Defender 300Tdi (1996+). Manual — part 5
04
GENERAL SPECIFICATION DATA
4
INFORMATION
Front axle
Type
Spiral bevel, enclosed constant velocity joints, fully
. . . . . . . . . . . . . . . . . . . . .
floating shafts, 32
°
angularity of universal joint on full
lock
Ratio
3.54:1
. . . . . . . . . . . . . . . . . . . . .
Propeller shafts
Type, front and rear
Tubular 51 mm dia.
. . . . . . . . . . . . . . ..
Universal joints
Open type Hookes O3EHD
. . . . . . . . . . . . . . . . .
STEERING
Power steering box
Make/type
Adwest Varamatic - worm and roller box
. . . . . . . . . . . . . . . . . .
Ratio
Variable: straight ahead 19.3:1 on lock 14.3:1
. . . . . . . . . . . . . . . . . . . . .
Steering wheel turns, lock-to-lock
3.375
. . . . . . . . .
Steering pump
Make/type
Hobourn-Eaton series 500
. . . . . . . . . . . . . . . . . .
Steering geometry
Steering wheel diameter
412 mm (16.22 in)
. . . . . . . . . . . . ..
Toe-out measurement
0 to 2 mm toe out
. . . . . . . . . . . . . ..
Toe-out included angle
0
°
to 0
°
20’
. . . . . . . . . . . . . .
Camber angle
0
°
*
. . . . . . . . . . . . . . . . ..
Castor angle
3
°
*
. . . . . . . . . . . . . . . . . .
Swivel pin inclination static
7
°
*
. . . . . . . . . . . ...
* Check with vehicle on level ground, in unladen
condition and five gallons of fuel. Rock the front of the
vehicle up and down to allow it to take up a normal
static position.
Turning circle between kerbs
90 models:
265/75 x 16 tyres
12,65 m (41.5 ft)
. . . . . . . . . . . . . . . ..
All other tyres
11,70 m (38.4 ft)
. . . . . . . . . . . . . . . . ...
110 models:
750 x 16 tyres
13,41 m (44 ft)
. . . . . . . . . . . . . . . . ..
130 models:
750 x 16 tyres
15,24 m (50 ft)
. . . . . . . . . . . . . . . . ..
GENERAL SPECIFICATION DATA
5
INFORMATION
SUSPENSION
Type
Coil springs controlled by telescopic dampers front
. . . . . . . . . . . . . . . . . . . . .
and rear.
Front
Transverse location of axle by Panhard rod, and fore
. . . . . . . . . . . . . . . . . . . . .
and aft location by two radius arms. Anti-roll bar fitted
as standard on 90 models with 265/75 tyres and 130
models.
Rear
Fore and aft movement inhibited by two tubular trailing
. . . . . . . . . . . . . . . . . . . . .
links. Lateral location of axle by a centrally positioned
’A’ frame, upperlink assembly, bolted at the apex to a
ball joint mounting. Anti-roll bar fitted as standard on
90 models with 265/75 tyres, 110 models with self
levelling unit, and 130 models.
ROAD SPRING DATA
90 (2400 Kg)
Part No.
Colour Code
Front - Driver’s side
NRC 9446
Blue/green
Front - Passenger side
NRC 9447
Blue/yellow
Rear - Driver’s side
NRC 9448
Blue/red
Rear - Passenger side
NRC 9449
Yellow/white
90 (2550 Kg)
Front - Driver’s side
NRC 9446
Blue/green
Front - passenger side
NRC 9447
Blue/yellow
Rear - Driver’s side
NRC 9462
Green/yellow/red
Rear - Passenger side
NRC 9463
Green/yellow/white
110 (3050 Kg)
Front - both sides
NRC 8045
Yellow/yellow
Rear - both sides
NRC 6904
Red/green
110 Levelled (2950 Kg)
Front - both sides
NRC 8045
Yellow/yellow
Rear - both sides
NRC 7000
Green/white
110 (3400 Kg)
Front - both sides
NRC 8045
Yellow/yellow
Rear - both sides
NRC 6904
Red/green
Rear helper springs - both sides
RRC 3266
No colour code
110 (3600 Kg)
Front - Driver’s side
NRC 9448
Blue/red
Front - passenger side
NRC 9449
Yellow/white
Rear - both sides
NRC 6904
Red/green
Rear helper springs - both sides
RRC 3226
No colour code
130 (3500 Kg)
Front - driver’s side
NRC 9448
Blue/red
Front - passenger side
NRC 9449
Yellow/white
Rear - driver’s side
NRC 6389
Red/red
Rear - passenger side
NRC 6904
Red/green
Front/rear helper springs - both sides
RRC 3266
No colour code
04
GENERAL SPECIFICATION DATA
6
INFORMATION
SHOCK ABSORBERS
Type
Telescopic, double-acting non-adjustable
. . . . . . . . . . . . . . . . . . . . .
Bore diameter
35.47mm
. . . . . . . . . . . . . . . . ...
BRAKES
Front service brake
Caliper
AP Lockheed, four opposed pistons
. . . . . . . . . . . . . . . . . . . ..
Operation
Hydraulic, self adjusting
. . . . . . . . . . . . . . . . . . .
Disc
90 - Solid, outboard, 110/130 - Ventilated, outboard
. . . . . . . . . . . . . . . . . . . . ..
Disc diameter
298 mm (11.73 in)
. . . . . . . . . . . . . . . . ...
Disc thickness
90 - 14,1 mm (0.56in), 110/130 - 24mm (0.95 in)
. . . . . . . . . . . . . . . . ..
Wear limit
1 mm (0.04in) per side of disc
. . . . . . . . . . . . . . . . . . .
Disc run-out maximum
0,15mm (0.006 in)
. . . . . . . . . . . . . .
Pad area
58 cm
2
(9.0 in
2
)
. . . . . . . . . . . . . . . . . . ..
Total swept area
801,3 cm
2
(124.2 in
2
)
. . . . . . . . . . . . . . . ...
Pad material
Ferodo 3440 non asbestos
. . . . . . . . . . . . . . . . . .
Pad minimum thickness
3 mm (0.12in)
. . . . . . . . . . . . ...
Rear service brake
Caliper
AP Lockheed opposed piston
. . . . . . . . . . . . . . . . . . . ..
Operation
Hydraulic, self adjusting
. . . . . . . . . . . . . . . . . . .
Disc
Solid, outboard
. . . . . . . . . . . . . . . . . . . . ..
Disc diameter
90 - 290 mm (11.42 in), 110/130 - 298 mm (11.73)
. . . . . . . . . . . . . . . . ...
Disc thickness
90 - 12,5 mm (0.49 in), 110/130 - 14,1 mm (0.56 in)
. . . . . . . . . . . . . . . . ..
Wear limit
90 - 0,38 mm (0.015 in), 110/130 - 1,0 mm (0.04 in)
. . . . . . . . . . . . . . . . . . .
per side of disc
Disc run-out maximum
0,15 mm (0.006 in)
. . . . . . . . . . . . . .
Pad area
90 - 30,5 cm
2
(4.37 in
2
), 110/130 - 36,2 cm
2
(5.61 in
2
)
. . . . . . . . . . . . . . . . . . ..
Total swept area
90 - 694 cm
2
(106.98 in
2
)
. . . . . . . . . . . . . . . ...
Pad material
Ferodo 3440 non asbestos
. . . . . . . . . . . . . . . . . .
Pad minimum thickness
3 mm (0.12 in)
. . . . . . . . . . . . ...
Parking brake
Type
Mechanical, cable operated drum brake on the rear of
. . . . . . . . . . . . . . . . . . . . .
the transfer gearbox output shaft
Drum internal diameter
254 mm (10.0 in)
. . . . . . . . . . . . . .
Width
70 mm (2.75 in)
. . . . . . . . . . . . . . . . . . . .
Pad material
Ferodo 3611 non asbestos
. . . . . . . . . . . . . . . . . .
Servo/master cylinder
Manufacturer
Lucas
. . . . . . . . . . . . . . . . .
Servo type
LSC 80
. . . . . . . . . . . . . . . . . .
Master cylinder type
25,4 mm (1.0 in) diameter, tandem
. . . . . . . . . . . . . . .
Pressure reducing valve, failure conscious
Cut-in pressure, 90 - 24 bar (360 Ibf/in
2
) ratio 4.0:1,
. . . . . ..
110 - 43 bar (645 Ibf/in
2
) ratio 2.9:1*
NOTE: * Pressure reducing valves are not fitted to all 110 specifications.
GENERAL SPECIFICATION DATA
7
INFORMATION
AIR CONDITIONING
System
CFC free expansion valve system
. . . . . . . . . . . . . . . . . . . .
Compressor
Sanden TRS105N
. . . . . . . . . . . . . . . . . .
Refrigerant
R134a CFC free
. . . . . . . . . . . . . . . . . ...
Charge quantity
1.1 Kg
. . . . . . . . . . . . . . . .
WIPER MOTORS
Tailgate wiper motor
Make/type
IMOS (non-serviceable)
. . . . . . . . . . . . . . . . . .
Running current, wet screen at 20
°
C ambient
1.0 to 2.8 amps
. . . . .
Wiper speed, wet screen at 20
°
C ambient
37 to 43 cycles per minute
. . . . . ...
Windscreen wiper motor
Make/type
Lucas 14W uprated two speed
. . . . . . . . . . . . . . . . . .
Armature end float
0,1 to 0,2 mm
. . . . . . . . . . . . . . .
Brush length, minimum
4,8 mm
. . . . . . . . . . . . .
Brush spring tension
140 to 200 g
. . . . . . . . . . . . . .
Resistance of armature winding
at 16˚C (69˚F) measured between adjacent
commutatator segments
0.23 to 0.35 ohms
. . . . . . . . . . . . ...
Light running, rack disconnected: current at 13.5 V
2.0 amps
. . .
Wiper speed, wet screen, 60 seconds from cold
Low speed - 45
±
3 rev/min, High speed - 65
±
5
. . . ..
rev/min
ELECTRICAL
System
12 volt, negative ground
. . . . . . . . . . . . . . . . . . . .
Battery
Make/type - standard
Land Rover Parts and Equipment/Lucas maintenance
. . . . . . . . . . . . . ...
free 9-plate 072
Make/type - heavy duty
Land Rover Parts and Equipment/Lucas maintenance
. . . . . . . . . . . . .
free 14-plate 663
Generator
Manufacturer
Magnetti Marelli
. . . . . . . . . . . . . . . . .
Type
A127 - 100amp
. . . . . . . . . . . . . . . . . . . . .
Polarity
Negative ground
. . . . . . . . . . . . . . . . . . . .
Brush length:
New
17 mm
. . . . . . . . . . . . . . . . . . .
Worn, minimum free protrusion from moulding
5 mm
. .
Brush spring pressure flush with moulding
1.3N to 2.7N
. . . . . ..
Regulator voltage
13.6 to 14.4 volts
. . . . . . . . . . . . . . . .
Nominal output
Generator speed
6000 rev/min
. . . . . . . . . . . . . .
Control voltage
14 volt
. . . . . . . . . . . . . .
Amp
65 amp
. . . . . . . . . . . . . . . . . . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст