Defender. Manual — part 255
Seating - Front Seat Cushion Heater Mat
Removal and Installation
Removal
1. NOTE: The front seat cushion heater mat is part of the front
seat cushion and cannot be serviced separately.
Remove the front seat cushion.
For additional information, refer to:
Front Seat Cushion
(501-
10 Seating, Removal and Installation).
Installation
1. Install the front seat cushion.
For additional information, refer to:
Front Seat Cushion
(501-
10 Seating, Removal and Installation).
Seating - Heated Seat Switch
Removal and Installation
Removal
1. Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and
Connect
(414-01 Battery, Mounting and Cables, General
Procedures).
2. Remove the audio unit.
For additional information, refer to:
Audio Unit
(415-01A
Audio Unit, Removal and Installation).
3. Release the instrument panel console.
4. Release the heated seat switch.
5. Remove the heated seat switch.
Disconnect the electrical connector.
Installation
1. To install, reverse the removal procedure.
2. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01
Battery, Mounting and Cables, General Procedures).
Seating - Rear Seat
Removal and Installation
Removal
1. Release the front edge of the rear seat.
Remove the upper 2 bolts.
Loosen the lower 2 bolts.
2. Remove the rear seat.
Tilt the rear seat forwards.
Remove the 2 nuts.
Installation
1. Install the rear seat.
Tighten the nuts to 23 Nm (17 lb.ft).
Lock the rear seat back in to position.
2. Secure the front edge of the rear seat.
Tighten the bolts to 23 Nm (17 lb.ft).
Seating - Rear Seat Backrest
Removal and Installation
Removal
1. Remove the 2 rear seat head restraints.
Release the 2 clips.
2. Remove the rear seat backrest trim panel.
Release the 11 clips.
3. Reposition the rear center safety belt guide cover.
Remove the 2 screws.
4. Remove the 4 rear seat head restraint guides.
Release the 4 clips.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст