Frelander 2. Manual — part 428
![](/vehicles/onond/oloi/toor/rerakal.png)
Remove the A/C condenser.
6.
Installation
Install the A/C condenser, and tighten the bolt.
Torque: 10 Nm
1.
2.
CAUTION: Extreme cleanliness must be exercised when
handling these components.
• NOTE: Lubricate the O-ring seals with clean refrigerant oil.
Connect the A/C condenser refrigerant lines, tighten the bolts.
Torque: 10 Nm
2.
Install the charge air cooler.
Refer to:
Charge Air Cooler
(303-12B Intake Air Distribution and
Filtering - TD4 2.2L Diesel, Removal and Installation).
3.
Recharge the A/C system.
Refer to:
Air Conditioning (A/C) System Recovery, Evacuation and
Charging
(412-00 Climate Control System - General Information,
General Procedures).
4.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
5.
![](/vehicles/onond/oloi/toor/byod.png)
Climate Control - Ambient Air Temperature Sensor
Removal and Installation
Removal
1.
2.
Installation
To install, reverse the removal procedure.
1.
![](/vehicles/onond/oloi/toor/yeea.png)
Climate Control - Air Conditioning (A/C) CompressorI6 3.2L Petrol
Removal and Installation
Removal
CAUTION: Make sure that the specified amount of refrigerant oil is added.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Recover the air conditioning (A/C) refrigerant.
Refer to:
Air Conditioning (A/C) System Recovery, Evacuation and
Charging
(412-00 Climate Control System - General Information,
General Procedures).
2.
Remove the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
3.
Remove the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
4.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
5.
Remove the A/C compressor, upper support bracket.
6.
Remove the A/C compressor, lower support bracket.
7. Using suitable tools, release the accessory drive belt
tension.
8.
9. CAUTIONS:
Make sure that all openings are sealed. Use new
blanking caps.
Extreme cleanliness must be exercised when
handling these components.
Disconnect the A/C compressor refrigerant lines.
9.
![](/vehicles/onond/oloi/toor/asse.png)
Remove the A/C compressor.
10.
Installation
Install the A/C compressor.
Torque: 25 Nm
1.
2.
CAUTION: Lubricate the new seals with clean refrigerant oil.
Connect the A/C compressor refrigerant lines.
Torque: 24 Nm
2.
Install the accessory drive belt.
3.
Install the A/C compressor, lower support bracket.
Torque: 25 Nm
4.
Install the A/C compressor, upper support bracket.
Torque:
M10 45 Nm
M8 25 Nm
M6 10 Nm
5.
Install the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
6.
Install the battery tray.
7.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст