Mazda Transaxle FN4A-EL. Manual — part 11
K1–36
AUTOMATIC TRANSAXLE
8. Install a new funnel and bearing race.
9. Install the bearing race as shown in the figure.
10. Install the bearing race to the transaxle case.
11. Install the locknut.
(1) Set the primary gear.
A6E5714A068
A6E5714A069
A6E5714A070
A6E5714A071
A6E5714A072
AUTOMATIC TRANSAXLE
K1–37
K1
(2) Set the distance piece and bearing.
(3) Loosely tighten the locknut.
(4) Set the SSTs in the order shown.
(5) Tighten the locknut from the end cover side to
adjust the preload within the specificaion.
Preload
0.50—0.90 N·m
{5.10—9.17 kgf·cm, 4.42—7.96 in·lbf}
A6E5714A073
A6E5714A074
A6E5714A023
A6E5714A024
A6E5714A075
K1–38
AUTOMATIC TRANSAXLE
(6) Stake the locknut.
(7) Remove the SST
12. Install the front internal gear and one-way clutch.
13. Apply petroleum jelly to the bearing, and secure it
to the front planerary gear component.
14. Install the front planetary gear component.
15. Apply petroleum jelly to the bearing, and secure it
to the front sun gear.
16. Install the front sun gear.
17. Install the rear planetary gear.
Note
•
Rotate the engine stand so that the oil pan
faces downward. Pull the front internal gear
and one-way clutch component a little until
the groove for the snap ring appears, then
install the snap ring.
A6E5714A076
X3U517AAZ
A6E5714A021
A6E5714A077
X3U517AAW
AUTOMATIC TRANSAXLE
K1–39
K1
18. Install the snap ring.
19. Rotate the engine stand so that the end cover
faces upward, and verify that the snap ring is
installed accurately.
20. Install the band servo component.
(1) Install the servo return spring and servo
piston.
(2) Apply ATF to the O-ring, and install it to the
transaxle case.
(3) Install the servo retainer.
Tightening torque
10.8—13.7 N·m
{110—140 kgf·cm, 95.5—121 in·lbf}
21. Install the 2-4 brake band.
22. Apply petroleum jelly to the bearing, and secure it
to the clutch component.
23. Install the clutch component.
24. Select the band strut.
(1) Find an appropriate bolt (under head length:
60—70 mm {2.36—2.75 in}), and tighten the
2-4 brake band with the bolt.
Tightening torque
4.9 N·m {50 kgf·cm, 43 in·lbf}
A6E5714A078
X3U517AGF
A6E5714A013
X3U517AGH
X3U517AAU
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст