Infiniti G37 Coupe. Manual — part 408
![](/vehicles/zatt/keash/ckiif/dyked.png)
KEY ID WARNING DOES NOT OPERATE
DLK-193
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY ID WARNING DOES NOT OPERATE
Description
INFOID:0000000001697134
NOTE:
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm
the list above twice in order to ensure proper operation. Refer to
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000001697135
1.
CHECK INTELLIGENT KEY
Check Intelligent Key.
Refer to
DLK-99, "Component Function Check"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function.
Refer to
DLK-103, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
![](/vehicles/zatt/keash/ckiif/ikevinthido.png)
DLK-194
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
BUZZER REMINDER OPERATION DOES NOT WORK WHEN OPERATING WITH
DOOR REQUEST SWITCH
BUZZER REMINDER OPERATION DOES NOT WORK WHEN OPERATING
WITH DOOR REQUEST SWITCH
Description
INFOID:0000000001686134
NOTE:
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• “LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-III.
• “ANSWER BACK WITH I-KEY LOCK”, “ANSWER BACK WITH I-KEY UNLOCK” and “ANSWER BACK
FUNCTION” are ON when setting on CONSULT-III.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000001686135
1.
CHECK SETTING OF BUZZER REMINDER WITH CONSULT-III
Check “ANSWER BACK WITH I-KEY LOCK” and “ANSWER BACK WITH I-KEY UNLOCK” setting in “WORK
SUPPORT”.
Refer to
DLK-52, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “ANSWER BACK WITH I-KEY LOCK” and “ANSWER BACK WITH I-KEY UNLOCK” setting in
“WORK SUPPORT”. Refer to
DLK-52, "INTELLIGENT KEY : CONSULT-III Function (BCM -
.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
![](/vehicles/zatt/keash/ckiif/juinove.png)
HAZARD REMINDER OPERATION DOES NOT WORK WHEN OPERATING WITH
DOOR REQUEST SWITCH
DLK-195
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
HAZARD REMINDER OPERATION DOES NOT WORK WHEN OPERATING
WITH DOOR REQUEST SWITCH
Description
INFOID:0000000001686136
NOTE:
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
.
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• “HAZARD ANSWER BACK” is ON when setting on CONSULT-III.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000001686137
1.
CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”
Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to
DLK-52, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”. Refer to
KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
2.
CHECK HAZARD FUNCTION
Check hazard function.
Refer to
DLK-108, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
![](/vehicles/zatt/keash/ckiif/ersvereer.png)
DLK-196
< SYMPTOM DIAGNOSIS >
[INTELLIGENT KEY SYSTEM]
HORN REMINDER OPERATION DOES NOT WORK WHEN OPERATING WITH
INTELLIGENT KEY
HORN REMINDER OPERATION DOES NOT WORK WHEN OPERATING
WITH INTELLIGENT KEY
Description
INFOID:0000000001696950
NOTE:
• Before performing the diagnosis in the following table, check “Work Flow”. Refer to
• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and
check each symptom.
CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
• “LOCK/UNLOCK BY I-KEY” is ON when setting on CONSULT-III.
• “ANSWER BACK WITH I-KEY LOCK”, “ANSWER BACK WITH I-KEY UNLOCK” and “HORN WITH KEY-
LESS LOCK” are ON when setting on CONSULT-III.
• Door lock function is normal.
Diagnosis Procedure
INFOID:0000000001696951
1.
CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”
Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”.
Refer to
DLK-52, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”. Refer to
GENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"
2.
CHECK HORN FUNCTION
Check horn function.
Refer to
DLK-106, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-38, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст