Mazda CX-7 (2012 year). Instruction — part 20
Black plate (312,1)
Information display
When available, the information display
shows telephone numbers, Bluetooth
®
Hands-Free messages, and operation
status.
Bluetooth phone connected
Microphone
The microphone is used for speaking
voice commands or exchanging
conversation.
Microphone
Audio unit/7-inch Navigation system
The audio unit or 7-inch navigation
system is used for adjusting the volume.
qVoice
To prevent the deterioration in voice
recognition rate and voice quality, the
following points must be observed:
l
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
l
Close the windows and/or the
moonroof to reduce loud noises from
outside the vehicle, or turn down the
airflow of the climate control system
while Bluetooth
®
Hands-Free is being
used. Voice recognition may not
function correctly or voice quality may
deteriorate under the following
conditions.
l
A passenger is speaking.
l
Driving with the window and/or the
moonroof open.
l
Driving on bumpy roads.
l
Noise outside of the vehicle is loud.
(Construction sites, inside tunnels,
excess oncoming traffic, or heavy
rain.)
l
Operation noise from turn signals,
wipers, or the horn is heard.
l
A/C airflow is strong or wind is
blowing on the microphone.
l
There is noise coming from cargo
loaded in the vehicle.
l
Voice commands may not be
recognized depending on the voice. If
the voice commands are not recognized
correctly, repeat the commands in a
louder voice, at a natural pace, as if
speaking to another person.
l
Dialects or different wording other than
hands-free prompts cannot be
recognized by voice recognition. Speak
in the wording specified by the voice
commands.
6-74
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page312
Saturday, September 24 2011 10:33 AM
Black plate (313,1)
NOTE
If the voice recognition performance is not
satisfactory, refer to
“Voice Recognition
Learning Function (Speaker Enrollment)
”
(page 6-99).
Please be aware that the voice recognition
may still make an error despite following
the above points.
qFunction Restrictions While
Using Bluetooth® Hands-Free
Some functions are limited while
Bluetooth
®
Hands-Free is being used.
They include:
l
Beep sound and voice guidance related
to the audio unit and 7-inch navigation
system are not heard.
l
Beep sound related to the A/C
operation is not heard.
l
The 7-inch navigation system's voice
recognition command does not
function.
qHow to Use This Section
Descriptions in the text are as follows:
Say: Voice commands to be spoken by
you.
Prompt: Voice guidance output from the
speaker.
NOTE
Say voice commands after the beep sound
[Beep] is heard.
Example)
Say: [Beep]
“Dial”
Prompt:
“Number, please”
Say: [Beep]
“XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
Bluetooth
®
Hands-Free Activation
Method
Press the pick-up button (with/without 7-
inch navigation system) or talk button
with a short press (without 7-inch
navigation system) or a long press (with
7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
The hands-free system is activated.
Functions of the hands-free telephone,
such as making and receiving calls, can be
used after the activation. (For details on
the telephone functions, refer to
“Basic
Bluetooth
®
Hands-Free Operation
” or
“Convenient Use of the Hands-Free
System
”.)
NOTE
For vehicles with a 7-inch navigation system,
the system operates by speaking the voice
recognition command of the 7-inch navigation
system after pressing the talk button with a
short press. For voice recognition details with
the 7-inch navigation system, refer to the
separate
“NAVIGATION SYSTEM Owner's
Manual
”.
Tutorial
The tutorial explains how to use
Bluetooth
®
Hands-Free.
To activate the tutorial, do the following:
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
Interior Comfort
Bluetooth® Hands-Free
6-75
CX-7_8CG3-EA-11J_Edition1 Page313
Saturday, September 24 2011 10:33 AM
Black plate (314,1)
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Tutorial”
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
qUseful Commands at Anytime,
Convenient Operations
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Press the talk button with a short press.
2. Say: [Beep]
“Help”
3. Follow the prompts to receive the
appropriate voice guidance
instructions.
Cancel
The Bluetooth
®
Hands-Free system
transitions to standby status if the
following operation is performed while
the system is activating.
Press the hang-up button, or the talk
button with a long press.
Returning to previous operation
(Without 7-inch navigation system)
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep]
“Go Back”
Voice guidance interrupt operation
Voice guidance can be skipped by
pressing the talk button with a short press
while it is being heard. A new voice input
command can then be spoken by the user.
Voice recognition mode cancel
If you want to cancel the voice
recognition mode during a call, the voice
recognition mode can be canceled without
having to end the call.
Press the talk button with a long press.
6-76
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page314
Saturday, September 24 2011 10:33 AM
Black plate (315,1)
Basic Bluetooth® Hands-
Free Operation
qBluetooth® Hands-Free Preparation
Language setting
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
l
If the language setting is changed, device
registration is maintained.
Phonebook records are not cleared, but
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
l
Do these steps before you start driving.
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
Method 1
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Setup”
3. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
4. Say: [Beep]
“Language”
5. Prompt:
“Select a language: English,
French, or Spanish.
”
6. Say: [Beep]
“French” (Speak the
desired language:
“English”, “French”
or
“Spanish”)
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
7. Prompt:
“French (Desired language)
selected. Is this correct?
”
8. Say: [Beep]
“Yes”
9. (Without 7-inch navigation system)
Prompt:
“Please wait. Switching to
French phonebook. French selected.
”
(Spoken in the newly selected
language).
(With 7-inch navigation system)
Prompt:
“French (Desired language)
selected, returning to main menu
”
(Spoken in the newly selected
language).
Method 2
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
Interior Comfort
Bluetooth® Hands-Free
6-77
CX-7_8CG3-EA-11J_Edition1 Page315
Saturday, September 24 2011 10:33 AM
Black plate (316,1)
2. Say: [Beep]
“French” (Say the desired
language:
“English”, “French”, or
“Spanish”.) (Change the desired
language by saying the language
name.)
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
3. Prompt:
“Would you like to change
the language to French (Desired
language)?
”
4. Say: [Beep]
“Yes”
5. (Without 7-inch navigation system)
Prompt:
“Please wait. Switching to
French phonebook. French selected.
”
(Spoken in the newly selected
language).
(With 7-inch navigation system)
Prompt:
“Please wait. Switching to
French phonebook. French selected,
returning to main menu
” (Spoken in
the newly selected language).
Pairing code setting (Without 7-inch
navigation system)
The 4-digit pairing code setting for
registration of your cell phone (pairing)
can be set beforehand.
NOTE
The initial setting value is
“0000”.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“Setup”
3. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
4. Say: [Beep]
“Pairing options”
5. Prompt:
“Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
”
6. Say: [Beep]
“Set pairing code”
7. Prompt:
“Your current pairing code is
XXXX. Do you want to change it to a
different pairing code?
”
8. Say: [Beep]
“Yes”
9. Prompt:
“Please say a 4-digit pairing
code.
”
10. Say: [Beep]
“YYYY”
11. Prompt:
“YYYY is this correct?”
12. Say: [Beep]
“Yes” or “No”
13. If
“Yes”, go to Step 14. If “No”, the
procedure returns to Step 9.
14. Prompt:
“Your new pairing code is
YYYY. Use this pairing code when
pairing devices to the Hands free
system. Do you want to pair a device
now?
”
15. Say: [Beep]
“Yes” or “No”
16. If
“Yes”, the system switches to the
device registration mode. If
“No”, the
system returns to standby status.
Device programming (Pairing)
To use Bluetooth
®
Hands-Free, the device
equipped with Bluetooth
®
has to be
programmed to the hands-free unit using
the following procedure.
A maximum of seven devices including
hands-free mobile phones and Bluetooth
®
audio devices can be programmed to one
vehicle.
6-78
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page316
Saturday, September 24 2011 10:33 AM
Black plate (317,1)
NOTE
l
A device can be programmed only when the
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
l
If a Bluetooth
®
device has already been
programmed to the vehicle as a Bluetooth
®
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth
®
audio device if it has already
been programmed as a hands-free mobile
phone.
l
Since the communication range of a
Bluetooth
®
equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
(Without 7-inch navigation system)
1. Activate the Bluetooth
®
application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep]
“Setup”
4. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
5. Say: [Beep]
“Pairing options”
6. Prompt:
“Available options are: Pair,
Edit, Delete, List, or Set Pairing Code.
”
7. Say: [Beep]
“Pair”
8. Prompt:
“Start the pairing process on
your Bluetooth
®
device. Your pairing
code is 0000 (XXXX). Input this code
on your Bluetooth
®
device when
prompted on the device. See device
manual for instructions.
”
9. Using the device, perform a search for
the Bluetooth
®
device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select
“Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt:
“Please say the name of the
device after the beep.
”
13. Say: [Beep]
“XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.)
Example:
“Stan's device.”
NOTE
Speak a programmed
“device tag” within 10
seconds.
If more than two devices are to be
programmed, they cannot be programmed with
the same or similar
“device tag”.
14. Prompt:
“XXXXXX - - - (Ex.
“Stan's device”) (Device tag). Is this
correct?
”
15. Say: [Beep]
“Yes”
16. Prompt:
“Pairing complete”
(With 7-inch navigation system)
1. Activate the Bluetooth
®
application of
the device.
Interior Comfort
Bluetooth® Hands-Free
6-79
CX-7_8CG3-EA-11J_Edition1 Page317
Saturday, September 24 2011 10:33 AM
Black plate (318,1)
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a long press.
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
3. Say: [Beep]
“Setup”
4. Prompt:
“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
”
5. Say: [Beep]
“Pairing options”
6. Prompt:
“Select one of the following:
Pair, edit, delete, or list.
”
7. Say: [Beep]
“Pair”
8. Prompt:
“Please say a 4-digit pairing
code.
”
9. Say: [Beep]
“XXXX” (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
l
Some devices accept only a particular
pairing code (Usually,
“0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
l
Record the code as it will be used to
program your device in Step 16.
10. Prompt:
“Pairing code XXXX (4-
digit number). Is this correct?
”
11. Say: [Beep]
“Yes” or “No”
12. If
“Yes”, go to Step 13.
If
“No”, the procedure returns to Step
8.
13. Prompt:
“Start pairing procedure on
the device. See the device manual for
instructions.
”
14. Using the device, perform a search
for the Bluetooth
®
device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select
“Mazda” from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt:
“Please say the name of the
device after the beep.
”
18. Say: [Beep]
“XXXX - - -” (Speak a
“device tag”, an arbitrary name for
the device.) Example:
“Stan's device.”
NOTE
Speak a programmed
“device tag” within 10
seconds. If more than two devices are to be
programmed, they cannot be programmed with
the same or similar
“device tag”.
19. Prompt:
“Adding XXXXXX - - -
(Ex.
“Stan's device”) (Device tag). Is
this correct?
”
20. Say: [Beep]
“Yes”
21. Prompt:
“Pairing complete”
6-80
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page318
Saturday, September 24 2011 10:33 AM
Black plate (319,1)
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth
®
Hands-Free again,
or by activating Bluetooth
®
Hands-Free
first after switching the ignition from OFF
to ACC, the system reads out a voice
guidance,
“XXXXXX - - - (Ex. “Stan's
device
”) (Device tag) is connected”.
NOTE
l
Device registration can also be done by
operating the audio unit or panel buttons
on the navigation unit.
l
(Without 7-inch navigation system)
Refer to Bluetooth® Audio Preparation
on page 6-63.
l
(With 7-inch navigation system)
Refer to the separate manual
“NAVIGATION SYSTEM Owner's
Manual
”
l
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
qMaking a Call Using a Telephone
Number
NOTE
Practice this while parked until you are
confident you can do it while driving in a non-
taxing road situation. If you are not completely
comfortable, make all calls from a safe
parking position, and move out only when fully
under control and you can devote your eyes
and mind to driving.
(Without 7-inch navigation system)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX
(Telephone number)
”
5. Prompt:
“XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say Go-
Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.
”
6. (Dialing)
Press the pick-up button or say
“Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say,
“XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say,
“Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.
”. Then go back to
Step 3.
7. Prompt:
“Dialing”
(With 7-inch navigation system)
1. Press the pick-up button or talk button
with a long press.
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt:
“Dialing XXXXXXXXXXX
(Ex.
“555-1234”) (Telephone number)
is this correct?
”
6. Say: [Beep]
“Yes” or “No”.
Interior Comfort
Bluetooth® Hands-Free
6-81
CX-7_8CG3-EA-11J_Edition1 Page319
Saturday, September 24 2011 10:33 AM
Black plate (320,1)
7. When
“Yes” is spoken, the procedure
proceeds to Step 8.
When
“No” is spoken, the procedure
returns to Step 3.
8. Prompt:
“Dialing”
NOTE
The
“Dial” command and a telephone number
can be combined.
Ex. In Step 2, say,
“Dial 123-4567”, then,
Steps 3 and 4 can be skipped.
qReceiving an Incoming Call
1. Prompt:
“Incoming call, press the
pickup button to answer
”.
2. To accept the call, press the pick-up
button.
To reject the call, press the hang-up
button.
Pick-up button
Hang-up button
Pick-up button
qHanging Up a Call
Press the hang-up button during the call.
A beep sound will confirm that call is
ended.
qVolume Adjustment
The power/volume dial of the audio unit
or the 7-inch navigation system is used to
adjust the volume. Turn the dial to the
right to increase volume, to the left to
decrease it.
Audio unit
7-inch navigation
system
NOTE
l
The volume can also be adjusted using the
volume button on the steering wheel.
l
The music volume of the audio unit and the
7-inch navigation system cannot be
adjusted while Bluetooth® Hands-Free is
being used.
6-82
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page320
Saturday, September 24 2011 10:33 AM
Black plate (321,1)
Convenient Use of the
Hands-Free System
qPhonebook Usage
Phonebook registration
Phone numbers can be registered to the
Bluetooth
®
Hands-Free phonebook.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
(Without 7-inch navigation system)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
4. Say: [Beep]
“New entry”
5. Prompt:
“Name please.”
6. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say a voice tag for the name
registered.)
7. Prompt:
“Adding XXXXX... (Ex.
“Mary's phone”) (Registered voice
tag). Is this correct?
”
8. Say: [Beep]
“Yes”
9. Prompt:
“Home, Work, Mobile, or
Other?
”
10. Say: [Beep]
“Mobile” (Say “Home”,
“Work”, “Mobile”, or “Other”, for the
desired location to be registered.)
11. Prompt:
“Mobile (Location to be
registered). Is this correct?
”
12. Say: [Beep]
“Yes”
13. Prompt:
“Number, please.”
14. Say: [Beep]
“XXXXXXXXXXX”
(Say the phone number to be
registered.)
15. Prompt:
“XXXXXXXXXXX
(Phone number registration). After the
beep, continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button
to save the number.
”
16. (Registration)
Press the pick-up button or say
“Enter”, then go to Step 17.
(Adding/inputting telephone
number)
Say,
“XXXX” (desired telephone
number), then go to Step 15.
(Telephone number correction)
Say,
“Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.
”. Then go back
to Step 13.
17. Prompt:
“Number saved. Would you
like to add another number for this
entry?
”
18. Say: [Beep]
“Yes” or “No”.
19. If
“Yes”, an additional phone number
registration can be made for the same
entry.
If
“No”, the system returns to standby
status.
(With 7-inch navigation system)
1. Press the pick-up button or talk button
with a long press.
Interior Comfort
Bluetooth® Hands-Free
6-83
CX-7_8CG3-EA-11J_Edition1 Page321
Saturday, September 24 2011 10:33 AM
Black plate (322,1)
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
4. Say: [Beep]
“New entry”
5. Prompt:
“Name please.”
6. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say a voice tag for the name
registered.)
7. Prompt:
“Adding XXXXX... (Ex.
“Mary's phone”) (Registered voice
tag). Is this correct?
”
8. Say: [Beep]
“Yes”
9. Prompt:
“Home, Work, Mobile, or
Other?
”
10. Say: [Beep]
“Mobile” (Say “Home”,
“Work”, “Mobile”, or “Other”, for the
desired location to be registered.)
11. Prompt:
“Mobile (Location to be
registered). Is this correct?
”
12. Say: [Beep]
“Yes”
13. Prompt:
“Number, please.”
14. Say: [Beep]
“XXXXXXXXXXX
(Ex.
“555-1234”)” (Say the phone
number to be registered.)
15. Prompt:
“XXXXXXXXXXX (Ex.
“555-1234”) (Phone number
registration). Is this correct?
”
16. Say: [Beep]
“Yes”
17. Prompt:
“Number saved. Would you
like to add another number for this
entry?
”
18. Say: [Beep]
“Yes” or “No”.
19. If
“Yes”, an additional phone number
registration can be made for the same
entry.
If
“No”, the procedure proceeds to
Step 20.
20. Prompt:
“Returning to main menu.”
Import contact
Phonebook data from your device (Mobile
phone) can be sent and registered to your
Bluetooth
®
Hands-Free phonebook using
Bluetooth
®
.
(Without 7-inch navigation system)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
4. Say: [Beep]
“Import contact”
5. Prompt:
“The hands free System is
ready to receive a contact from a
phone. Only a home, a work, and a
mobile number can be imported. This
process requires operation of a mobile
phone. Refer to the phone's manual for
more information.
”
6. Device (Mobile phone) operation:
Select one entry from the phonebook
and send it using Bluetooth
®
.
7. Prompt:
“X (Number of locations
which include data) numbers have been
imported. What name would you like
to use for these numbers?
”
6-84
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page322
Saturday, September 24 2011 10:33 AM
Black plate (323,1)
8. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say a voice tag for the name
registered.)
9. Prompt:
“Adding XXXXX... (Ex.
“Mary's phone”) (Voice tag). Is this
correct?
”
10. Say: [Beep]
“Yes”
11. Prompt:
“Number saved. Would you
like to import another contact?
”
12. Say: [Beep]
“Yes” or “No”
13. If
“Yes”, the procedure proceeds to
Step 5.
If
“No”, the system returns to standby
status.
(With 7-inch navigation system)
1. Press the pick-up button or talk button
with a long press.
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
4. Say: [Beep]
“Import contact”
5. Prompt:
“Ready to receive a contact
from the phone.
”
6. Device (Mobile phone) operation:
Select one entry from the phonebook
and send it using Bluetooth
®
.
7. Prompt:
“X (Number of locations
which include data) numbers have been
imported. What name would you like
to use for these numbers?
”
8. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say a voice tag for the name
registered.)
9. Prompt:
“Adding XXXXX... (Ex.
“Mary's phone”) (Voice tag). Is this
correct?
”
10. Say: [Beep]
“Yes”
11. Prompt:
“Number saved. Would you
like to import another contact?
”
12. Say: [Beep]
“Yes” or “No”
13. If
“Yes”, the procedure proceeds to
Step 5.
If
“No”, the procedure proceeds to
Step 14.
14. Prompt:
“Returning to main menu.”
Making calls using the phonebook
Telephone calls can be made by saying
the name of a person (voice tag) whose
phone number has been registered in
Bluetooth
®
Hands-Free in advance.
For the phonebook setting method, refer
to (page 6-88).
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Call”
3. Prompt:
“Name please.”
4. Say: [Beep]
“XXXXX... (Ex. “John's
phone
”)” (Say a voice tag registered in
the phonebook.)
Interior Comfort
Bluetooth® Hands-Free
6-85
CX-7_8CG3-EA-11J_Edition1 Page323
Saturday, September 24 2011 10:33 AM
Black plate (324,1)
5. Prompt:
“Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at
home
”). Is this correct?” (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep]
“Yes”
7. Prompt:
“Dialing”
NOTE
The
“Call” command and the voice tag can be
combined.
Ex. In Step 2, say,
“Call John's phone”, then,
Steps 3 and 4 can be skipped.
qRedialing Function
Redialing the number of the person
previously dialed using the phone is
possible.
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Redial”
3. Prompt:
“Dialing”
qEmergency Calls
A call can be made to the emergency
phone number (911: U.S.A/Canada, 066:
Mexico) using the voice input command.
It may not function properly in some areas
in Mexico.
1. Press the pick-up button (with/without
7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Emergency”
3. - USA/Canada vehicles - Prompt:
“Dialing “911”, is this correct?”
- Mexico vehicles - Prompt:
“Dialing
“066”, is this correct?”
4. Say: [Beep]
“Yes”
5. Prompt:
“Dialing”
qRefusing an Incoming Call
For incoming call refusal, refer to
“Receiving an incoming call” (page 6-82).
qMute
The microphone can be muted during a
call.
1. Press the talk button with a short press.
2. Say: [Beep]
“Mute”
3. Prompt:
“Microphone muted”
Canceling mute
1. Press the talk button with a short press.
6-86
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page324
Saturday, September 24 2011 10:33 AM
Black plate (325,1)
2. Say: [Beep]
“Mute off”
3. Prompt:
“Microphone unmuted”
qTransferring a Call
Transferring a call from Hands-Free to
a device (Mobile phone)
Communication between the hands-free
unit and a device (Mobile phone) is
canceled, and the line can be switched to a
standard call using a device (Mobile
phone).
1. Press the talk button with a short press.
2. Say: [Beep]
“Transfer call”
3. Prompt:
“Transferred call to phone”
Transferring a call from a device
(Mobile phone) to Hands-Free
Communication between devices (Mobile
phone) can be switched to Bluetooth
®
Hands-Free.
1. Press the talk button with a short press.
2. Say: [Beep]
“Transfer call”
3. Prompt:
“Transferred call to Hands
Free system
”
qMulti-Call Functions
Call waiting
A call can be interrupted to receive an
incoming call from a third party.
Call interrupt
A call can be switched to a new incoming
call.
Method 1
1. Press the pick-up button.
2. Prompt:
“Swapping calls.”
Method 2
1. Press the talk button with a short press.
2. Say: [Beep]
“Swap calls”
3. Prompt:
“Swapping calls”
NOTE
l
To refuse an incoming call, press the hang-
up button.
l
After receiving a new incoming call, the
previous call is placed on hold.
Switching calls
Switching back to the previous call can
also be done.
Method 1
1. Press the pick-up button.
2. Prompt:
“Swapping calls.”
Method 2
1. Press the talk button with a short press.
2. Say: [Beep]
“Swap calls”
3. Prompt:
“Swapping calls”
Three-way call function
1. Press the talk button with a short press.
2. Say: [Beep]
“Join calls”
3. Prompt:
“Joining calls”
Making a call using a telephone
number
(Without 7-inch navigation system)
1. Press the talk button with a short press.
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX
(Telephone number)
”
Interior Comfort
Bluetooth® Hands-Free
6-87
CX-7_8CG3-EA-11J_Edition1 Page325
Saturday, September 24 2011 10:33 AM
Black plate (326,1)
5. Prompt:
“XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say Go-
Back to re-enter the last entered
numbers, or press the Pick-Up button
to execute dialing.
”
6. (Dialing)
Press the pick-up button or say
“Dial”,
then go to Step 7.
(Adding/inputting telephone
number)
Say,
“XXXX” (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say,
“Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed.
”. Then go back to
Step 3.
7. Prompt:
“Dialing”
(With 7-inch navigation system)
1. Press the talk button with a short press.
2. Say: [Beep]
“Dial”
3. Prompt:
“Number, please”
4. Say: [Beep]
“XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt:
“Dialing XXXXXXXXXXX
(Ex.
“555-1234”) (Telephone number)
is this correct?
”
6. Say: [Beep]
“Yes” or “No”.
7. When
“Yes” is spoken, the procedure
proceeds to Step 8.
When
“No” is spoken, the procedure
returns to Step 3.
8. Prompt:
“Dialing”
Making calls using the phonebook
1. Press the talk button with a short press.
2. Say: [Beep]
“Call”
3. Prompt:
“Name please.”
4. Say: [Beep]
“XXXXX... (Ex. “John's
phone
”)” (Say a voice tag registered in
the phonebook.)
5. Prompt:
“Calling XXXXX... (Ex.
“John's phone”) XXXX (Ex. “at
home
”). Is this correct?” (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep]
“Yes”
7. Prompt:
“Dialing”
Redialing function
1. Press the talk button with a short press.
2. Say: [Beep]
“Redial”
3. Prompt:
“Dialing”
Ending the current call
Press the hang-up button during the call.
qPhonebook Settings
Editing phonebook
The data registered to the Bluetooth
®
Hands-Free phonebook can be edited.
NOTE
Do this function only when parked. It is too
distracting to attempt while driving and you
may make too many errors to be effective.
(Without 7-inch navigation system)
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
6-88
Interior Comfort
Bluetooth® Hands-Free
CX-7_8CG3-EA-11J_Edition1 Page326
Saturday, September 24 2011 10:33 AM
Black plate (327,1)
4. Say: [Beep]
“Edit”
5. Prompt:
“Please say the name of the
entry you would like to edit or say,
“List names”.”
6. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say the voice tag for the
registered name to be edited in the
phonebook.)
7. Prompt:
“Home, Work, Mobile, or
Other?
”
8. Say: [Beep]
“Home” (Say the
registered location to be edited:
“Home”, “Work”, “Mobile”, or
“Other”).
9. Prompt:
“XXXXX... (Ex. “Mary's
phone
”) (Registered voice tag) XXXX
(Ex.
“Home”) (Registered location). Is
this correct?
”
10. Say: [Beep]
“Yes”
11. Prompt:
“The current number is
XXXXXXXXXXX (Ex.
“555-1234”)
(Currently registered number). New
number, please.
”
NOTE
If there was no previous phone number
registered to a location (Ex.
“Work”), the
prompt will only read out
“Number, please”.
12. Say: [Beep]
“XXXXXXXXXXX
(Ex.
“555-5678”)” (Say the new
phone number to be registered.)
13. Prompt:
“XXXXXXXX (Telephone
number) After the beep, continue to
add numbers, or say Go-Back to re-
enter the last entered numbers, or
press the Pick-Up button to save the
number.
”
14. (Number Change)
Press the pick-up button, then go to
Step 15.
(Adding/inputting telephone
number)
Say,
“XXXX” (desired telephone
number), then go to Step 13.
(Telephone number correction)
Say,
“Go Back”. The prompt replies,
“Go Back. The last entered numbers
have been removed. Number, please.
”
. Then go back to Step 12.
15. Prompt:
“Number changed.”
(With 7-inch navigation system)
1. Press the pick-up button or talk button
with a long press.
NOTE
For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]
“Telephone” or
“Phone”.
2. Say: [Beep]
“Phonebook”
3. Prompt:
“Select one of the following:
New entry, edit, list names, delete,
erase all or import contact.
”
4. Say: [Beep]
“Edit”
5. Prompt:
“Please say the name of the
entry you would like to edit or say,
“List names”.”
6. Say: [Beep]
“XXXXX... (Ex. “Mary's
phone
”)” (Say the voice tag for the
registered name to be edited in the
phonebook.)
7. Prompt:
“Home, Work, Mobile, or
Other?
”
Interior Comfort
Bluetooth® Hands-Free
6-89
CX-7_8CG3-EA-11J_Edition1 Page327
Saturday, September 24 2011 10:33 AM
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст