DAF 95XF. Manual — part 858
1
ACCESSORIES
Contents
2
8
ᓻ 0209
![](/vehicles/unay/milerdeju/uss/bald.png)
1
Safety instructions
ACCESSORIES
1-1
1. SAFETY INSTRUCTIONS
General
The cab is equipped with a hydraulic tilting
mechanism. The pump is located on co-driver’s
side at the rear of the cab. The cab locks are
opened hydraulically during pumping.
Before tilting the cab, make sure that the doors
are closed, that there are no loose items in the
cab and that the gear lever is in neutral. Tilt the
cab fully forward if work must be carried out
underneath the cab.
You can stop the cab tilting forward
at any time by turning the tap to the
reverse tilting position.
8
ᓻ 0209
1
ACCESSORIES
Safety instructions
1-2
8
ᓻ 0209
![](/vehicles/unay/milerdeju/uss/xai.png)
1
Inspection and adjustment
ACCESSORIES
2-1
2. INSPECTION AND ADJUSTMENT
2.1 ADJUSTING ROOF SPOILER
Note:
Correct adjustment of the roof spoiler is
essential to minimise fuel consumption.
1.
Place the vehicle on a level and horizontal
surface. Make sure that in the case of a
tractor/semi-trailer combination the trailer is
straight in front of the semi-trailer.
2.
Determine the centreline of the vehicle and
put a slat on the superstructure roof
protruding into the cab direction.
3.
Put another slat (as a tangent) onto the
outer roof spoiler edge (P) pointing into the
direction of the superstructure.
4.
Both slats should cross at half the distance
(
1
/
2
X) between the roof spoiler edge and
the start of the superstructure.
The roof spoiler height can be adjusted
using adjusting mechanism (B). For the roof
spoiler adjusting range see “Technical
data”.
X
1
/
2
X
P
K1 01 357
P
X
1
/
2
X
P
B
K1 01 356
P
B
K1 01 355
8
ᓻ 0209
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст