Infiniti G35 (V35) Sedan. Manual — part 95
![](/vehicles/zatt/tenge/utoanga/yoffeckebjve.png)
AV-152
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
U1000 CAN COMM CIRCUIT
COMPONENT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000000964639
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN-H, CAN-L) allowing a high rate of information transmission with less wiring. Each
control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. Refer to
LAN-28, "CAN Communication Signal Chart"
DTC Logic
INFOID:0000000000964640
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000000964641
1.
PERFORM SELF DIAGNOSTIC
1.
Turn ignition switch ON and wait for 2 second or more.
2.
Check “Self Diagnostic Result” of “MULTI AV”.
Is “CAN COMM CIRCUIT” displayed?
YES
>> Refer to “LAN system”. Refer to
LAN-18, "Trouble Diagnosis Flow Chart"
NO
>> Refer to GI section. Refer to
GI-39, "Intermittent Incident"
.
DTC
Display contents of CON-
SULT-III
Diagnostic item is detected when ...
Probable malfunction location
U1000
CAN COMM CIRCUIT
When AV control unit is not transmitting or re-
ceiving CAN communication signal for 2 sec-
onds or more.
CAN communication system
![](/vehicles/zatt/tenge/utoanga/oun.png)
AV
U1010 CONTROL UNIT (CAN)
AV-153
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
U1010 CONTROL UNIT (CAN)
Description
INFOID:0000000000964642
Initial diagnosis of AV control unit.
DTC Logic
INFOID:0000000000964643
DTC DETECTION LOGIC
Diagnosis Procedure
INFOID:0000000000964644
1.
REPLACE AV CONTROL UNIT
When DTC U1010 is detected, replace AV control unit.
>> INSPECTION END
DTC
Display contents of CON-
SULT-III
Diagnostic item is detected when ...
Probable malfunction location
U1010
CONTROL UNIT (CAN)
CAN initial diagnosis malfunction is detected
AV control unit
![](/vehicles/zatt/tenge/utoanga/louse.png)
AV-154
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
U1310 AV CONTROL UNIT
U1310 AV CONTROL UNIT
Description
INFOID:0000000000964645
Replace the AV control unit if this DTC is displayed. Refer to
.
DTC Logic
INFOID:0000000000964646
Part name
Description
AV CONTORL UNIT
• It is the master unit of the MULTI AV system, and it is connected to each control
unit by means of communication. It operates each system according to com-
munication signals from the AV control unit.
• AV control unit includes audio function and vehicle information function.
• It is connected to ECM and unified meter and A/C amp via CAN communica-
tion to obtain necessary information for the vehicle information function.
• It inputs the automatic brightness ON/OFF signals that are required for the dis-
play dimming control.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
DTC
Display contents of
CONSULT-III
DTC Detection Condition
Action to take
U1310
CONTROL UNIT (AV)
[U1310]
An initial diagnosis error is detected in AV communication
circuit.
Replace AV control unit
![](/vehicles/zatt/tenge/utoanga/minde.png)
AV
U1200 AV CONTROL UNIT
AV-155
< COMPONENT DIAGNOSIS >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
N
A
O
P
U1200 AV CONTROL UNIT
Description
INFOID:0000000000964647
Replace the AV control unit if this DTC is displayed. Refer to
DTC Logic
INFOID:0000000000964648
Part name
Description
AV CONTORL UNIT
• It is the master unit of the MULTI AV system, and it is connected to each control
unit by means of communication. It operates each system according to com-
munication signals from the AV control unit.
• AV control unit includes audio function and vehicle information function.
• It is connected to ECM and unified meter and A/C amp via CAN communica-
tion to obtain necessary information for the vehicle information function.
• It inputs the automatic brightness ON/OFF signals that are required for the dis-
play dimming control.
• It inputs the signals for driving status recognition (vehicle speed, reverse and
parking brake).
DTC
Display contents of
CONSULT-III
DTC Detection Condition
Action to take
U1200
Cont Unit
FLASH- ROM
[U1200]
An internal malfunction is detected in AV control unit
(FLASH-ROM).
Replace AV control unit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст