Honda Accord Hybrid (2022 year). Manual in english — page 7
110
uu
Indicators
u
In
strum
ent Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Lane Keeping
Assist System
(LKAS) Indicator
(Amber)
•
Comes on if there is a problem with
the LKAS.
•
Stays on constantly
- Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
(LKAS) Indicator
(White/Green)
•
Lights up in white when you press
the LKAS button.
•
Lights up in green when the LKAS is
in operation.
2
Lane Keeping Assist System (LKAS)
P. 480
—
111
uu
Indicators
u
Continued
In
strum
ent Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety Support
Indicator
(Amber)
•
Comes on if there is a problem with
RDM, Low Speed Braking Control
*
,
CMBS
TM
, or blind spot information
system
*
.
•
Stays on constantly
- Have your vehicle
checked by a dealer.
•
Comes on if the RDM, Low Speed
Braking Control
*
, and CMBS
TM
are
deactivated temporarily after the
12-volt battery has been
disconnected and then re-
connected.
•
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
112
uu
Indicators
u
In
strum
ent Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety Support
Indicator
(Amber)
•
Comes on when RDM, Low Speed
Braking Control
*
, and/or CMBS
TM
shuts itself off.
•
Indicator may come on temporarily when
passing through an enclosed space, such
as tunnel.
•
The area around the radar sensor cover is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth. Indicator may take
some time to go off after the radar sensor
cover is cleaned.
•
Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor cover.
2
•
Stays on
- The temperature inside the
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the
temperature inside the camera cools
down.
2
* Not available on all models
113
uu
Indicators
u
Continued
In
strum
ent Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety Support
Indicator
(Amber)
•
Comes on when RDM, Low Speed
Braking Control
*
, and/or CMBS
TM
shuts itself off.
•
Stays on
- The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
•
Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2
P. 499
•
Comes on when mud, snow, or ice
accumulates in the vicinity of sonar.
•
Remove the obstacle in the vicinity of the
sonar sensor.
2
P. 459
2
•
Comes on when mud, snow, or ice
has accumulated in the vicinity of
the blind spot information system
sensor.
•
Comes on while driving
- Something
may be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information
system sensor and remove any obstacles.
2
P. 443
•
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
•
Make sure the total load is within the
Maximum Load Limit.
2
—
Models with Low Speed Braking Control
Models with blind spot information
system
* Not available on all models
114
uu
Indicators
u
In
strum
ent Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Safety Support
Indicator
(Green/Gray)
•
Lights up in green when RDM, Low
Speed Braking Control
*
, CMBS
TM
,
and blind spot information system
*
are on.
•
Lights up in green and gray when
RDM, Low Speed Braking Control
*
,
CMBS
TM
, or blind spot information
system
*
or any two of these systems
are off.
•
Lights up in gray when RDM, Low
Speed Braking Control
*
, CMBS
TM
,
and blind spot information system
*
are off.
2
P. 491
2
P. 453
2
Blind spot information system on
and off
P. 445
2
P. 461
* Not available on all models
115
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the
(home) button, select
Warnings
, then press the left
selector wheel to see the message again with the system message indicator on.
Message
Condition
Explanation
•
Appears when the vehicle is no longer able to run
due to a malfunction.
•
Immediately stop in a safe place.
•
Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.
•
While the vehicle is stopped, apply the parking brake.
2
•
Have your vehicle checked by a dealer.
•
Appears when you set the power mode to ON again
and the vehicle is able to run.
2
116
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if any door or the trunk is not completely
closed.
•
Appears if any door or the trunk is opened while
driving. The beeper sounds.
•
Disappears when all doors and the trunk are closed.
117
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when the engine oil pressure is low.
•
Appears while driving
- Immediately stop in a safe
place.
2
If the Low Oil Pressure Warning Appears
•
Appears if there is a problem with the shutter grille,
and the radiator coolant temperature is too high.
•
Power output will be reduced, so you may not be able
to accelerate or maintain your current speed. Have your
vehicle checked by a dealer.
•
Appears when the washer fluid is low.
•
Refill the washer fluid.
2
P. 552
•
Appears when the scheduled maintenance is due
soon.
•
Consequently,
Maintenance Due Now
and
Maintenance Past Due
follow.
2
Maintenance Minder Messages on the Driver
Information Interface
P. 535
Canadian models
118
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when there is a problem with the 12-volt
battery charging system.
•
Have your vehicle checked by a dealer.
•
Appears when the engine coolant temperature is
near its upper limit.
•
Drive slowly to prevent overheating.
•
Appears when the engine coolant temperature gets
abnormally high.
2
P. 606
119
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if the automatic brake hold is automatically
canceled while it is in operation.
•
Immediately depress the brake pedal.
•
Appears when the automatic brake hold system is
turned off.
2
•
Appears when the automatic brake hold button is
pressed without wearing the driver’s seat belt.
•
Fasten the driver’s seat belt.
2
•
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
•
Press the automatic brake hold button with the brake
pedal depressed.
2
120
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when the parking brake is applied
automatically while it is in operation.
2
P. 508
2
P. 503
•
Appears when the electric parking brake switch is
pressed without depressing the brake pedal while
the electric parking brake is in operation.
•
Press the electric parking brake switch with the brake
pedal depressed.
2
P. 503
•
Appears when you set the power mode to
ACCESSORY or ON.
•
Appears after you unlock and open the driver’s
door.
2
Canadian models
121
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when the power mode is in ACCESSORY.
—
•
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
•
Change the power mode to VEHICLE OFF.
2
•
Appears when you close the door with the power
mode in ON without the keyless remote inside the
vehicle.
•
Disappears when you bring the keyless remote back
inside the vehicle and close the door.
2
P. 199
•
Appears when the keyless remote battery becomes
weak.
2
122
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if the keyless remote’s battery is too weak
to turn on the power system or the key is not within
operating range to turn on the power system.
The beeper sounds six times.
•
Bring the back of the keyless remote into contact with
the
POWER
button.
2
If the Keyless Remote Battery is Weak
•
Appears as soon as a problem is detected in the
keyless access system (smart entry system) or push
button starting system.
•
Appears constantly
- Have your vehicle checked by a
dealer.
•
Appears if you press the
POWER
button while the
vehicle is moving.
2
P. 603
123
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears if the vehicle is being driven in a manner
consistent with drowsy or inattentive driving.
2
•
Appears when you set the power mode to VEHICLE
OFF, if the rear doors were opened shortly before or
after the vehicle was powered on.
•
Check the rear seat for passengers or items before
exiting the vehicle.
2
P. 223
124
uu
Indicators
u
Driver Information Interface Warning and Information Messages
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you set the power mode to OFF while
driving.
•
Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
•
Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
•
When the vehicle is idling or when you are parking or
exiting the vehicle, put the transmission into
(
P
before
releasing the brake pedal.
2
P. 425
•
Appears when you put the transmission into
(
N
,
then release the
(
N
button.
2
If you want to keep the transmission in
(
N
position [car wash mode]
P. 427
125
uu
Indicators
u
Driver Information Interface Warning and Information Messages
Continued
In
strum
ent Pa
nel
Message
Condition
Explanation
•
Appears when you try to change the transmission
without releasing your foot off the accelerator pedal.
•
Release your foot off the accelerator pedal, then
change the transmission.
•
Appears when the
(
P
button is pressed while the
vehicle is moving.
•
Appears if you put the transmission into
(
R
while
the vehicle is moving forward, or into
(
D
while the
vehicle is reversing.
•
Make sure that the vehicle comes to a stop before
operating the shift button.
•
Appears when you set the power mode to ON
without fastening the driver’s seat belt.
•
Appears when you change the shift position after
(
P
has been automatically selected with the driver’s
door open, the driver’s seat belt unfastened, then
the brake pedal is released.
•
Fasten the seat belt properly before you start to drive.
2
•
Appears when you try to change the transmission
without depressing the brake pedal.
•
Depress the brake pedal, then change the transmission.
(White)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст