Freelander Body Repair Manual — part 32
![](/vehicles/onond/veyondd/mowous/ffeco.png)
BODY
26
DOORS
DOOR RELEASE - INTERIOR - FRONT DOOR - 3
DOOR
Service repair no - 76.37.31
Remove
1. Remove upper water shedder.
See this
section.
2. Drill out 2 rivets from door release.
3. Remove door release.
4. Release cable from door release.
Refit
1. Connect cable to door release.
2. Position door release and secure with rivets.
3. Fit water shedder.
See this section.
DOOR RELEASE - INTERIOR - FRONT DOOR - 5
DOOR
Service repair no - 76.37.31
Remove
1. Remove front door water shedder.
See this
section.
2. Drill out 2 rivets from door release.
3. Remove door release.
4. Release cable from door release.
Refit
1. Connect cable to door release.
2. Position door release and secure with rivets.
3. Fit water shedder.
See this section.
![](/vehicles/onond/veyondd/mowous/xakierteerel.png)
BODY
DOORS
27
DOOR RELEASE - INTERIOR - REAR DOOR
Service repair no - 76.37.32
Remove
1. Remove rear door water shedder.
See this
section.
2. Release cable from door release.
3. Drill out 2 rivets from door release.
4. Remove door release.
Refit
1. Connect cable to door release.
2. Position door release and secure with rivets.
3. Fit water shedder.
See this section.
CABLE - INTERIOR DOOR RELEASE - FRONT
DOOR
Service repair no - 76.37.60
Remove
1. Remove front door latch.
See this section.
2. Release cable from interior door release and
remove cable.
Refit
1. Connect cable to interior door release.
2. Fit door latch.
See this section.
![](/vehicles/onond/veyondd/mowous/opror.png)
BODY
28
DOORS
CABLE - INTERIOR DOOR RELEASE - REAR
DOOR
Service repair no - 76.37.61
Remove
1. Remove rear door latch.
See this section.
2. Release cable from door release and remove
cable.
Refit
1. Connect and secure cable to door release.
2. Fit door latch.
See this section.
FINISHER - UPPER - TAIL DOOR GLASS
Service repair no - 76.43.74
Remove
1. Remove tail door glass side finishers.
See this
section.
2. Release 5 clips securing finisher to bracket.
3. Remove tail door glass upper finisher.
4. Remove and discard clips from finisher and/or
bracket.
Refit
1. Fit NEW clips to finisher.
2. Fit finisher and secure clips to bracket.
3. Fit tail door glass side finishers.
See this
section.
![](/vehicles/onond/veyondd/mowous/ckou.png)
BODY
DOORS
29
FINISHER - SIDE - TAIL DOOR GLASS
Service repair no - 76.43.81
Remove
1. Open tail door.
2. Release tail door glass seal from aperture for
access to side finisher fixings.
3. Using a suitable trim stud removal tool, release
3 side finisher fixings from studs on body.
4. Remove side finisher from upper fixing.
5. Remove and discard fixings from finisher.
Refit
1. Fit NEW fixings to finisher.
2. Fit door glass seal to flange.
3. Fit finisher and secure fixings.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст