Frelander 2. Manual — part 183
![](/vehicles/onond/oloi/toor/eth.png)
Stage
1:
Stage
2:
2.
CAUTION: Make
sure that the
mating faces are
clean and free of
foreign material.
Apply a
2.5mm
bead of
sealant
STC50550
(Loctite
5900) to
the areas
shown.
2.
3.
CAUTION:
Tighten
the bolts
in the
sequence
shown.
Torque:
5 Nm
30 Nm
3.
![](/vehicles/onond/oloi/toor/bre.png)
Stage
1:
Stage
2:
4.
CAUTION:
Tighten
the bolts
in the
sequence
shown.
Torque:
5 Nm
25 Nm
4.
5.
CAUTION:
Tighten
the bolts
in the
sequence
shown.
Torque:
105°
5.
![](/vehicles/onond/oloi/toor/llwst.png)
Torque:
25 Nm
6.
Torque: 10 Nm
7.
Torque: 10 Nm
8.
![](/vehicles/onond/oloi/toor/repi.png)
Install the pin.
1.
Apply light pressure to the pump body.
2.
Torque: 17 Nm
3.
9.
Apply light pressure to the pump body.
1.
Torque: 10 Nm
2.
Measure the backlash
Refer to:
Specifications
(303-01A Engine - I6 3.2L Petrol,
Specifications).
3.
If necessary, repeat the above procedure.
4.
10.
11.
CAUTION: Make sure that the mating faces are clean and free
of foreign material.
Apply a 2.5mm bead of sealant STC50550 (Loctite 5900) to the
areas shown.
11.
12.
CAUTION: Make sure that new sealing washers are installed.
Fill the engine with the recommended oil to the correct level.
Refer to:
Specifications
(303-01A Engine - I6 3.2L Petrol, Specifications).
12.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст