Mitsubishi Lancer Evolution IX. Manual — part 276
![](/vehicles/winoney/wruvea/ger/ugengharaky.png)
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-41
INSPECTION PROCEDURE 3: Fuel gauge does not work.
AC504369AB
Fuel Gauge Circuit
COMBINATION
METER
CONTROL CIRCUIT
F/GA
R.H. drive vehicles
L.H. drive vehicles
FUEL
GAUGE
UNIT (SUB)
FUEL PUMP
AND GAUGE
UNIT (MAIN)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
TECHNICAL DESCRIPTION (COMMENT)
If only the fuel gauge does not operate, fuel gauge
unit the combination meter, wiring harness or con-
nector(s) may be defective.
![](/vehicles/winoney/wruvea/ger/stulurt.png)
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-42
TROUBLESHOOTING HINTS
• Malfunction of the fuel gauge unit.
• The wiring harness or connectors may have
loose, corroded, or damaged terminals, or termi-
nals pushed back in the connector.
• Malfunction of the combination meter.
DIAGNOSIS PROCEDURE
STEP 1. Check the other meters.
Check to see that the speedometer, fuel gauge
and water thermometer operate normally.
Q: Do all other meters operate?
Yes <other meters all operate> :
Go to Step 2.
NO <one or more of the other meters does not
operate.> :
Refer to
STEP 2. Check fuel gauge unit (sub) connector
D-10 and fuel gauge umit (main) connector D-12
for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
AC310465
AK
D-10
D-10
D-12(GR)
Harness side
D-12
Harness side
Connectors: D-10, D-12
Q: Are fuel gauge unit (sub) connector D-10 and fuel
gauge unit (main) connector D-12 in good
condition?
YES :
Go to Step 3.
NO :
Repair or replace the damage
component(s). The fuel gauge should work
normally.
STEP 3. Check the fuel gauge unit (sub) and fuel
gauge unit (main).
Check to see that the fuel gauge unit (sub) and
fuel gauge unit (main) are normal. Refer to
.
Q: Are fuel gauge unit (sub) and fuel gauge unit
(main) normal?
Yes :
Go to Step 4.
NO :
Replace fuel gauge unit (sub) and fuel
gauge unit (main). The fuel gauge should
work normally.
STEP 4. Check the earth circuit to the fuel gauge
unit (main). Resistance measurement at fuel
gauge unit (main) connector D-12.
AC310465
AL
D-12(GR)
Harness side
Connector: D-12
(1) Disconnect fuel gauge unit (main) connector
D-12 and measure the resistance available at the
wiring harness side of the connector.
2
3
5
1
4
AC211567
Connector D-12
(Harness side)
AC
(2) Measure the resistance value between terminal 1
and earth.
OK: 2 ohms or less
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Go to Step 5.
![](/vehicles/winoney/wruvea/ger/ifarory.png)
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-43
STEP 5. Check the wiring harness between fuel
gauge unit (main) connector D-12 (terminal 1)
and earth.
AC310465
AL
D-12(GR)
Harness side
Connector: D-12
NOTE:
AC310463
AH
Harness side
Connector: D-34
Also check intermediate connector D-34 for loose,
corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector D-34
is damaged, repair or replace the connector.
Q: Is the wiring harness between fuel gauge unit
(main) connector D-12 (terminal 1) and earth in
good condition?
YES :
There is no action to be taken.
NO :
Repair the wiring harness. The fuel gauge
should work normally.
STEP 6. Check combination meter connector
C-02 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.
AC310446
Connector : C-02
<L.H. drive vehicles>
Harness side
BG
C-02(L)
AC310456
Connector : C-02
<R.H. drive vehicles>
Harness side
AV
C-02(L)
Q: Is combination meter connector C-02 in good
condition?
YES :
Go to Step 7.
NO :
Repair or replace the damaged
component(s). The fuel gauge should work
normally.
![](/vehicles/winoney/wruvea/ger/lasteve.png)
COMBINATION METER ASSEMBLY
CHASSIS ELECTRICAL
54A-44
STEP 7. Check the wiring harness between fuel
gauge unit (sub) connector D-10 (terminal 1) and
combination meter connector C-02 (terminal 51).
AC310465
AM
Harness side
Connector: D-10
AC310446
Connector : C-02
<L.H. drive vehicles>
Harness side
BG
C-02(L)
AC310456
Connector : C-02
<R.H. drive vehicles>
Harness side
AV
C-02(L)
NOTE:
AC310452
CONNECTOR: C-113
<L.H. drive vehicles>
AZ
AC310457
AC310457
Connectors: C-23, C-112
<R.H. drive vehicles>
C-112(GR)
C-23(B)
C-23
C-112
AH
AC310463
AH
Harness side
Connector: D-34
Also check intermediate connectors C-112 <RH drive
vehicles>, C-113 <LH drive vehicles>, D-34 and joint
connector C-23 <RH drive vehicles> for loose, cor-
roded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector
C-112 <RH drive vehicles>, C-113 <LH drive vehi-
cles> or D-34 and joint connector C-23 <RH drive
vehicles> is damaged, repair or replace the connec-
tor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст