Mitsubishi Lancer Evolution IX. Manual — part 135
![](/vehicles/winoney/wruvea/ger/imelorrs.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-103
INSPECTION PROCEDURE D-4: Front and/or rear passenger's power window(s) do not work by
means of the power window main switch.
FRONT
(RH)
REAR
(RH)
LOCK
SWITCH
REAR
(LH)
POWER WINDOW
MAIN SWITCH
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
CPU
CPU
POWER WINDOW
SUB SWITCH
POWER WINDOW
SUB SWITCH
(REAR: RH)
CPU
CPU
Power Window Circuit <LHD>
(FRONT)
(REAR: LH)
POWER WINDOW
SUB SWITCH
![](/vehicles/winoney/wruvea/ger/oant.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-104
COMMENTS ON TROUBLE SYMPTOM
If the passenger's and/or rear power window does
not work by means of the power window main switch,
the power window main switch or the respective
power window sub switch(es) may be defective.
POSSIBLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the front power window sub
switch, rear power window sub switch (RH) or
rear power window sub switch (LH)
• Damaged harness wires and connectors
FRONT
(LH)
REAR
(RH)
LOCK
SWITCH
CPU
REAR
(LH)
POWER WINDOW
MAIN SWITCH
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
CPU
CPU
CPU
POWER WINDOW
SUB SWITCH
POWER WINDOW
SUB SWITCH
POWER WINDOW
SUB SWITCH
(FRONT)
(REAR: LH)
(REAR: RH)
Power Window Circuit <RHD>
![](/vehicles/winoney/wruvea/ger/ues.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-105
DIAGNOSIS PROCEDURE
Step 1. Check the power window main switch.
Check that the driver's power window works by
means of the power window main switch.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to inspection procedure D-2 "Driver's
power window does not work by means of
the power window main switch <LH drive
vehicles>
." Refer to inspection
procedure D-2 "Driver's power window does
not work by means of the power window
main switch <RH drive vehicles>
Step 2. Check the power window sub switch.
Check that each power window works by means of
the respective power window sub switch when the
power window lock switch is turned off.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Refer to inspection procedure D-3 "Relevant
power window(s) do not work by means of
the front and rear passenger's power
window sub switches
Step 3. Determine a trouble spot.
Q: Which power window does not work when the
power window main switch is operated?
Front passenger's door <LH drive vehicles> :
Go
to Step 4.
Front passenger's door <RH drive vehicles> :
Go
to Step 7.
Rear right door :
Go to Step 10.
Rear left door :
Go to Step 13.
Step 4. Connector check: E-05 power window
main switch connector and E-14 front power
window sub switch connector
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the connector.
AC310484
Connector: E-05 <LHD>
AD
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Front door (LH)
AC310488
Connector: E-14 <LHD>
Harness side
AD
Front door (RH)
![](/vehicles/winoney/wruvea/ger/cht.png)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-106
Step 5. Check the wiring harness between E-05
power window main switch connector terminal
No.11 and E-14 front power window sub switch
connector terminal No.6.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connectors C-17, C-110, and repair if neces-
sary.
• Check the communication lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the wiring harness.
Step 6. Retest the system.
After the front power window sub switch is replaced,
check that the front passenger's door power window
can be operated by the power window sub switch.
(1) Replace the front power window sub switch.
(2) Check that the front passenger's power window
works by means of the power window main
switch.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window main switch.
Step 7. Connector check: E-05 power window
main switch connector and E-14 front power
window sub switch connector
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the connector.
AC310484
Connector: E-05 <LHD>
AD
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Front door (LH)
AC310488
Connector: E-14 <LHD>
Harness side
AD
Front door (RH)
AC310446
Connector: C-17 <LHD>
AE
AC310452
Connector: C-110 <LHD>
AC
AC310493
Connector: E-05 <RHD>
AG
Harness side
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Front door (RH)
AC310498
Connector: E-14 <RHD>
Harness side
AC
Front door (LH)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст