Defender (1999-2002). Manual — part 112
![](/vehicles/onond/ycatth/que/zulowerersou.png)
77
PANEL REPAIRS
24
SEALING AND CORROSION PROTECTION
Putty location on underside of vehicle
![](/vehicles/onond/ycatth/que/xiav.png)
PANEL REPAIRS
25
SEALING AND CORROSION PROTECTION
Putty location on front door
![](/vehicles/onond/ycatth/que/xio.png)
77
PANEL REPAIRS
26
SEALING AND CORROSION PROTECTION
FOAM/RUBBER SEAL APPLICATION AREAS
The following Illustrations show the location of foam/rubber seals. All areas
All areas symmetrically opposite to those shown are also treated.
Body side rear
M77 2093A
A
A
B
B
A - A
B - B
Section A-A shows a rubber seal in position on the body side rear upper assembly.
CAUTION: Ensure rubber seal is correctly seated into channel.
Section B-B shows a foam seal located on the bottom edge of the body side rear upper assembly. It is fixed to the
panel using double sided tape.
![](/vehicles/onond/ycatth/que/juld.png)
PANEL REPAIRS
27
SEALING AND CORROSION PROTECTION
Body side lower
The arrows indicate the positon of two foam seals.
CAUTION: Ensure seals are fitted before refitting assembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст