close the lid securely.

.

If you will not be using the remote
controller for long periods of time,
remove the batteries.

.

Replacement of the batteries is
needed when the remote controller
only functions at extremely close
distances to the Dual Head Restraint
DVD System or when it does not
function at all.

FCC Notice:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate the equipment. This device
complies with Part 15 of the FCC Rules
and RSS-210 of Industry Canada. Opera-
tion is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation of the device.

BEFORE OPERATING DUAL HEAD

RESTRAINT DVD SYSTEM
Precautions

Start the engine when using the Dual Head
Restraint DVD System.

WARNING

The driver must not attempt to operate the
Dual Head Restraint DVD System or wear the
headphones while the vehicle is in motion
so that full attention may be given to vehicle
operation.

CAUTION

.

Only operate the Dual Head Restraint
DVD System while the vehicle engine is
running. Operating the Dual Head Re-
straint DVD System for extended periods
of time with the engine OFF can dis-
charge the vehicle battery.

.

Do not allow the system to get wet.
Excessive moisture such as spilled
liquids may cause the system to mal-
function.

.

While playing VIDEO-CD media, this DVD
player does not guarantee complete
functionality of all VIDEO-CD formats.

Parental level (parental control)

Video data with the parental control setting
can be played with this system. Please use
your own judgement to set the parental
control with the system.

Disc selection

You can play the following disc formats
with the DVD player:

.

DVD-VIDEO

.

VIDEO-CD

.

DTS-CD

Use DVDs with the region code “ALL” or the
code applicable to your country. (The
region code is displayed as a small symbol
printed on the top of the DVD.) This vehicle-
installed DVD player can only play DVDs
with an applicable region code.

Condition:

(303,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

Available sources

The following sources are available to play
on each display:
Front display:
.

Radio

.

CD/DVD

.

USB memory/iPod

®

.

Bluetooth

®

audio

.

AUX (front)

Rear display:
.

DVD

.

USB memory with video files

.

AUX (front/rear)

JVH0243X

Front display

JVH0361X

Rear display

PLAYING DIGITAL VERSATILE DISC

(DVD)/USB
DISC·AUX button

Park the vehicle in a safe location and
apply the parking brake to operate the
DVD player while watching the images.
Push the DISC·AUX button on the instru-
ment panel and turn the display to the DVD
or USB mode.
When a DVD or USB is loaded, it will be
replayed automatically.
If “Auto Display” is set to ON in the settings
screen for the rear display, a DVD or USB
movie file will be read automatically when
the power is turned on. (See “REAR DIS-
PLAY settings” (P.4-14).)
The operation screen will be turned on
when the DISC·AUX button is pushed while
a DVD or USB movie file is being played,
and it will turn off automatically after a
period of time. To turn it on again, push the
DISC·AUX button again.

DVD/USB operation keys

To operate the DVD/USB movie file, select
the preferred key displayed on the opera-
tion screen using the INFINITI controller.

Monitor, climate, audio, phone and voice recognition systems

4-97

Condition:

(304,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-98

Monitor, climate, audio, phone and voice recognition systems

If you perform an operation with the
remote controller, a symbol will be dis-
played on the lower left part of the rear
seat screens indicating the function per-
formed. This symbol will automatically turn
off if no remote controller operation is
performed for a specified period of time.

Pause:

Select the “

” key and push the ENTER

button to pause the DVD/USB movie file. To
resume playing the DVD/USB movie file,
use the “PLAY” key.
To pause the DVD/USB movie file, it is also
possible to push the “

” button on the

keypad of the remote controller.

Play:

Select the “

” key and push the ENTER

button to start playing the DVD/USB movie
file, for example, after pausing the DVD/
USB movie file.
To start playing the DVD/USB movie file, it
is also possible to push the

button on

the keypad of the remote controller.

Stop:

Select the “

” key and push the ENTER

button to stop playing the DVD/USB movie
file.
To stop playing the DVD/USB movie file, it
is also possible to push the

button on

the keypad of the remote controller.

Skip (FORWARD):

Select the “

” key and push the ENTER

button to skip the chapter(s) of the disc
forward. The chapters will advance the
number of times the ENTER button is
pushed.
To skip the chapter(s) forward, it is also
possible to push the

button on the

keypad of the remote controller.

Skip (REWIND):

Select the “

” key and push the ENTER

button to skip the chapter(s) of the disc
backward. The chapters will go back the
number of times the ENTER button is
pushed.
To skip the chapter(s) backward, it is also
possible to push the

button on the

keypad of the remote controller.

/

Commercial Skip:

This function is only for DVD-VIDEO and
DVD-VR.
Select the “

” or “

” key to skip

forward or backwards by the set amount as
defined in the DVD settings menu.
To skip forward or backward, it is also
possible to push the

or

button on

the keypad of the remote controller.

Condition:

(305,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

SAA2498

Front screen

JVH0361X

Rear display

Setting menu

Select the “Settings” key on the display
with the INFINITI controller and push the
ENTER button to adjust the following
settings.
The items indicated with “ * ” can also be
set from the rear display. Push the SOURCE
button on the remote and select “DVD”/
“USB” shown on the rear screen while a
DVD/USB movie file is being played. Select
the preferred item using the select button

on the remote controller

and push the ENTER button.

Key (DVD-VIDEO):
Keys for the DVD menu operation are
displayed.

:

Move the cursor to select a DVD

menu.

Enter:

Enter the selected menu.

Move:

Change the display location by

moving the operation key.

Back:

Return to the previous screen.

Hide:

Hide the operation key.

Title Menu (front)/Menu (rear)* (DVD-VI-
DEO):
Menus specific to each disc will be shown.
For details, see the instructions attached to
the disc.
Title Search* (DVD-VIDEO):
A scene that belongs to a specified title will
be displayed each time the “+” side or “−”
side is selected.
10 Key Search* (DVD-VIDEO, VIDEO-CD,
CD-DA):
Select the “10 Key Search” key and push
the ENTER button to open the number entry
screen.
Input the number you want to search for
and select the “OK” key with the INFINITI
controller. Then push the ENTER button.
The specified Title/Chapter or Group/Track
will be played.
Angle* (DVD-VIDEO):
If the DVD contains different angles (such
as moving images), the current image
angle can be switched to another one.
Select the “Angle” key and push the ENTER
button. When the “+” side or “−” side is
selected, the angle will change.

Monitor, climate, audio, phone and voice recognition systems

4-99

Condition:

(306,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-100

Monitor, climate, audio, phone and voice recognition systems

Angle Mark (DVD-VIDEO):
When this item is turned on, an angle mark
will be shown on the bottom of the screen
if the scene can be seen from a different
angle.
Menu Skip (DVD-VIDEO):
DVD menus are automatically configured
and the contents will be played directly
when the “Menu Skip” key is turned on.
Note that some discs may not be played
directly even if this item is turned on.
CM Skip (DVD-VIDEO):
The amount of seconds for CM Skip can be
set to 15, 30 or 60 seconds.
DRC (DVD-VIDEO):
DRC (Dynamic Range Compression) allows
tuning of the dynamic range of sound
recorded in the Dolby Digital format.
DOWN MIX (DVD-VIDEO) (if so equipped):
Convert a multi-channel recording to a
traditional two-channel (stereo) recording.
DVD Language (DVD-VIDEO, VIDEO-CD):
Select the “DVD Language” key and push
the ENTER button to open the number entry
screen.
Input the number corresponding to the

preferred language and select the “OK” key
with the INFINITI controller. Then push the
ENTER button. The DVD top menu language
will be changed to the one selected.
Display:
Adjust the image quality of the screen,
select the preferred adjustment items and
push the ENTER button.
Audio*:
Choose the preferred language using the
INFINITI controller and push the ENTER
button.
Subtitle* (DVD-VIDEO):
Choose the preferred language using the
INFINITI controller and push the ENTER
button.
To turn off the subtitles, push and hold the
ENTER button until a beep sounds.
Display Mode (DVD-VIDEO, VIDEO-CD):
Choose from the “Full”, “Wide”, “Normal”
or “Cinema” mode using the INFINITI
controller and push the ENTER button
again.
Play Mode:
Choose the preferred play mode using the
INFINITI controller and push the ENTER

button.
Surround Information* (if so equipped):
Display surround sound information.

Remote controller operation

Use the remote controller to adjust the
following items.
Rear display select switch:
To activate the left screen or right screen,
move the rear display select switch on the
remote controller to the side correspond-
ing to the screen you want to activate (L or
R).

POWER button:

The rear displays can be activated or
deactivated individually.
To activate or deactivate the rear displays,
push the

button on the remote con-

troller.
SOURCE button:
The media available for playback will be
displayed when the SOURCE button is
pushed.
MENU button:
Push the MENU button to display the
operation screen for the source that is

Condition:

(307,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

being played.

Select button:

Push the select button

,

to

select the items displayed on the rear
screen.
ENTER button:
Push the ENTER button to confirm the
setting for the selected item.
SETUP button:
Push the SETUP button to display the rear
seat display settings. (See “Rear display
settings” (P.4-101).)
BACK button:
Push to go back to the previous screen or
cancel the selection.
Volume:
To adjust the speaker volume push

or

on the volume control button.

This button is used to control the volume
from the vehicle speakers. To adjust the
volume of the headphones, use the volume
knob that is attached to the headphones.

Keypad:

:

PLAY/PAUSE button

:

STOP button

:

FORWARD button

:

REWIND button

:

FORWARD button for commercial skip (for

DVD-VIDEO and DVD-VR)

:

REWIND button for commercial skip (for

DVD-VIDEO and DVD-VR)

Key illumination button:
If the key illumination button is pushed,
the buttons on the remote controller will be
lit up.

Rear display settings

Display mode adjustment of the rear seat
displays can be performed while a DVD or
USB movie is being played. Set the rear
display select switch on the remote con-
troller to either L or R according to the
display you want to set, and then push the
SETUP button. It is not possible to make
display mode adjustments to the left and
right displays at the same time.
Aspect:
Select the display size from “FULL”, “NOR-
MAL”, “CINEMA” or “WIDE”.

Picture Mode:
Select the Picture Mode from “NORMAL”,
“DYNAMIC”, “CINEMA”, “GAME” .
To adjust the display brightness automati-
cally, select the “Brightness” key and then
select from “DARKER”, “NORMAL” or
“BRIGHTER”. When adjusting manually,
select “OFF” and push ENTER button on
the remote controller.
To adjust tint, color or contrast, select a key
using the select button (

or

), push

ENTER on the remote controller.
Push the BACK button on the remote
controller to apply the settings and return
to the previous display.
To return the adjustment levels to the
default value, select “Execute” next to
“Initialization” push the select button
(

,

) on the remote controller and

push the ENTER button. The “Execute” key
is deactivated when the picture mode
settings are already in the default value.
Color System:
To choose the color system, select from
“NTSC”, “PAL”, “PAL-60”, “PAL-M”, “PAL-
N” or “AUTO” .

Monitor, climate, audio, phone and voice recognition systems

4-101

Condition:

(308,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-102

Monitor, climate, audio, phone and voice recognition systems

3D Y/C filter:

Set to ON/OFF push the select button
(

or

) and push ENTER button on

the remote controller. When turned on,
small characters and an outline of the
shapes will be displayed more clearly than
when turned off.
AUX Volume Setting:
This is only active when in the Rear AUX
mode. To set the AUX volume, select from
“HIGH”, “LOW” or “MIDDLE” .

OPERATING TIPS

.

The images from a device that is

connected to the rear auxiliary input
jacks cannot be viewed on the front
displays.

.

It is not possible to display different

video files, such as DVD or video files in
the USB memory, on the front and rear
displays at the same time.

.

It is not possible to play an audio file

and a video file in the same USB
memory at the same time.

Multiple source display

It is possible to play different sources on
each display. The following example shows
how to operate multiple sources.

It is also possible to set in the front
display. For more details, see “REAR DIS-
PLAY settings” (P.4-14).
1. Display a video file in the front display

by selecting the DVD mode.

2. Set the rear display select switch on the

remote controller to the L side and push
the POWER button. The left rear display
will turn on and the DVD screen will be
displayed.
(If “Auto Display” is set to ON, the
display will turn on automatically.)

3. Set the rear display select switch on the

remote controller to the R side and
push the POWER button. The right rear
display will turn on and the DVD screen
will be displayed.
(If “Auto Display” is set to ON, the
display will turn on automatically.)

4. Switch the source on the front display

to an audio source. The sound from the
speakers switches according to the
front display. The rear display con-
tinues to display the DVD.

5. Turn on a pair of headphones and listen

to the DVD on the rear displays using
the headphones.

6. Connect an auxiliary device to the AUX

jack, set the rear display select switch
to the L or R side and push the SOURCE
button to select “Rear AUX”. The
selected side of the rear display will
switch to the AUX mode. The other rear
display will continue to display the
DVD.

7. Turn on the other pair of headphones. If

the sound from the headphones is not
from the AUX jacks, switch the channel
with the channel select switch on the
headphones.

CARE AND MAINTENANCE

Use a lightly dampened, lint free cloth to
clean the surfaces of your Dual Head
Restraint DVD System (DVD player face,
screen, remote controller, etc.).

CAUTION

.

Do not use any solvents or cleaning
solutions when cleaning the video sys-
tem.

.

Do not use excessive force on the
monitor screen.

.

Avoid touching or scratching the monitor

Condition:

(309,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

screen as it may become dirty or
damaged.

.

Do not attempt to operate the system in
extreme temperature conditions [below
−48F (−208C) and above 1588F (708C)].

.

Do not attempt to operate the system in
extreme humidity conditions (less than
10% or more than 75%).

When installing a car phone or a CB radio
in your vehicle, be sure to observe the
following cautions, otherwise the new
equipment may adversely affect the elec-
tronic control modules and electronic con-
trol system harness.

WARNING

.

A cellular phone should not be used for
any purpose while driving so full atten-
tion may be given to vehicle operation.
Some jurisdictions prohibit the use of
cellular phones while driving.

.

If you must make a call while your
vehicle is in motion, the hands-free
cellular phone operational mode (if so
equipped) is highly recommended. Ex-
ercise extreme caution at all times so full
attention may be given to vehicle opera-
tion.

.

If a conversation in a moving vehicle
requires you to take notes, pull off the
road to a safe location and stop your
vehicle before doing so.

CAUTION

.

Keep the antenna as far away as
possible from the electronic control
modules.

.

Keep the antenna wire more than 8 in (20
cm) away from the electronic control
system harness. Do not route the anten-
na wire next to any harness.

.

Adjust the antenna standing-wave ratio
as recommended by the manufacturer.

.

Connect the ground wire from the CB
radio chassis to the body.

.

For details, it is recommended you visit
an INFINITI retailer.

Monitor, climate, audio, phone and voice recognition systems

4-103

CAR PHONE OR CB RADIO

Condition:

(310,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-104

Monitor, climate, audio, phone and voice recognition systems

WARNING

.

Use a phone after stopping your vehicle
in a safe location. If you have to use a
phone while driving, exercise extreme
caution at all times so full attention may
be given to vehicle operation.

.

If you find yourself unable to devote full
attention to vehicle operation while
talking on the phone, pull off the road
to a safe location and stop your vehicle
before doing so.

CAUTION

To avoid draining the vehicle battery, use a
phone after starting the engine.

Your INFINITI is equipped with Bluetooth

®

Hands-Free Phone System. If you are an
owner of a compatible Bluetooth

®

enabled

cellular phone, you can set up the wireless
connection between your cellular phone
and the in-vehicle phone module. With
Bluetooth

®

wireless technology, you can

make or receive a telephone call with your
cellular phone in your pocket.

Once a cellular phone is connected to the
in-vehicle phone module, no phone con-
necting procedure is required anymore.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is pushed to the ON
position with the registered cellular phone
turned on and carried in the vehicle.
You can register up to 5 different Blue-
tooth

®

cellular phones in the in-vehicle

phone module. However, you can talk on
only one cellular phone at a time.
The INFINITI Voice Recognition system
supports the phone commands, so dialing
a phone number using your voice is
possible. For more details, see “INFINITI
Voice Recognition system” (P.4-114).
Before using the Bluetooth

®

Hands-Free

Phone System, refer to the following notes.
.

Wireless LAN (Wi-Fi) and the Bluetooth

®

functions share the same frequency
band (2.4 GHz). Using the Bluetooth

®

and the wireless LAN functions at the
same time may slow down or discon-
nect the communication and cause
undesired noise. It is recommended
that you turn off the wireless LAN (Wi-Fi)
when using the Bluetooth

®

functions.

.

Set up the wireless connection between

a compatible cellular phone and the in-
vehicle phone module before using the
Bluetooth

®

Hands-Free Phone System.

.

Some Bluetooth

®

enabled cellular

phones may not be recognized by the
in-vehicle phone module. Please visit
www.InfinitiUSA.com/bluetooth for a
recommended phone list.

.

You will not be able to use a hands-free

phone under the following conditions:
— Your vehicle is outside of the tele-

phone service area.

— Your vehicle is in an area where it is

difficult to receive radio waves; such
as in a tunnel, in an underground
parking garage, behind a tall build-
ing or in a mountainous area.

— Your cellular phone is locked in

order not to be dialed.

.

When the radio wave condition is not

ideal or ambient sound is too loud, it
may be difficult to hear the other
person’s voice during a call.

.

Immediately after the ignition switch is

pushed to the ON position, it may be
impossible to receive a call for a short
period of time.

Bluetooth

®

HANDS-FREE PHONE SYSTEM

Condition:

(311,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

.

Do not place the cellular phone in an

area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.

.

While a cellular phone is connected

through the Bluetooth

®

wireless con-

nection, the battery power of the
cellular phone may discharge quicker
than usual.

.

If the Bluetooth

®

Hands-Free Phone

System seems to be malfunctioning,
please visit www.InfinitiUSA.com/blue-
tooth for troubleshooting help.

.

Some cellular phones or other devices

may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a
different location may reduce or elim-
inate the noise.

.

Refer to the cellular phone Owner’s

Manual regarding the telephone pair-
ing procedure specific to your phone,
battery charging, cellular phone anten-
na, etc.

.

The antenna display on the monitor will

not coincide with the antenna display
of some cellular phones.

.

Keep the interior of the vehicle as quiet

as possible to hear the caller’s voice
clearly as well as to minimize its
echoes.

.

If reception between callers is unclear,

adjusting the incoming or outgoing call
volume may improve the clarity.

REGULATORY INFORMATION
FCC Regulatory information

.

CAUTION: To maintain compliance with

FCC’s RF exposure guidelines, use only
the supplied antenna. Unauthorized
antenna, modification, or attachments
could damage the transmitter and may
violate FCC regulations.

.

Operation is subject to the following

two conditions:

1. this device may not cause interference

and

2. this device must accept any interfer-

ence, including interference that may
cause undesired operation of the de-
vice

IC Regulatory information

.

Operation is subject to the following

two conditions: (1) this device may not
cause interference, and (2) this device

must accept any interference, including
interference that may cause undesired
operation of the device.

.

This Class B digital apparatus meets all

requirements of the Canadian Interfer-
ence-Causing Equipment Regulations.

Bluetooth trademark:

Bluetooth

®

is a trademark

owned by Bluetooth SIG, Inc.,

and licensed to Clarion Co., Ltd.

VOICE COMMANDS

You can use voice commands to operate
various Bluetooth

®

Hands-Free Phone Sys-

tem features using the INFINITI Voice
Recognition system.
For more details, see “INFINITI Voice
Recognition system” (P.4-114).

Monitor, climate, audio, phone and voice recognition systems

4-105

Condition:

(312,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

4-106

Monitor, climate, audio, phone and voice recognition systems

SAA3163

CONTROL BUTTONS

1)

PHONE SEND button

JVH0473X

CONNECTING PROCEDURE

1. Push the

button, and select the

“Connect Phone” key.

SAA2520

2. When a PIN code appears on the

screen, operate the compatible Blue-
tooth

®

cellular phone to enter the PIN

code.
The connecting procedure of the cellu-
lar phone varies according to each
cellular phone. See the cellular phone
Owner’s Manual for the details. You can
also visit
www.InfinitiUSA.com/bluetooth or call
INFINITI Consumer Affairs Department
for instructions on pairing INFINITI
recommended cellular phones.
When the connection process is com-
pleted, the screen will return to the

Condition:

(313,1)

Model: 2017MY INFINITI QX80(Z62) OM17E00Z62U0 ]

Phone menu display.

PHONE SELECTION

Up to 5 cellular phones can be registered to
the system. To switch to connect another
cellular phone, push PHONE button and
select the “Connected Phones” key. The
registered cellular phones are shown on
the list. If you select a cellular phone that is
different from the one currently connected,
the newly selected phone will be con-
nected to the system.

QUICK DIAL

This vehicle has two phonebooks available
for hands-free use. Depending on the
phone, the system may automatically
download the entire cell phone’s phone-
book into the “Phonebook”. For the details
about downloading a phonebook, see
“Phone setting” (P.4-111). If a phonebook
does not automatically download, the
Quick Dial may be set for up to 40 entries.
This Quick Dial allows the recording of a
name to speak while using voice recogni-
tion.

JVH1509X

1. Push the

button and select the

“Quick Dial” key.

2. Select the “Add New” key at the top of

the screen.

JVH1407X

3. Choose the method for entering the

Quick Dial entry. For this example,
select “Enter Number by Keypad”.

4. Enter the digits and select the “OK”

key. (See “How to use touch screen”
(P.4-4).)

Monitor, climate, audio, phone and voice recognition systems

4-107

Condition: