Mitsubishi Lancer Evolution IX. Manual — part 217
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-127
Step 4. Connector check: E-05 power window
main switch connector and E-02 front power
window regulator motor (LH) connector
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the defective connector.
Step 5. Check the wiring harness from E-05
power window main switch connector terminal
Nos.8, 9, 10 and 12 to E-02 front power window
regulator motor (RH) connector terminal Nos.5, 2,
3 and 6.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the wiring harness.
Step 6. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap func-
tion works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the front power window regulator
motor assembly (LH).
AC310485
Connectors: E-02, E-05 <LHD>
E-02
E-05
Harness side
Harness side
E-05
E-02 (GR)
AB
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Front door (LH)
AC310485
Connectors: E-02, E-05 <LHD>
E-02
E-05
Harness side
Harness side
E-05
E-02 (GR)
AB
10
1
6
14
5
12
13
4
11
7
2
3
8
9
Front door (LH)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-128
Step 7. Connector check: E-05 power window
main switch connector and E-11 front power
window regulator motor (RH) connector
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
Step 8. Check the wiring harness from E-05
power window main switch connector terminal
Nos.8, 9, 10 and 12 to E-11 front power window
regulator motor (RH) connector terminal Nos.5, 2,
3 and 6.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
Step 9. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap func-
tion works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the front power window regulator
motor assembly (RH).
AC310494
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AC310494
Connectors: E-05, E-11 <RHD>
E-11
E-05
Harness side
Harness side
E-05
E-11 (GR)
AB
Front door (RH)
AC310494
10
1
6
14
5
12
13
4
11
7
2
3
8
9
AC310494
Connectors: E-05, E-11 <RHD>
E-11
E-05
Harness side
Harness side
E-05
E-11 (GR)
AB
Front door (RH)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-129
Step 10. Connector check: E-11 front power
window regulator motor (RH) connector
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
Step 11. Resistance measurement at E-11 front
power window regulator motor (RH) connector
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Resistance between E-11 front power window
regulator motor (RH) connector terminal No.5
and body earth.
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Go to Step 12.
Step 12. Check the wiring harness from E-11
front power window regulator motor (RH)
connector terminal No.5 to body earth.
NOTE:
Prior to the wiring harness inspection, check interme-
diate connector C-110, and repair if necessary.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the wiring harness.
Step 13. Connector check: E-14 front power
window sub switch (RH) connector
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Repair the defective connector.
AC310488
Connector: E-11 <LHD>
Harness side
E-11 (GR)
AE
Front door (RH)
AC310488
Connector: E-11 <LHD>
Harness side
E-11 (GR)
AE
Front door (RH)
AC310506
Connector E-02
(Harness side)
AG
AC310488
Connector: E-11 <LHD>
Harness side
E-11 (GR)
AE
Front door (RH)
AC310452
Connector: C-110 <LHD>
AC
AC310488
Connector: E-14 <LHD>
Harness side
AD
Front door (RH)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-130
Step 14. Check the wiring harness from E-14
front power window sub switch (RH) connector
terminal Nos.2, 8 and 3 to E-11 front power
window regulator motor (RH) connector terminal
Nos.2, 3 and 6.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the wiring harness.
Step 15. Retest the system.
After the front power window sub switch (RH) is
replaced, check that the front passenger's anti-trap
function can be operated by the power window sub
switch.
(1) Replace the front power window sub switch (RH).
(2) Check that the front passenger's power window
anti-trap function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the front power window regulator
motor assembly (RH).
Step 16. Connector check: E-02 front power
window regulator motor (LH) connector
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Repair the defective connector.
Step 17. Resistance measurement at E-02 front
power window regulator motor (LH) connector
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Resistance between E-11 power window
regulator motor (front LH) connector terminal
No.5 and body earth.
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 19.
NO :
Go to Step 18.
AC310489
Connectors: E-11, E-14 <LHD>
E-14
E-11
Harness side
Harness side
E-14
E-11 (GR)
AB
Front door (RH)
AC310498
Connector: E-02 <RHD>
Harness side
E-02 (GR)
AD
Front door (LH)
AC310498
Connector: E-02 <RHD>
Harness side
E-02 (GR)
AD
Front door (LH)
AC310506
Connector E-02
(Harness side)
AG
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст