Infiniti G35 (V35) Sedan. Manual — part 823
![](/vehicles/zatt/tenge/utoanga/wech.png)
INT-16
< ON-VEHICLE REPAIR >
BODY SIDE TRIM
3.
Remove center pillar upper garnish mounting metal clips with a
screwdriver (A), and then remove center pillar upper garnish (1).
REAR WHEEL HOUSE GARNISH
1.
Remove rear seat cushion and rear seat back. Refer to
SE-105, "Removal and Installation"
2.
Remove rear body side welt.
3.
Remove rear wheel house garnish mounting clips using a
remover tool (A), and then remove rear wheel house garnish (1).
REAR PILLAR FINISHER
1.
Remove rear seat cushion and rear seatback. Refer to
SE-105, "Removal and Installation"
.
2.
Remove rear seat belt floor anchor bolt. Refer to
SB-10, "SEAT BELT RETRACTOR : Removal and Instal-
.
3.
Remove rear kicking plate inner.
4.
Remove rear body side welt.
5.
Remove rear wheel house garnish.
6.
Remove pillar finisher mounting clips and metal clips with a
remover tool (A), and then remove pillar finisher (1).
CAUTION:
Insert a clip clamp remover wrapped with a shop cloth or
remover tool into the part shown by the arrow (between the
clips and the body side panel).
: Metal clip
JMJIA0087GB
: Clip
JMJIA0088GB
: Clip
: Pawl
: Metal clip
JMJIA0089GB
PIIB2768J
BODY SIDE TRIM
INT-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.
![](/vehicles/zatt/tenge/utoanga/posifu.png)
INT-18
< ON-VEHICLE REPAIR >
REAR PARCEL SHELF FINISHER
REAR PARCEL SHELF FINISHER
Exploded View
INFOID:0000000000960438
Removal and Installation
INFOID:0000000000960439
REMOVAL
1.
Remove trunk front finisher upper. Refer to
INT-27, "Removal and Installation"
2.
Disconnect high-mounted stop lamp harness connector (A).
(without REAR SPOILER)
1.
Rear parcel shelf finisher
2.
Rear parcel side cover (RH)
3.
Rear parcel side cover (LH)
4.
Woofer grille
5.
High-mounted stop lamp cover
6.
High-mounted stop lamp assembly
7.
Child anchor cover
8.
Rear seat belt finisher
9.
Seatback center finisher
10. Seatback finisher welt
11. Push on nut
Clip
Pawl
JMJIA0068GB
JMJIA0090GB
![](/vehicles/zatt/tenge/utoanga/zenalifo.png)
REAR PARCEL SHELF FINISHER
INT-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
3.
Remove rear seat cushion and rear seatback. Refer to
SE-105, "Removal and Installation"
.
4.
Remove rear kicking plate inner, rear wheelhouse garnish, rear pillar finisher. Refer to
5.
Remove seatback center finisher mounting clips, and then remove seatback center finisher.
6.
Remove rear seat belt floor anchor bolt and rear seat belt shoulder anchor bolt. Refer to
BELT RETRACTOR : Removal and Installation"
.
7.
Remove rear parcel shelf finisher mounting clips (A).
8.
Remove clips from rear of rear parcel shelf finisher, and then remove rear parcel shelf finisher.
9.
Remove the following parts after removing rear parcel shelf finisher.
• Child anchor cover.
• Woofer grille.
• High-mounted stop lamp. (without REAR SPOILER) Refer to
EXL-199, "WITHOUT REAR SPOILER :
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Check that clips are securely fitted in panel holes on body when installing, and then press them in.
JMJIA0091GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст