Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 701
CONDENSER AND CONDENSER FAN MOTOR
TSB Revision
HEATING AND AIR CONDITIONING
55-41
REMOVAL SERVICE POINT
<<A>> LIQUID PIPE A/DISCHARGE HOSE
DISCONNECTION
CAUTION
Seal the hoses completely, otherwise the compressor oil
and receiver will absorb water vapor easily, possibly
damaging the compressor and deteriorating performance.
Plug the disconnected pipe, hose and condenser nipple to
prevent foreign material from getting into them.
INSTALLATION SERVICE POINT
>>A<< CONDENSER INSTALLATION
When replacing the condenser, refill it with a specified amount
of compressor oil and install it. (to the vehicle).
••••
Compressor oil: SUN PAG 56
••••
Quantity: 15 cm
3
(0.5 floz)
INSPECTION
M1552006800068
CONDENSER FAN MOTOR CHECK
Check to be sure that the condenser fan motor operates when
battery voltage is applied to terminal 2 and terminal 1
grounded.
AC001417AB
REFRIGERANT LINE
TSB Revision
HEATING AND AIR CONDITIONING
55-42
R EFR IG ER A N T LIN E
M1552006400071
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
•
Refrigerant Discharging and Charging (Refer to
REMOVAL SERVICE POINT
<<A>> HOSE/PIPE DISCONNECTION
CAUTION
Seal the hoses completely, otherwise the compressor oil
and receiver will absorb water vapor easily, possibly
damaging the compressor and deteriorating performance.
Plug the disconnected hose, the condenser, the evaporator and
the compressor nipple to prevent foreign material from getting
into them.
AC001418
1
2
3
4
5
6
6
6
6
6
7
4.9 ± 1.0 N·m
44 ± 8 in-lb
4.9 ± 1.0 N·m
44 ± 8 in-lb
25 ± 4 N·m
18 ± 4 in-lb
4.9 ± 1.0 N·m
44 ± 8 in-lb
13 ± 2 N·m
109 ± 21 in-lb
N
N
N
N
PIPNG CONNECTION
6
6
COMPRESSOR OIL:
SUN PAG 56
AB
REMOVAL STEPS
1.
CLAMP
<<A>>
>>A<<
2.
SUCTION HOSE
<<A>>
3.
DISCHARGE HOSE
<<A>>
4.
LIQUID PIPE A
<<A>>
5.
A/C PIPE
6.
O-RING
7.
DUAL PRESSURE SWITCH
REMOVAL STEPS (Continued)
REFRIGERANT LINE
TSB Revision
HEATING AND AIR CONDITIONING
55-43
INSTALLATION SERVICE POINT
>>A<< SUCTION HOSE INSTALLATION
When replacing the suction hose, refill them with a specified
amount of compressor oil, and then install them.
Compressor oil: SUN PAG 56
Quantity:
••••
Suction hose: 10 cm
3
(0.3 floz)
VENTILATORS
TSB Revision
HEATING AND AIR CONDITIONING
55-44
VEN TILATO R S
M1553001600073
REMOVAL AND INSTALLATION
AC001419
1
2
3
3, 4
4
CLIP
A
A
A
A
A
A
SECTION A - A
AB
AC003602
5
DISTRIBUTION DUCT AND
DEFROSTER NOZZLE
ASSEMBLY REMOVAL STEPS
•
INSTRUMENT PANEL
ASSEMBLY (REFER TO GROUP
52A, INSTRUMENT PANEL
.)
1.
DISTRIBUTION DUCT
2.
DEFROSTER NOZZLE
ASSEMBLY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст