Infiniti G35 (V35) Sedan. Manual — part 1217
![](/vehicles/zatt/tenge/utoanga/hea.png)
SRC-16
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (AIRBAG)
DIAGNOSTIC PROCEDURE (User mode)
Checking Air bag operation according to “AIR BAG” Warning Lamp-User Mode
1.
Turn the ignition switch from OFF to ON, and check that the air bag warning lamp blinks.
2.
Compare the SRS air bag warning lamp blinking pattern with the
examples.
Warning lamp examples (User mode)
BF-1845D
“AIR BAG” warning lamp operation -User mode
SRS condition
Reference item
• No malfunction is detected.
• No further action is necessary.
—
• The system is malfunctioning and
needs to be repaired as indicated.
Go to
.
SHIA0011E
SHIA0012E
![](/vehicles/zatt/tenge/utoanga/alindi.png)
DIAGNOSIS SYSTEM (AIRBAG)
SRC-17
< FUNCTION DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
DIAGNOSTIC PROCEDURE (With CONSULT-lll)
CONSULT-III Function
INFOID:0000000000959595
DIAGNOSIS MODE FOR CONSULT-IIl
• “SELF-DIAG [CURRENT]”
A current self-diagnosis results (also indicated with the number of warning lamp fblinking in diagnosis mode)
are displayed on CONSULT-IIl screen in real time. This refers to a malfunctioning part requiring repairs.
• “SELF-DIAG [PAST]”
Diagnosis results previously stored in the memory are displayed on CONSULT-IlI screen. The stored results
are not erased until memory erasing is executed.
• “TROUBLE DIAG RECORD”
With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed
on CONSULT-IlI screen.
• “ECU DISCRIMINATED NO.”
The diagnosis sensor unit for each vehicle model is assigned with its own individual classification number.
This number will be displayed on CONSULT-lII screen, as shown. When replacing the diagnosis sensor unit,
refer to the part number for the compatibility. After installation, replacement with a correct unit can be
checked by confirming this classification number on CONSULT-IlI screen.
After repair, check that the discriminated number of diagnosis sensor unit installed to vehicle are same.
Refer to
SR-16, "Removal and Installation"
.
HOW TO CHANGE SELF-DIAGNOSIS MODE WITH CONSULT-IIl
From User Mode to Diagnosis Mode
After selecting “AIR BAG” on the “SELECT SYSTEM” screen, User mode automatically changes to Diagnosis
mode.
• Air bag is deployed.
• Seat belt pre-tensioner is deployed.
Go to
"Diagnosis Procedure (Component
or
"Diagnosis Procedure (Component
• Diagnosis sensor unit is malfunction-
ing.
• Air bag power supply circuit is mal-
functioning.
• SRS air bag warning lamp circuit is
malfunctioning.
• Diagnosis sensor unit is malfunction-
ing.
• Air bag warning lamp circuit is mal-
functioning.
“AIR BAG” warning lamp operation -User mode
SRS condition
Reference item
SHIA0013E
SHIA0014E
Diagnostic Mode
Description
SELF-DIAG RESULT
The self-diagnosis result is displayed. (SELF-DIAG [CURRENT], [PAST], [RECORD])
ECU DISCRIMINATED No.
The part number of diagnosis sensor unit is displayed.
![](/vehicles/zatt/tenge/utoanga/meanour.png)
SRC-18
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (AIRBAG)
From Diagnosis Mode to User Mode
To return to User mode from Diagnosis mode, touch “BACK” key of CONSULT-lII until “SELECT SYSTEM”
appears, then diagnosis mode automatically changes to User mode.
SELF-DIAGNOSIS FUNCTION (Without CONSULT-lll)
• The reading of these results is accomplished by “User mode” and “Diagnosis mode”.
• After a malfunction is repaired, turn ignition switch ON. Diagnosis mode returns to the user mode. At that
time, the self-diagnosis result is cleared.
HOW TO CHANGE SELF-DIAGNOSIS MODE WITHOUT CONSULT-IIl
Diagnostic Tool Function
INFOID:0000000000959596
Commercial Service Tools
PHIA0709E
Tool name
Description
Tamper resistant TORX bit
Size: T30/T50
S-NT757
![](/vehicles/zatt/tenge/utoanga/myon.png)
B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
SRC-19
< COMPONENT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
COMPONENT DIAGNOSIS
B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
Description
INFOID:0000000000959597
DTC B1001, B1002, B1003, B1004, B1005 DIAGNOSIS SENSOR UNIT
Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the air
bag warning lamp in the combination meter Malfunctioning part can be detected by on board self-diagnosis
system and electro-diagnosis tester “CONSULT-lll”.
OPERATION
It detects a shock that exceeds specified level and watches such systems as the driver and passenger air bag,
side air bag, curtain air bag, pre-tensioner seat belts and Occupant Classification System (OCS) operate prop-
erly.
STRUCTURE
It contains the “G” sensors of both for frontal collision and for side collision and spare battery function in case
of main battery damage in collision.
INSTALLATION
SRS diagnosis sensor unit is installed under the center console with fixed bolts.
DTC Logic
INFOID:0000000000959598
DTC DETECTION LOGIC
With CONSULT-lll
DTC No. Index (“SELF-DIAG [CURRENT]”), (“SELF-DIAG [PAST]” or “TROUBLE DIAG RECORD”)
Without CONSULT-lll
Warning Lamp Flash Code Chart
DTC CONFIRMATION PROCEDURE (With CONSULT-lll)
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2.
2.
CONSULT-LLL
DTC No.
Trouble diagnosis name
DTC detecting condition
Possible cause
B1001
B1002
B1003
B1004
B1005
CONTROL UNIT
Diagnosis sensor unit is out of order.
1.
Replace diagnosis sensor unit
(ACU).
JMHIA0034GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст