Infiniti EX35. Manual — part 1467
![](/vehicles/zatt/rylld/ivere/juruinomeli.png)
TM-256
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
Disassembly
INFOID:0000000003130659
1.
Compress snap ring using 2 flat-bladed screwdrivers.
2.
Remove front carrier assembly and input clutch assembly from
rear internal gear.
3.
Remove front carrier assembly from input clutch assembly.
4.
Remove bearing race from front carrier assembly.
5.
Remove needle bearing from front carrier assembly.
6.
Remove snap ring from front carrier assembly.
CAUTION:
Do not expand snap ring excessively.
SCIA5339E
SCIA2847E
SCIA5233E
SCIA5476E
![](/vehicles/zatt/rylld/ivere/arud.png)
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
TM-257
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
7.
Remove O-ring and seal rings from input clutch assembly.
8.
Remove needle bearing from input clutch assembly.
9.
Using a flat-bladed screwdriver, remove snap ring from input
clutch drum.
10. Remove drive plates, driven plates, dish plate and retaining
plate from input clutch drum.
Assembly
INFOID:0000000003130660
1.
Install drive plates, driven plates, dish plate and retaining plate
in input clutch drum.
CAUTION:
Check order of plates.
SCIA5235E
SCIA2853E
SCIA2864E
1
: Snap ring
2
: Retaining plate
3
: Drive plate
4
: Driven plate
5
: Dish plate
7 /7
: Drive plate / Driven plate
JPDIA0557ZZ
![](/vehicles/zatt/rylld/ivere/zkn.png)
TM-258
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
2.
Using a flat-bladed screwdriver, install snap ring in input clutch
drum.
3.
Install needle bearing in input clutch assembly.
CAUTION:
Check the direction of needle bearing. Refer to
"Location of Adjusting Shims, Needle Bearings, Thrust
Washers and Snap Rings"
.
4.
Install O-ring and seal rings in input clutch assembly.
5.
Install snap ring to front carrier assembly.
CAUTION:
Do not expand snap ring excessively.
6.
Install needle bearing in front carrier assembly.
CAUTION:
Check the direction of needle bearing. Refer to
"Location of Adjusting Shims, Needle Bearings, Thrust
Washers and Snap Rings"
.
SCIA2864E
SCIA2853E
SCIA5235E
SCIA5476E
SCIA5233E
![](/vehicles/zatt/rylld/ivere/ammed.png)
FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR
TM-259
< DISASSEMBLY AND ASSEMBLY >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
7.
Install bearing race in front carrier assembly.
8.
Install front carrier assembly to input clutch assembly.
9.
Compress snap ring using 2 flat-bladed screwdrivers.
10. Install front carrier assembly and input clutch assembly to rear
internal gear.
Inspection
INFOID:0000000003130661
• Front Carrier Snap Ring
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the snap ring.
• Input Clutch Snap Ring
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the input clutch assembly.
• Input Clutch Drum
Check for deformation, fatigue or damage or burns.
CAUTION:
If necessary, replace the input clutch assembly.
• Input Clutch Drive Plates and Driven Plates
Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
• Input Clutch Retaining Plate and Dish Plate
Check facing for burns, cracks or damage.
CAUTION:
If necessary, replace the input clutch assembly.
• Front Carrier
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the front carrier assembly.
• Rear Internal Gear
Check for deformation, fatigue or damage.
CAUTION:
If necessary, replace the rear internal gear.
SCIA2847E
SCIA5339E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст