Infiniti G35 (V35) Sedan. Manual — part 1387
![](/vehicles/zatt/tenge/outheneren/cak.png)
TM-240
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
CONTROL VALVE WITH TCM
CONTROL VALVE WITH TCM
Exploded View
INFOID:0000000000957152
Removal and Installation
INFOID:0000000000957153
REMOVAL
1.
Disconnect the battery cable from the negative terminal.
2.
Drain ATF through drain plug.
3.
Remove exhaust mounting bracket. Refer to
1.
A/T
2.
Snap ring
3.
Sub-harness
4.
Bracket
5.
Control valve with TCM
6.
Bracket
7.
A/T fluid temperature sensor 2
8.
Oil pan gasket
9.
Clip
10. Oil pan mounting bolt
11.
Oil pan
12. Magnet
13. Drain plug
14. Drain plug gasket
15. Terminal cord assembly
16. O-ring
Refer to
for symbols in the figure.
SCIA8270E
![](/vehicles/zatt/tenge/outheneren/menecora.png)
CONTROL VALVE WITH TCM
TM-241
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4.
Disconnect heated oxygen sensor 2 harness connectors (A).
5.
Remove heated oxygen sensor 2 harness (B) from clips (1).
6.
Remove bracket (2) from transmission assembly.
7.
Disconnect A/T assembly harness connector.
8.
Remove snap ring (1) from A/T assembly harness connector
(A).
9.
Push A/T assembly harness connector (A).
CAUTION:
Be careful not to damage connector.
10. Remove clips (1).
11. Remove oil pan (2) and oil pan gasket.
12. Remove magnets (1) from oil pan.
: Vehicle front
: Bolt
SCIA8269E
JPDIA0007ZZ
JPDIA0008ZZ
3
: Drain plug
: Vehicle front
: Oil pan mounting bolt
SCIA8117E
JPDIA0009ZZ
![](/vehicles/zatt/tenge/outheneren/viper.png)
TM-242
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
CONTROL VALVE WITH TCM
13. Disconnect A/T fluid temperature sensor 2 connector (A).
CAUTION:
Be careful not to damage connector.
14. Disengage terminal clips (
).
15. Disconnect revolution sensor connector (A).
CAUTION:
Be careful not to damage connector.
16. Disengage terminal clip (
).
17. Remove bolts A, B and C from control valve with TCM.
18. Remove control valve with TCM from transmission case.
CAUTION:
When removing, be careful with the manual valve (1) notch
and manual plate (2) height. Remove it vertically.
19. Remove A/T fluid temperature sensor 2 (1) with bracket (2) from
control valve with TCM.
SCIA8124E
JPDIA0011ZZ
: Vehicle front
Bolt symbol
Length
mm (in)
Number of bolts
A
42 (1.65)
5
B
55 (2.17)
6
C
40 (1.57)
1
SCIA8074E
JPDIA0012ZZ
: Bolt
JPDIA0013ZZ
![](/vehicles/zatt/tenge/outheneren/tsost.png)
CONTROL VALVE WITH TCM
TM-243
< ON-VEHICLE REPAIR >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
20. Remove bracket (1) from A/T fluid temperature sensor 2 (2).
21. Remove O-ring (1) from A/T assembly harness connector (A).
22. Disconnect TCM connectors (A) and (B).
CAUTION:
Be careful not to damage connectors.
23. Remove A/T assembly harness connector (A) from control valve
with TCM using flat-blade screwdriver (B).
24. Disconnect TCM connector (A) and park/neutral position switch
connector (B).
CAUTION:
Be careful not to damage connectors.
JPDIA0014ZZ
JPDIA0015ZZ
JPDIA0016ZZ
JPDIA0017ZZ
JPDIA0018ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст