Lexus LC500C (2022 year). Manual in english — page 4
71
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
*1
: These lights turn on when the engine
switch is turned to ON to indicate that a
system check is being performed. They
will turn off after the engine is on, or
after a few seconds. There may be a
malfunction in a system if a light does
not come on, or turn off. Have the vehi-
cle inspected by your Lexus dealer.
*2
: This light illuminates on the multi-infor-
mation display.
*3
: The light flashes to indicate that the sys-
tem is operating.
*4
: The light comes on when the system is
turned off.
*5
: In order to confirm operation, the BSM
outside rear view mirror indicators illu-
minate in the following situations:
When the engine switch is turned to
ON while the BSM main switch is
turned on.
When the BSM main switch is turned
on while the engine switch is in ON.
If the system is functioning correctly, the
BSM outside rear view mirror indica-
tors will turn off after a few seconds.
If the BSM outside rear view mirror
indicators do not illuminate or do not
turn off, there may be a malfunction in
the system.
If this occurs, have the vehicle inspected
by your Lexus dealer.
*6
: This light illuminates on the outside rear
view mirrors.
*7
: This light illuminates on the center
panel.
*8
: When the outside temperature is
approximately 37°F (3°C) or lower,
the indicator will flash for approximately
10 seconds, then stay on.
■
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will
turn on. When the acceleration exceeds the
Zone of Eco driving, or when the vehicle is
stopped, the light turns off.
Eco Driving Indicator can be enabled on
the multi-information display. (
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with cur-
rent Eco driving ratio based on accelera-
tion.
When the driving mode is Normal mode or
Comfort mode, switch the display to the
side position. (
Eco driving ratio based on acceleration
The part that exceeds the Zone of Eco driv-
ing illuminates in white.
Zone of Eco driving
Eco Driving Indicator will not operate
under the following conditions:
(U.S.A.)
“AIR BAG ON/OFF”
indicator
*7
(
(Canada)
“AIR BAG ON/OFF”
indicator
*7
(
A
B
C
D
72
2-1. Instrument cluster
●
The shift position is in any position other
than D.
●
A paddle shift switch is operated.
●
The driving mode is SPORT S mode or
SPORT S+ mode.
●
The vehicle speed is approximately 80
mph (130 km/h) or higher.
73
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
The units used on the meters may differ depending on the target region.
Engine oil temperature gauge/Eco Driving Indicator
Displays the engine oil temperature or Eco Driving Indicator (
Outside temperature
Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C)
Low outside temperature indicator comes on when the ambient temperature is 37°F
(3°C) or lower
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Shift position/shift range/gear position (
Shift position indicator (
Clock
Time displayed is linked to the analog clock on the instrument panel. (
Engine coolant temperature gauge
Displays the engine coolant temperature
If the engine coolant temperature gauge indicator enters the red zone, a buzzer sounds
Gauges and meters
When the main meter is in the side position, some of the meter displays and the
gauge layout will be changed.
Meter display
A
B
C
D
E
F
G
H
74
2-1. Instrument cluster
and the high coolant temperature warning light comes on
Odometer and trip meter display
Odometer:
Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset
Trip meters “A” and “B” can be used to record and display different distances inde-
pendently
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of vehicle data (
Displays warning messages in case of a malfunction (
■
Rev indicator
When the engine speed reaches a set
speed or the red zone, a ring-shaped
indicator will be displayed on the
tachometer.
The indicator will be displayed in
amber (
) when the engine speed
reaches a set speed, and in red (
)
when the engine speed reaches the
red zone. This setting can be enabled
on the multi-information display.
(
■
Rev peak
When the engine speed reaches or
exceeds the 3600 r/min, an afterim-
age of the tachometer will be displayed
at the highest engine speed for
approximately 1 second.
■
The meters and display illuminate when
The engine switch is in ON.
■
Variable red zone
To help protect the engine, the engine
speed is controlled by starting the red zone
of the tachometer at different engine
speeds ranging from 3700 rpm to 7300
rpm depending on the engine coolant tem-
perature.
Before driving under extremely high load
conditions, make sure to sufficiently warm
up the engine.
I
J
K
A
B
75
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Instrument panel brightness adjustment
The brightness of the instrument panel
lights is automatically adjusted based on the
light sensor detecting how bright the sur-
roundings are.
■
Outside temperature display
●
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
●
When “- -” or “E” is displayed, the system
may be malfunctioning.
Take your vehicle to your Lexus dealer.
■
Speed unit setting for the speedometer
When the speed unit has been changed
from the default setting, the vehicle speed in
the default unit is also displayed in the
meter.
■
Pop-up display
●
In some situations, such as when a switch
operation is performed, a pop-up display
will be temporarily displayed on the
multi-information display.
●
Some pop-up displays can be set on/off.
(
■
Liquid crystal display
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
■
Customization
The meter display can be customized on
the multi-information display. (
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
NOTICE
■
To prevent damage to the engine and
its components
●
Do not let the indicator of the tachom-
eter enter the red zone, as it rep-
resents the engine speed range which
exceeds the maximum safe engine
speed.
●
In the following situations, the engine
may be overheating. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (
• The engine coolant temperature
gauge is in the red zone (H).
• The engine oil temperature gauge is in
the red zone (H).
Changing between the odome-
ter and trip meter
76
2-1. Instrument cluster
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness.
The display can be switched between
the center and side positions.
Changing the Instrument panel
light brightness
Changing the display
77
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
■
Display
When the main meter is in the cen-
ter position
Displays various drive information on
the main meter.
Some of the contents which are dis-
played when the main meter is in the
side position cannot be displayed.
(
When the main meter is in the side
position
Selecting a menu icon displays a vari-
ety of vehicle data or allows vehicle
settings to be customized.
■
Menu icons
■
Opening image display
When the engine switch is in ACC or ON,
the opening image is displayed on the multi-
information display.
While the opening image is being dis-
played, the meter display cannot be
changed even if the drive mode is changed.
When the start-up display is finished, the
meter display for the currently selected
mode will be displayed.
■
When disconnecting and reconnecting
battery terminals
Record of the maximum G-forces will be
reset.
■
Liquid crystal display
Multi-information display
Display and menu icons
Drive information (
P.78)
Navigation system-linked dis-
play (
Audio system-linked display
(
Driving assist system informa-
tion (
Warning message display
(
Settings display (
WARNING
■
Caution for use while driving
●
When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around
the vehicle.
●
Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
78
2-1. Instrument cluster
The multi-information display is oper-
ated using the meter control switches.
/
: Switch menu
/
: Change displayed con-
tent, scroll up/down the screen and
move the cursor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen and
move the main meter
Call sending/receiving and history
display
Linked with the hands-free system,
sending or receiving call is dis-
played. For details regarding the
hands-free system, refer to “NAVI-
GATION SYSTEM OWNER’S
MANUAL”.
■
Content of drive information
Select to display various drive data.
Up to 2 of the following items can be
selected.
Items displayed can be switched by
pressing
or
of the meter con-
trol switches to select
and then
pressing
or .
Current fuel consumption
*1
Displays the current rate of fuel consump-
tion
Average fuel economy (after
reset
*2
/after start/after refuel)
*1
Displays the average fuel consumption
since the function was reset, the engine
was started, and the vehicle was refueled,
respectively
Use the displayed average fuel consump-
tion as a reference.
Average speed (after reset
*2
/after
start)
*1
Displays the average vehicle speed since
the function was reset and the engine was
started, respectively
Elapsed time (after reset
*2
/after
start)
*1
Displays the elapsed time since the func-
tion was reset and the engine was started,
WARNING
■
The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver’s shifting and the new gear num-
ber appearing on the display. This lag
could cause the driver to downshift
again, causing rapid and excessive
engine braking and possibly an accident
resulting in death or injury.
Changing the meter display
A
B
C
D
Drive information
79
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
respectively
Distance (range/after start)
*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine was started respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without turn-
ing the engine switch off, the display may
not be updated.
*1
: Displayed when the item is set in “Drive
Info 1” and “Drive Info 2”.
*2
: The function can be reset by pressing
“OK” of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
■
Eco Driving Indicator/engine oil
temperature gauge
■
Tire pressure
■
Gear positions
Displays the current shift range or gear
position when the shift position is in D
or M.
■
Units
The units of measure used can be
changed while driving.
Unlike the units setting performed on the
settings display, the units setting per-
formed on the drive information menu can
be changed while driving.
■
G-force
Displays lateral G-forces on the vehi-
cle
Reading the display
• Normal display
Displays the following on the multi-infor-
mation display
Acceleration G-force on the vehicle
Current G-force value (analyzed value
of front/rear and left/right G-forces)
• Advanced display
Displays the following on the main meter
and multi-information display
Multi-information display:
Acceleration G-force on the vehicle
Record of the maximum G-forces
A
B
A
B
80
2-1. Instrument cluster
Value of the maximum G-force since
display reset (analyzed value of
front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Main meter:
G-force direction
Current G-force value (analyzed value
of front/rear and left/right G-forces)
This display is intended for use as a guide-
line. Depending on factors such as the
road surface condition, temperature and
vehicle speed, the display may not show
the actual condition of the vehicle.
Switching the display
To switch to advanced display, press “OK”.
To return to normal display, press “OK”.
Resetting the record of maximum
G-forces
With the record of maximum G-forces dis-
played, press and hold “OK” to reset the
display.
Peak hold function (advanced dis-
play only)
If lateral G-forces of 0.5 G or greater are
generated, the G-force value displayed on
the main meter will turn yellow and be held
for 3 seconds.
■
LKA (Lane-Keeping Assist) vehi-
cle sway warning
■
Display off
A blank screen is displayed
Select to display the following naviga-
tion system-linked information.
Route guidance
Compass display
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Select to display the dynamic radar
cruise control with full-speed
range/LKA (Lane-Keeping Assist)
information, when the system is used.
C
A
B
Navigation system-linked dis-
play
Audio system-linked display
Driving assist system informa-
tion
81
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Select to display warning messages
and measures to be taken if a malfunc-
tion is detected. (
Select to change the meter display set-
tings.
■
Language
Select to change the language on the
display.
■
Units
Select to change the unit of measure
for fuel consumption.
■
Eco Driving Indicator Light
Select to activate/deactivate the Eco
Driving Indicator Light.
■
Drive information 1/Drive informa-
tion 2
Select to select up to 2 items that will
be displayed on the “Drive Info 1”
screen and “Drive Info 2” screen
respectively. (
■
Pop-up display
Select to set the following pop-up dis-
plays, which may appear in some situa-
tions, on/off.
• Route guidance display of the navi-
gation system-linked system
• Making call display of the hands-
free phone system
• Audio system operation display
• Voice recognition display
• Instrument panel brightness adjust-
ment display
■
Ring position memory
Select to change the meter ring posi-
tion when the engine is started.
The position before the engine is
stopped or the center position can be
selected.
■
Accent color
Select to change the accent color on
the screen, such as the cursor color.
■
Rev indicator
Select to set the rev indicator on/off.
When set to on, proceed to select the
engine speed at which the rev indica-
tor will be displayed.
■
Rev peak
Select to set the rev peak on/off.
■
Clock
Select to switch between 12-hour dis-
play and 24-hour display.
■
Initialization
Select to reset the meter display set-
tings.
■
Suspension of the settings display
In the following situations, operation of the
settings display will be temporarily sus-
pended.
●
When a warning message appears on the
multi-information display
●
When the vehicle begins to move
■
Customization
The settings can be changed on
of the
multi-information display.
●
Settings of the driving assist systems
(
●
Vehicle settings (
Warning message display
Settings display
82
2-1. Instrument cluster
Displays suggestions to the driver in
the following situations. For some sug-
gestions, a response to a displayed
suggestion can be selected. To select a
response, use the meter control
switches.
■
Suggestion to turn on the head-
lights
If the headlight switch is in other than
or
position, and the vehicle
speed is 3 mph (5 km/h) or higher for
a certain amount of time when the sur-
roundings are dark, a suggestion mes-
sage will be displayed.
■
Suggestion to turn off the head-
lights
If the headlights are left on for a certain
amount of time after the engine switch
has been turned off, a suggestion mes-
sage will be displayed asking if you
wish to turn the headlights off.
When the headlight switch is in the
“AUTO” position: To turn the head-
lights off, select “Yes”.
If a front door is opened after the engine
switch is turned off, this suggestion mes-
sage will not be displayed.
■
Suggestion to unlock the power
windows
If it is attempt to close the passenger’s
side window using the power window
switch on the driver’s door or all win-
dow control switch, a suggestion mes-
sage will be displayed.
■
Customization
The suggestion function can be turned
on/off. (Customizable features:
WARNING
■
Cautions during setting up the dis-
play
As the engine needs to be running
during setting up the display, ensure that
the vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■
While setting up the display
To prevent battery discharge, ensure
that the engine is running while setting up
the display features.
Suggestion function
83
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
*
: If equipped
Navigation system-linked display
area
Displays the following items, which are
linked to the navigation system:
• Speed limit
• Street name
• Route guidance to destination
• Compass
Driving assist system status display
area
Displays the current shift position, and shift
range/gear position, or the operational
status of the following systems:
• Pre-collision warning (Pre-Collision
System) (
• Dynamic radar cruise control with full-
speed range (
• LKA (Lane-Keeping Assist) (
• Intuitive parking assist (
Displayed content is the same as that dis-
played on the multi-information display.
For details, refer to the explanations of
each system.
Vehicle speed display
Information display area (
P.85)
Displays the following items:
• Warning/message
•
/
icon (
• Audio system operation status
• Dynamic radar cruise control with full-
speed range status (
• Hands-free system status (
• Eco Driving Indicator/tachometer
(
P.86)
HUD (Head-up display) switch
■
Enabling/Disabling the head-up
display
Pressing the switch turns the head-up
display on/off.
Head-up display
*
The head-up display is linked to the
meters and navigation system and
projects a variety of information in
front of the driver, such as the cur-
rent vehicle speed and route guid-
ance to a set destination.
System components
A
B
Using the head-up display
C
D
E
84
2-1. Instrument cluster
■
Changing settings of the head-up
display
Select
on the multi-information dis-
play (
settings:
Display brightness/position
Select to adjust the brightness and position
of the head-up display.
Eco Driving Indicator/tachometer
Select to display Eco Driving Indicator,
tachometer or no content.
Display content
Select to enable/disable the following
items:
• Route guidance to destination
• Driving assist system status
• Compass
• Audio system operation status
Display angle
Select to adjust the angle of the head-up
display.
■
Head-up display
●
The head-up display may seem dark and
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up dis-
play or remove your sunglasses.
●
When the head-up display is turned off, it
will remain off even if the engine switch is
turned to ACC or ON after the engine
switch has been turned off.
●
The startup image will be displayed on
the head-up display after the engine
switch has been turned to ON while the
head-up display switch is set to on.
■
Display brightness
The brightness of the head-up display can
be adjusted on
of the multi-information
display. Also, it is automatically adjusted
according to the ambient brightness.
■
Head-up display automatic position
adjustment
If the display position is recorded into mem-
ory, the head-up display will be automati-
cally adjusted to the desired position.
(
■
When the battery is disconnected
The customize settings of the head-up dis-
play will be reset.
■
Customization
Settings (e.g. display) can be changed.
(Customizable features:
WARNING
■
Before using the head-up display
●
Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
●
Do not continuously look at the head-
up display while driving as you may fail
to see pedestrians, objects on the
road, etc. ahead of the vehicle.
■
Caution for changing settings of the
head-up display
As the engine needs to be running while
changing the settings of the head-up dis-
play, ensure that the vehicle is parked in a
place with adequate ventilation. In a
closed area such as a garage, exhaust
gases including harmful carbon monox-
ide (CO) may collect and enter the vehi-
cle. This may lead to death or a serious
health hazard.
85
2-1. Instrument cluster
2
Vehi
cle
status
inform
ati
on a
nd i
ndic
ators
Displays the following items in the
appropriate situation:
■
Warning/message
Displays the following warning/mes-
sages:
• Master warning message
• Notification message (Dynamic
radar cruise control with full-speed
range)
• Other messages
■
/
icons
Displays the following multi-informa-
tion display linked icons:
: Master warning icon
Displayed when a warning message is dis-
played on the multi-information display.
(
: Information icon
Displayed when a suggestion/advice pop-
up display is displayed on the multi-infor-
mation display. (
■
Hands-free system status
Displayed when the hands-free system
is operated.
■
Audio system operation status
Displayed when the audio system is
operated.
■
Eco Driving Indicator/tachometer
Displays either of Eco Driving Indica-
tor or the tachometer.
Displays the following items which are
linked to the navigation system:
■
Speed limit
Displays the speed limit on the current
road.
■
Street name
When the navigation system is per-
forming route guidance, the name of
the next street will be displayed on the
top of the display area.
NOTICE
■
To prevent damage to components
●
Do not place any drinks near the head-
up display projector. If the projector
gets wet, electrical malfunctions may
result.
●
Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
●
Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector.
Doing so could cause mechanical mal-
functions.
■
When changing the settings of the
head-up display
To prevent battery discharge, ensure
that the engine is running while changing
the settings of the head-up display.
Information display area
Navigation system-linked dis-
play area
86
2-1. Instrument cluster
■
Route guidance to destination
Displayed when the navigation system
is performing route guidance. When
approaching an intersection, an arrow
will be displayed to indicate the sug-
gested direction of travel.
■
Compass
Displays the direction of travel.
■
Street name display
Only street names which are included in the
map data will be displayed.
■
Eco Driving Indicator
Eco Driving Indicator Zone Display
Eco driving ratio based on acceler-
ation
Zone of Eco driving
Displayed content is the same as that dis-
played on the multi-information display
(Eco Driving Indicator). For details, refer to
P.71.
■
Tachometer
Displays the engine speed in revolu-
tions per minute.
Center Display
“MENU” button
Touchpad
Press the “MENU” button on the
Remote Touch, then select
on the
screen, and then select “Trip Informa-
tion” or “History”.
Eco Driving Indicator/tachome-
ter
A
B
C
Fuel consumption informa-
tion
Fuel consumption information can
be displayed on the Center Display.
The consumption screen can be
displayed on the side display.
System components
Consumption
A
B
C
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст