Lexus LC500C (2022 year). Manual in english — page 22
![](/vehicles/qusi/zaryoleandoh/qusmotheve/lda.png)
363
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
8-2.Customization
■
Changing by using the meter con-
trol switches
1
Press
or
of the meter con-
trol switches, and select
.
2
Press
or
of the meter con-
trol switches, select the item, and
press “OK”.
3
Press
or
of the meter con-
trol switches, select the desired set-
ting, and press “OK”.
To go back to the previous screen or
exit the customize mode, press
.
■
Changing by using the Remote
Touch
1
Press the “MENU” button on the
Remote Touch.
2
Select “Setup” on the menu screen
and select “Vehicle”.
3
Select “Vehicle Customization”,
“LEXUS Park Assist” or “Drive
Mode Customization”.
Various setting can be changed. Refer
to the list of settings that can be
changed for details.
For details on the Remote Touch, refer
to the “NAVIGATION SYSTEM
OWNER’S MANUAL”.
■
When customizing using the Remote
Touch
Stop the vehicle in a safe place, apply the
parking brake, and shift the shift position to
P. Also, to prevent battery discharge, leave
the engine running while customizing the
features.
Some function settings are changed simultaneously with other functions being cus-
tomized. Contact your Lexus dealer for further details.
Settings that can be changed using the Remote Touch
Customizable features
Your vehicle includes a variety of
electronic features that can be per-
sonalized to your preferences. The
settings of these features can be
changed by using the meter control
switches, the Remote Touch or at
your Lexus dealer.
Customizing vehicle features
WARNING
■
During customization
As the engine needs to be running
during customization, ensure that the
vehicle is parked in a place with ade-
quate ventilation. In a closed area such as
a garage, exhaust gases including harm-
ful carbon monoxide (CO) may collect
and enter the vehicle. This may lead to
death or a serious health hazard.
NOTICE
■
During customization
To prevent battery discharge, ensure
that the engine is running while custom-
izing features.
Customizable features
A
![](/vehicles/qusi/zaryoleandoh/qusmotheve/fup.png)
364
8-2. Customization
Settings that can be changed using the meter control switches
Settings that can be changed by your Lexus dealer
Definition of symbols: O = Available,
= Not available
■
Gauges, meters and multi-information display (
Function
*1
Default setting Customized setting
Language
English
French
O
*4
O
Spanish
Units
*2
miles (MPG)
km (km/L)
O
*4
O
km (L/100 km)
miles (MPG Impe-
rial)
Eco Driving Indicator Light
Off
On
(Self-lighting)
O
Drive information 1
Current fuel
economy
*3
O
Average fuel
economy
(after reset)
Drive information 2
Distance
(driving range)
*3
O
Average vehi-
cle speed
(after reset)
Pop-up display
On
Off
O
Ring position memory
On
Off
O
Accent color
Color 1
Color 2
O
*4
O
Rev indicator
Off
On
O
Rev indicator red zone setting
5000 r/min
2000 - 7300
r/min
O
Rev peak
Off
On
O
Clock
12-hour display
24-hour display
O
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/inebat.png)
365
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
*1
: For details about each function:
*2
: The default setting varies according to country.
*3
: 2 of the following items: current fuel consumption, average fuel economy (after reset),
average fuel economy (after start), average fuel economy (after refuel), average vehicle
speed (after reset), average vehicle speed (after start), elapsed time (after reset),
elapsed time (after start), distance (driving range), distance (after start), blank.
*4
: Refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.
■
HUD (Head-up Display)
*
(
*
: If equipped
■
LKA (Lane-Keeping Assist) (
Suggestion function
On
On
(when the vehicle is
stopped)
O
O
Off
Function
Default setting Customized setting
Gauge information
Tachometer
Eco Driving Indica-
tor Light
O
No display
Driving support display (Naviga-
tion system)
On
Off
O
Driving support display (Lane dis-
play)
On
Off
O
Driving support display (Driving
assist)
On
Off
O
Driving support display (Compass)
On
Off
O
Driving support display (Audio)
On
Off
O
Function
Customized setting
Lane centering function
On, Off
O
Steering assist
On, Off
O
Alert sensitivity
Standard, High
O
Function
*1
Default setting Customized setting
A
B
C
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/mppuuind.png)
366
8-2. Customization
■
PCS (Pre-Collision System) (
*
: The system is automatically enabled each time the engine switch is turned to ON.
■
BSM (Blind Spot Monitor) (
*
: BSM function only
Vehicle sway warning
On, Off
O
Vehicle sway warning sensitivity
Low, Standard, High
O
Function
Customized setting
PCS (Pre-Collision System)
*
On, Off
O
Adjust alert timing
Far, Middle, Near
O
Function
Default setting Customized setting
BSM (Blind Spot Monitor)
On
Off
O
RCTA (Rear Cross Traffic Alert)
On
Off
O
Outside rear view mirror indicator
brightness
Bright
Dim
O
Alert timing for presence of
approaching vehicle (sensitivity)
*
(Intermediate)
(Early)
O
(Late)
(Only when in blind
spot)
RCTA buzzer volume
Level 2
Level 1
O
Level 3
Function
Customized setting
A
B
C
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/ulenowo.png)
367
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
■
Door lock (
■
Smart access system with push-button start and wireless remote control
(
Function
Default setting Customized setting
Unlocking using a mechanical key
Driver’s door
unlocked in one
step, both side
doors unlocked
in two steps
Both side doors
unlocked in one
step
O
Automatic door lock
Shifting the shift
position to
position other
than P
Off
O
O
Vehicle speed is
approximately 12
mph (20 km/h) or
higher
Automatic door unlock
Shifting the shift
position to P
Off
O
O
Driver’s door is
opened
Locking/unlocking of the trunk
when both side doors are
locked/unlocked
On
Off
O
Time elapsed before the door lock
indicator lights turn off
30 seconds
1 minute
O
10 minutes
20 minutes
Function
Default setting Customized setting
Operating signal (Buzzers)
5
Off
O
O
1 to 7
Operation signal (Emergency
flashers)
On
Off
O
O
Time elapsed before automatic
door lock function is activated if
door is not opened after being
unlocked
60 seconds
Off
O
O
30 seconds
120 seconds
Open door warning buzzer
On
Off
O
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/ken.png)
368
8-2. Customization
■
Smart access system with push-button start (
■
Wireless remote control (
■
Driving position memory (
Function
Default setting Customized setting
Smart access system with push-
button start
On
Off
O
Smart door unlocking
Driver’s door
Both side doors
O
O
Number of consecutive door lock
operations
2 times
As many as desired
O
Function
Default setting Customized setting
Wireless remote control
On
Off
O
Unlocking operation
Driver’s door
unlocked in one
step, both side
doors unlocked
in two steps
Both side doors
unlocked in one
step
O
O
Trunk unlocking operation
Press and hold
(short)
One short press
O
Push twice
Press and hold
(long)
Off
Alarm (panic mode)
On
Off
O
Reservation lock
On
Off
O
O
Function
Default setting Customized setting
Selecting the door linking driving
position memory with door unlock
operation
Driver’s door
Both side doors
O
Driver’s seat slide movement when
exiting the vehicle
Full
Off
O
O
Partial
A
B
C
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/dowro.png)
369
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
■
Outside rear view mirrors (
■
Power windows (
■
Turn signal lever (
■
Automatic light control system (
Steering wheel movement
Tilt only
Telescopic only
O
O
Tilt & telescopic
Off
Function
Default setting Customized setting
Automatic mirror folding and
extending operation
Linked to the
lock-
ing/unlocking
of the doors
Off
O
Linked to operation
of the engine switch
Function
Default setting Customized setting
Mechanical key linked operation
Off
On
O
Wireless remote control linked
operation
Off
On
(Open only)
O
Wireless remote control linked
operation signal (buzzer)
On
Off
O
Function
Default setting Customized setting
The number of times the turn signal
lights flash automatically when the
turn signal lever is moved to the
first position during a lane change
3
5
O
7
Off
Function
Default setting Customized setting
Light sensor sensitivity
Standard
-2 to 2
O
O
Function
Default setting Customized setting
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/nises.png)
370
8-2. Customization
■
Lights (
*
: U.S.A. only
■
Automatic air conditioning system (
■
Seat heater/seat ventilators (
■
Heated steering wheel
*
(
*
: If equipped
Time elapsed before headlights
automatically turn off after doors
are closed
30 seconds
Off
O
O
60 seconds
90 seconds
Windshield wiper linked headlight
illumination
On
Off
O
Function
Default setting Customized setting
Daytime running lights
*
On
Off
O
O
Welcome light illumination control
On
Off
O
Function
Default setting Customized setting
A/C auto switch operation
On
Off
O
O
Exhaust gas sensor sensitivity
Standard
-3 to 3
O
O
Function
Default setting Customized setting
Driver’s seat temperature prefer-
ence in automatic mode
Standard
-2 (cooler) to 2
(warmer)
O
O
Passenger’s seat temperature
preference in automatic mode
Standard
-2 (cooler) to 2
(warmer)
O
O
Function
Default setting Customized setting
Steering wheel heating preference
in automatic mode
Standard
-2 (low) to 2 (high) O
O
Function
Default setting Customized setting
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/zinohie.png)
371
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
■
Illumination (
■
Alarm (
*
: The default setting for Canada is different.
Function
Default setting Customized setting
Time elapsed before the interior
lights turn off
15 seconds
Off
O
O
7.5 seconds
30 seconds
Operation after the engine switch
is turned off
On
Off
O
Operation when the doors are
unlocked
On
Off
O
Operation when you approach the
vehicle with the electronic key on
your person
On
Off
O
Footwell lighting
On
Off
O
Door trim ornament lights
On
Off
O
Time elapsed before the outside
door handle lights turn off
15 seconds
Off
O
O
7.5 seconds
30 seconds
Operation of the outside door han-
dle lights when the doors are
unlocked
On
Off
O
Operation of the outside door han-
dle lights when a door is opened
On
Off
O
Fading out of the outside door han-
dle lights when they turn off
Long
Short
O
Function
Default setting Customized setting
Cancellation when the mechanical
key is used to unlock
*
On
Off
O
A
B
C
A
B
C
![](/vehicles/qusi/zaryoleandoh/qusmotheve/riui.png)
372
8-2. Customization
■
Rain-sensing windshield wipers (
■
Seat belt reminder buzzer (
■
Intuitive parking assist (
■
Driving mode select switch (
■
Vehicle customization
●
When the Smart access system with
push-button start is off, the entry unlock
function cannot be customized.
●
When the doors remain closed after
unlocking the doors and the timer acti-
vated automatic door lock function acti-
vates, signals will be generated in
accordance with the operation buzzer
volume and operational signal (Emer-
Function
Default setting Customized setting
Wiper operation when the wiper
switch is in the AUTO position
Rain-sensing
operation
Intermittent opera-
tion linked to vehicle
speed (with interval
adjuster)
O
Function
Default setting Customized setting
Speed-linked seat belt reminder
function
On
Off
O
Function
Default setting Customized setting
Intuitive parking assist
On
Off
O
Detection distance of the front
center sensor
Far
Near
O
O
Detection distance of the rear cen-
ter sensor
Far
Near
O
O
Buzzer volume
Level 2
Level 1
O
O
Level 3
Function
Default setting Customized setting
Powertrain control in custom
mode
Normal
Power
O
Eco
Chassis control in custom mode
Normal
Sport
O
Comfort
Air conditioning operation in cus-
tom mode
Normal
Eco
O
A
B
C
A
B
C
A
B
C
A
B
C
373
8-2. Customization
8
Vehi
cle
spec
ifi
ca
tions
gency flashers) function setting.
●
Some settings can be changed using a
switch or the Center Display. If a setting
is changed using a switch, the changed
setting will not be reflected on the Center
Display until the engine switch is turned
off and then to ON.
![](/vehicles/qusi/zaryoleandoh/qusmotheve/pad.png)
374
8-3. Items to initialize
8-3.Items to initialize
Items to initialize
The following items must be initialized for normal system operation after such
cases as the battery being reconnected, or maintenance being performed on
the vehicle:
List of the items to initialize
Item
When to initialize
Reference
Tire pressure warning system
• When rotating the tires.
• When the tire inflation pressure is
changed by changing tire size.
(When there are multiple speci-
fied pressures)
• After registering the ID codes.
• When the tire inflation pressure is
changed such as when changing
traveling speed.
Power windows
• When functioning abnormally
Lexus parking assist monitor
• The steering wheel has been
moved while the battery was
being reinstalled.
• Battery power is low.
Refer to “NAV-
IGATION
SYSTEM
OWNER’S
MANUAL”.
Message indicating maintenance is
required
• After the maintenance is per-
formed
375
9
9
For owners
For owners
9-1. For owners
Reporting safety defects for U.S.
owners . . . . . . . . . .
Reporting safety defects for
Canadian owners. . . . ...
Seat belt instructions for Cana-
dian owners (in French). ...
SRS airbag instructions for Cana-
dian owners (in French). ...
Headlight aim instructions for
Canadian owners (in French)
. . . . . . . . . . . . . .
376
9-1. For owners
9-1.For owners
Reporting safety defects for
U.S. owners
If you believe that your vehicle has
a defect which could cause a crash
or could cause injury or death, you
should immediately inform the
National Highway Traffic Safety
Administration (NHTSA) in addi-
tion to notifying the Lexus Division
of Toyota Motor Sales, U.S.A., Inc.
(Toll-free: 1-800-25-LEXUS).
If NHTSA receives similar com-
plaints, it may open an investiga-
tion, and if it finds that a safety
defect exists in a group of vehicles,
it may order a recall and remedy
campaign. However, NHTSA can-
not become involved in individual
problems between you, your
dealer, or Lexus Division of Toyota
Motor Sales, U.S.A., Inc.
To contact NHTSA, you may call
the Vehicle Safety Hotline toll-free
at 1-888-327-4236 (TTY: 1-800-
424-9153); go to
http://www.saf-
ercar.gov
; or write to: Administra-
tor, NHTSA, 1200 New Jersey
Ave. SE., Washington, DC 20590.
You can also obtain other informa-
tion about motor vehicle safety
from
http://www.safercar.gov.
Reporting safety defects for
Canadian owners
Canadian customers who wish to
report a safety-related defect to
Transport Canada, Defects Investi-
gations and Recalls, may telephone
the toll-free hotline 1-800-333-
0510, mail Transport Canada -
ASFAD, 330 Sparks Street,
Ottawa, ON, K1A 0N5, or com-
plete the online form at
https://www.tc.gc.ca/recalls.
![](/vehicles/qusi/zaryoleandoh/qusmotheve/coumoolin.png)
377
9-1. For owners
9
For owners
Tirez sur la ceinture épaulière
jusqu’à ce qu’elle recouvre entière-
ment l’épaule; elle ne doit cepen-
dant pas toucher le cou ni glisser de
l’épaule.
Placez la ceinture abdominale le
plus bas possible sur les hanches.
Réglez la position du dossier.
Tenezvous assis bien au fond du
siège, le dos droit.
Ne vrillez pas la ceinture de sécu-
rité.
Non vrillée
Vrillée
Les sièges avant sont dotés de guides à
travers desquels la ceinture de sécurité
doit passer. Lorsque vous utilisez la
ceinture de sécurité, assurez-vous que
la ceinture passe à travers le guide.
Lorsque vous vous asseyez sur un siège
arrière ou que vous sortez du véhicule,
retirez la ceinture de sécurité de son
guide.
■
Manipulation des ceintures de
sécurité
Avec un chiffon ou une éponge, net-
toyez à l’aide d’un savon doux et de
l’eau tiède. Vérifiez aussi les ceintures
régulièrement pour vous assurer
Seat belt instructions for
Canadian owners (in
French)
The following is a French explana-
tion of seat belt instructions
extracted from the seat belt section
in this manual.
See the seat belt section for more
detailed seat belt instructions in
English.
Utilisation adéquate des cein-
tures de sécurité
Guide de ceinture de sécurité
Entretien et soin
A
B
378
9-1. For owners
qu’elles ne présentent pas d’usure
excessive, d’effilochage ou de cou-
pures.
AVERTISSEMENT
■
Dommages et usure de la ceinture de
sécurité
Vérifiez périodiquement le système de
ceintures de sécurité. Vérifiez qu’il n’y a
pas de coupures, d’effilochures ni de
pièces desserrées. N’utilisez pas une
ceinture de sécurité endommagée avant
qu’elle ne soit remplacée. Les ceintures
de sécurité endommagées ne peuvent
pas protéger les occupants contre les
blessures graves, voire mortelles.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст