Infiniti Q45 (FY33). Manual — part 109
MBT100A
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
HA
EL
IDX
INSTRUMENT PANEL
BT-25
Side and Floor Trim
CAUTION:
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
REMOVAL — Body side trim
q
1
Remove front and rear seats. Refer to “SEAT” for details, BT-42.
q
2
Remove front and rear seat belts. Refer to “SEAT BELTS” in RS section for details.
q
3
Remove front and rear kicking plates.
q
4
Remove dash side lower finishers.
q
5
Remove front and rear body side welts.
q
6
Remove front pillar garnishes.
q
7
Remove center pillar lower garnishes.
q
8
Remove center pillar upper garnishes.
q
9
Remove rear pillar garnishes.
q
10
Remove high-mounted stop lamp cover and high-mounted stop lamp.
q
11
Remove rear parcel shelf.
SBT667
INTERIOR TRIM
BT-26
SBT668-A
GI
MA
EM
LC
EC
FE
AT
PD
FA
RA
BR
ST
RS
HA
EL
IDX
INTERIOR TRIM
Side and Floor Trim (Cont’d)
BT-27
Door Trim
REMOVAL — Door trim
Front door trim
q
1
Remove inside handle escutcheon, then disconnect auto drive positioner connector.
q
2
Remove door armrest.
q
3
Remove power window switches, then disconnect the connectors.
q
4
Remove door step lamp, then disconnect step lamp connector.
q
5
Remove bolts securing door finisher.
q
6
Pull on door finisher to remove clip from door panel and remove door finisher, then disconnect trunk lid
and fuel lid opener switch connector.
Rear door trim
q
7
Remove inside handle escutcheon.
q
8
Remove door armrest.
q
9
Remove ash tray, then remove screw securing power window switch.
q
10
Remove power window switch, then disconnect power window switch connector.
q
11
Remove door step lamp, then disconnect step lamp connector.
q
12
Remove bolts securing door finisher.
q
13
Pull on door finisher to remove clips from door panel and remove door finisher.
SBT289-A
INTERIOR TRIM
BT-28
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст