Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 469
![](/vehicles/winoney/isene/butrele/chte.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-168
STEP 8. Check harness for damage between Park/Neutral
position switch connector B-41 terminal 7 and PCM
connector C-63 terminal 108. <Vehicles with sport mode>
Q: Is the harness wire in good condition?
YES : Go to Step 9.
NO : Repair it.
STEP 9. Check connectors C-27 at intermediate connector
and C-43 at combination meter for damage. <Vehicles with
sport mode>
Q: Are the connectors in good condition?
YES : Go to Step 10.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
AC001844
CONNECTOR: B-41
DIPSTICK
AB
AC001657
CONNECTOR: C-63
PCM
AO
AC001741
CONNECTOR: C-27
AK
AC001729 AO
CONNECTOR: C-43
![](/vehicles/winoney/isene/butrele/ffithe.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-169
STEP 10. Check harness for damage between Park/Neutral
position switch connector B-41 terminal 7 and
combination meter connector C-43 terminal 10. <Vehicles
with sport mode>
Q: Is the harness wire in good condition?
YES : Repair it because of the connector and the harness
damage between output signal of Park/Neutral
position switch connector B-41 terminal 7.
NO : Repair it.
AC001844
CONNECTOR: B-41
DIPSTICK
AB
AC001729 AO
CONNECTOR: C-43
![](/vehicles/winoney/isene/butrele/uriempl.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-170
STEP 11. Check the switch output voltage at PCM
connector C-61 <2.4L Engine> or C-63 <3.0L Engine> by
backprobing.
Measure the voltage between terminal 121 and ground by
backprobing.
•
When selector lever position is "P," voltage should be 0.5
volt or less.
•
When selector lever position is "R," voltage should be 0.5
volt or less.
•
When selector lever position is "N," voltage should be
battery positive voltage.
•
When selector lever position is "D," voltage should be 0.5
volt or less.
•
When selector lever position is "3," voltage should be 0.5
volt or less. <Vehicles without sport mode>
•
When selector lever position is "2," voltage should be 0.5
volt or less. <Vehicles without sport mode>
•
When selector lever position is "L," voltage should be 0.5
volt or less. <Vehicles without sport mode>
•
When selector lever position is sport mode, voltage should
be 0.5 volt or less. <Vehicles with sport mode>
Q: Is the voltage normal?
YES : Go to Step 14.
NO : Turn the ignition switch to "LOCK" (OFF) position. Go
to Step 12. <Vehicles with sport mode> Repair it
because of the harness damage between the Park/
Neutral position switch connector B-41 terminal 4 and
PCM connector C-61 <2.4L Engine> or C-63 <3.0L
Engine> terminal 121. <Vehicles without sport mode>
AC001905
C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
CONNECTOR HARNESS
SIDE VIEW
AD
![](/vehicles/winoney/isene/butrele/int.png)
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-171
STEP 12. Check harness for damage between Park/Neutral
position switch connector B-41 terminal 4 and PCM
connector C-43 terminal 121. <Vehicles with sport mode>
Q: Is the harness wire in good condition?
YES : Go to Step 13.
NO : Repair it.
STEP 13. Check connectors C-27 at intermediate
connector C-43 at combination meter for damage.
<Vehicles with sport mode>
Q: Are the connectors in good condition?
YES : Repair it because of the harness damage between
the Park/Neutral Position Switch connector B-41
terminal 4 and combination meter connector C-43
terminal 9.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
AC001844
CONNECTOR: B-41
DIPSTICK
AB
AC001729 AO
CONNECTOR: C-43
AC001741
CONNECTOR: C-27
AK
AC001729 AO
CONNECTOR: C-43
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст