Infiniti EX35. Manual — part 1189
![](/vehicles/zatt/rylld/ivere/thive.png)
PWC-20
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
3.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
Check front power window motor (driver side).
Refer to
PWC-20, "DRIVER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace power window motor (driver side). Refer to
GW-20, "Removal and Installation"
.
4.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
>> INSPECTION END
DRIVER SIDE : Component Inspection
INFOID:0000000003573474
1.
CHECK FRONT POWER WINDOW MOTOR (DRIVER SIDE)
1.
Turn ignition switch OFF.
2.
Disconnect front power window motor (driver side) connector.
3.
Check motor operate by connecting the battery voltage directly to front power window motor (driver side)
connector.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace front power window motor (driver side). Refer to
GW-20, "Removal and Installation"
.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000003573475
Door glass moves UP/DOWN by receiving the signal from power window main switch or front power window
switch (passenger side).
PASSENGER SIDE : Component Function Check
INFOID:0000000003573476
1.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) OPERATION
Check front power window motor (passenger side) operation with power window main switch or front power
window switch (passenger side).
Is the inspection result normal?
YES
>> Power window motor (passenger side) is OK.
NO
>> Refer to
PWC-20, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000003573477
1.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front power window motor (passenger side) connector.
3.
Turn ignition switch ON.
4.
Check voltage between front power window motor (passenger side) harness connector and ground.
Front power window motor (driver side)
Motor condition
Connector
Terminal
(+)
(–)
D10
1
2
DOWN
2
1
UP
![](/vehicles/zatt/rylld/ivere/frut.png)
POWER WINDOW MOTOR
PWC-21
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect front power window switch (passenger side) connector.
3.
Check continuity between front power window switch (passenger side) harness connector and front power
window motor (passenger side) harness connector.
4.
Check continuity between front power window switch (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace front power window switch (passenger side).
PWC-112, "Removal and Installation"
.
NO
>> Repair or replace harness.
3.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE)
Check front power window motor (passenger side).
Refer to
PWC-21, "PASSENGER SIDE : Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace front power window motor (passenger side). Refer to
GW-20, "Removal and Installation"
.
4.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
.
>> INSPECTION END
PASSENGER SIDE : Component Inspection
INFOID:0000000003573478
1.
CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE)
1.
Turn ignition switch OFF.
2.
Disconnect front power window motor (passenger side) connector.
3.
Check motor operate by connecting the battery voltage directly to front power window motor (passenger
side) connector.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Front power window motor (passenger side)
Connector
Terminal
D40
1
Ground
Front power win-
dow switch
(passenger side)
UP
0
DOWN
Battery voltage
2
UP
Battery voltage
DOWN
0
Front power window switch (passenger side)
Front power window motor (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
D38
9
D40
1
Existed
8
2
Front power window switch (passenger side)
Ground
Continuity
Connector
Terminal
D38
9
Not existed
8
![](/vehicles/zatt/rylld/ivere/hui.png)
PWC-22
< COMPONENT DIAGNOSIS >
POWER WINDOW MOTOR
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace front power window motor (passenger side). Refer to
GW-20, "Removal and Installation"
.
REAR LH
REAR LH : Description
INFOID:0000000003573479
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window
switch LH.
REAR LH : Component Function Check
INFOID:0000000003573480
1.
CHECK REAR POWER WINDOW MOTOR LH OPERATION
Check rear power window motor LH operation with power window main switch or rear power window switch
LH.
Is the inspection result normal?
YES
>> Rear power window motor LH is OK.
NO
>> Refer to
PWC-22, "REAR LH : Diagnosis Procedure"
REAR LH : Diagnosis Procedure
INFOID:0000000003573481
1.
CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear power window motor LH connector.
3.
Turn ignition switch ON.
4.
Check voltage between rear power window motor LH harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK REAR POWER WINDOW MOTOR LH CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect rear power window switch LH connector.
3.
Check continuity between rear power window switch LH harness connector and rear power window motor
LH harness connector.
Front power window motor (passenger side)
Motor condition
Connector
Terminal
(+)
(–)
D40
1
2
DOWN
2
1
UP
(+)
(–)
Condition
Voltage (V)
(Approx.)
Rear power window motor LH
Connector
Terminal
D52
1
Ground
Rear power win-
dow switch LH
UP
Battery voltage
DOWN
0
3
UP
0
DOWN
Battery voltage
Rear power window switch LH
Rear power window motor LH
Continuity
Connector
Terminal
Connector
Terminal
D54
4
D52
3
Existed
5
1
![](/vehicles/zatt/rylld/ivere/seer.png)
POWER WINDOW MOTOR
PWC-23
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
4.
Check continuity between rear power window switch LH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear power window switch LH.Refer to
PWC-112, "Removal and Installation"
.
NO
>> Repair or replace harness.
3.
CHECK REAR POWER WINDOW MOTOR LH
Check rear power window motor LH.
Refer to
PWC-23, "REAR LH : Component Inspection"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace rear power window motor LH. Refer to
GW-26, "Removal and Installation"
4.
CHECK INTERMITTENT INCIDENT
GI-38, "Intermittent Incident"
.
>> INSPECTION END
REAR LH : Component Inspection
INFOID:0000000003573482
COMPONENT INSPECTION
1.
CHECK REAR POWER WINDOW MOTOR LH
1.
Turn ignition switch OFF.
2.
Disconnect rear power window motor LH connector.
3.
Check motor operate by connecting the battery voltage directly to rear power window motor LH connector.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace rear power window motor LH. Refer to
GW-26, "Removal and Installation"
REAR RH
REAR RH : Description
INFOID:0000000003573483
Door glass moves UP/DOWN by receiving the signal from power window main switch or rear power window
switch RH.
REAR RH : Component Function Check
INFOID:0000000003573484
1.
CHECK REAR POWER WINDOW MOTOR RH OPERATION
Check rear power window motor RH operation with power window main switch or rear power window switch
RH.
Is the inspection result normal?
YES
>> Rear power window motor RH is OK.
NO
>> Refer to
PWC-24, "REAR RH : Diagnosis Procedure"
.
Rear power window switch LH
Ground
Continuity
Connector
Terminal
D54
4
Not existed
5
Rear power window motor LH
Motor condition
Connector
Terminal
(+)
(–)
D52
3
1
DOWN
1
3
UP
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст