Frelander 2. Manual — part 367
![](/vehicles/onond/oloi/toor/ovid.png)
19.
WARNING: Make sure that new nuts are
installed.
CAUTION: Make sure that the ball joint ball does
not rotate.
Connect both front stabilizer bar links to the stabilizer
bar.
Torque: 55 Nm
19.
20. NOTE: RH illustration shown, LH is similar.
Install both the fender splash shield extension panels.
20.
Install the front wheels and tires.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
21.
Install the 2 bolts securing the transmission mounting
to the body mounting.
Torque: 175 Nm
22.
Remove the engine support.
23. Install the starter motor.
Refer to:
Starter Motor
(303-06B Starting System - TD4
2.2L Diesel, Removal and Installation).
24.
Install the gear selector assembly.
Refer to:
Gearshift Linkage
(308-06 Manual Transmission/Transaxle
External Controls, Removal and Installation).
25.
![](/vehicles/onond/oloi/toor/wstaya.png)
Connect the clutch slave cylinder hydraulic hose and
secure with the clip.
26.
Connect the 1st and reverse gear position switch
electrical connectors.
27.
28. NOTE: If equipped.
• NOTE: An audible click is heard when the clips are
fully latched.
28.
![](/vehicles/onond/oloi/toor/goveestuslof.png)
29.
WARNING: Make sure that a new steering
column flexible coupling bolt is installed.
Connect the steering column to the steering gear.
Torque: 25 Nm
29.
Refill the transmission with fluid.
Refer to:
Transmission Draining and Filling
(308-03 Manual
Transmission/Transaxle, General Procedures).
30.
Install the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
31.
Bleed the clutch system.
Refer to:
Clutch System Bleeding
(308-00 Manual
Transmission/Transaxle and Clutch - General Information, General
Procedures).
32.
Refill and bleed the power steering.
Refer to:
Power Steering System Bleeding
(211-00 Steering System -
General Information, General Procedures).
33.
![](/vehicles/onond/oloi/toor/gengr.png)
Manual Transmission/Transaxle External Controls -
Torque Specifications
Description
Nm
lb-ft
Gearshift lever bolts
10
7
Gearshift mechanism bracket bolts
24
18
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст