Mazda Training manual — part 223
![](/vehicles/rke/hty/ntwithamb/nint.png)
TC001-18-01H
INTRODUCTION TO M-MDS
15 - Updating IDS
Activity 15- Page 4
Activity 15
(Continued)
7. Verify Internet Service Provider
is selected, then click OK.
8. Click OK.
9. Select Network Options again, then click tick.
![](/vehicles/rke/hty/ntwithamb/trefun.png)
TC001-18-01H
INTRODUCTION TO M-MDS
15 - Updating IDS
Activity 15- Page 5
Activity 15
(Continued)
10. Click
the
Test Network button in the upper right corner.
11. The Test Network screen should look like this; if so, click OK.
NOTE
If any part of this test fails at your dealership, you
will need to contact your dealership’s Information
Technology department.
![](/vehicles/rke/hty/ntwithamb/zanlo.png)
TC001-18-01H
INTRODUCTION TO M-MDS
15 - Updating IDS
Activity 15- Page 6
Activity 15
(Continued)
12. Select
Update Software, and then click tick. Now, select highlight Manual
Calibration Update in the pop-up window, then click tick.
13. Verify Include All New Calibration Files is checked, then click the Update
Calibration / Tech Tips button.
![](/vehicles/rke/hty/ntwithamb/qugotaroch.png)
TC001-18-01H
INTRODUCTION TO M-MDS
15 - Updating IDS
Activity 15- Page 7
Activity 15
(Continued)
14. The Update Calibration screen indicates the progress of data being downloaded
from the network. It may take several minutes to complete this process.
15. The Update Calibration screen looks like this after the network files are copied.
16. Click
OK when you see this updated screen.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст