Dodge Dakota (ND). Manual — part 1211
2. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs (2) that secure the door sill scuff
plate end of the cowl trim panel to the retaining
clips in the front door sill.
3. Pull the door sill scuff plate end of the cowl trim
panel upward to disengage the retaining tabs that
secure the trim panel (1) to the cowl and remove
the trim panel.
Quad Cab
1. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs that secure the door sill scuff
plate (1) end of the cowl trim panel to the retaining
clips (2) in the front door sill (3).
2. Pull the door sill scuff plate end of the cowl trim
panel upward to disengage the retaining tabs that
secure the trim panel to the cowl and remove the
trim panel.
23 - 256
INTERIOR
ND
INSTALLATION
Club Cab
1. Position the cowl trim panel (1) in the vehicle with
the door sill scuff plate end (2) of the trim panel
angled upward. Seat the upper outer end of the
trim panel underneath the dash panel and engage
the retaining tabs that secure the trim panel to the
cowl.
2. Align the retaining tabs on the door sill scuff plate
end of the trim panel with the retaining clips in the
front door sill and engage the retaining tabs that
secure the trim panel to the door sill.
3. Install the outer front seat belt retractor cover,
(Refer to 23 - BODY/INTERIOR/COVER-OUTER
FRONT
SEAT
BELT
RETRACTOR
-
INSTALLATION).
ND
INTERIOR
23 - 257
Quad Cab
1. Position the cowl trim panel in the vehicle with the
door sill scuff plate end (1) of the trim panel angled
upward. Seat the upper outer end of the trim panel
underneath the dash panel and engage the retain-
ing tabs that secure the trim panel to the cowl.
2. Align the retaining tabs on the door sill scuff plate
end of the trim panel with the retaining clips (2) in
the front door sill (3) and engage the retaining tabs
that secure the trim panel to the door sill.
PLATE-DOOR SCUFF
REMOVAL
Club Cab
1. Remove the outer front seat belt retractor cover,
(Refer to 23 - BODY/INTERIOR/COVER-OUTER
FRONT SEAT BELT RETRACTOR - REMOVAL).
23 - 258
INTERIOR
ND
2. To access the rear door sill scuff plate for removal,
use a trim stick C-4755 or equivalent to disengage
enough of the retaining tabs (2) that secure the
door sill scuff plate end of the cowl trim panel to
the retaining clips in the front door sill.
3. Using a trim stick C-4755 or equivalent, disengage
the retaining tabs (2) that secure the rear door sill
scuff plate (1) to the retaining clips in the rear door
sill and remove the scuff plate.
ND
INTERIOR
23 - 259
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст