Acura RL (1996-2004 year). Manual — part 706
![](/vehicles/shign/ecital/fofa/ren.png)
(B)
Check for a short to ground between the left engine com-
partment wire harness and the dashboard wire harness:
1. Connect the driver's seat belt buckle switch.
2. Disconnect the dashboard wire harness 16P connector
from the left side wire harness (see page
).
3. Erase the DTC memory (see page
).
).
Check for a short to ground in the low line:
1. Disconnect the driver's tension reducer solenoid connec-
tor.
2. Disconnect the airbag connectors (see page
).
3. Disconnect the SRS main harness 18P connector from the
).
4. Check resistance between the No. 10 terminal of the SRS
main harness 18P connector and body ground.
There should be 1 or more.
Check the fuse:
Check the No. 13 (7.5 A) fuse in the under-dash fuse/relay
box (see page
).
Short to ground in the dashboard wire harness; refer to
and continue troubleshooting.
(F)
(G)
Short to ground in the No. 13 (7.5 A) fuse related circuit; refer
to
and continue troubleshooting.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/kecayonowaba.png)
Troubleshooting - '99 - 01 Models
DTC 9-3 (cont'd)
(G)
Check for an open in the driver's seat belt buckle switch:
1. Disconnect the driver's seat belt buckle switch 3P con-
nector (see page
).
2. Check resistance between the No. 1 and No. 3 terminals
of the driver's seat belt buckle switch 3P connector.
There should be 0 - 1.0
Check for an open in the SRS main harness:
1. Disconnect the SRS main harness 8P connector from the
).
2. Check resistance between the No. 11 terminal of the SRS
main harness 18P connector and No. 8 terminal of the
SRS main harness 8P connector.
There should be 0 - 1.0
Check for an open between the SRS main harness and the
main wire harness:
1. Disconnect the main wire harness 14P connector (see
page
).
2. Check resistance between the No. 11 terminal of the SRS
main harness 18P connector and No. 7 terminal of the
main wire harness 14P connector.
There should be 0- 1.0
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/woulatra.png)
(F)
Check for a short to ground between the SRS main harness
and the main wire harness:
1. Disconnect the left side wire harness 14P connector (see
).
2. Check resistance between the No. 10 terminal of the SRS
main harness connector and body ground.
There should be 1 or more.
Check for a short to ground in the SRS main harness:
1. Disconnect the main wire harness 8P connector from the
).
2. Check resistance between the No. 10 terminal of the SRS
main harness 18P connector and body ground.
There should be 1 or more.
Main Menu
Table of Contents
![](/vehicles/shign/ecital/fofa/malile.png)
DTC 9-3 (cont'd)
Troubleshooting - '99 - 01 Models
Check for a short to ground in the hot line:
1. Disconnect the dashboard wire harness 16P connector
from the left side wire harness 16P connector (see page
).
2. Disconnect the airbag connectors (see page
).
3. Disconnect the SRS main harness 18P connector from
).
4. Check resistance between the No. 11 terminal of the SRS
main harness 18P connector and body ground.
There should be 1 or more.
Check for a short to ground between the left side wire har-
ness and the SRS main harness.
1. Disconnect the driver's seat belt buckle switch 3P con-
).
2. Check resistance between the No. 11 terminal of the SRS
main harness 18P connector and the body ground.
There should be 1 or more.
(M)
(K)
Main Menu
Table of Contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст