Frelander 2. Manual — part 233
![](/vehicles/onond/oloi/toor/wonl.png)
Remove the A/C compressor, upper support bracket.
7.
Using suitable tools, release the accessory drive belt
tension.
8.
Release the A/C compressor and position aside.
9.
![](/vehicles/onond/oloi/toor/lfing.png)
Disconnect the cooling fan control electrical connector.
10.
Release the cooling fan wiring harness.
11.
Remove the cooling fan assembly.
12.
Installation
Install the cooling fan assembly.
1.
Install the A/C compressor.
Torque: 25 Nm
2.
Install the A/C compressor, upper support bracket.
Torque:
M10 45 Nm
M8 25 Nm
M6 10 Nm
3.
Install the accessory drive belt.
4.
Install the A/C compressor, lower support bracket.
Torque: 25 Nm
5.
Install the A/C line support bracket.
Torque: 10 Nm
6.
Secure the A/C pipes.
7.
Secure the cooling fan harness.
8.
Connect the cooling fan electrical connector.
9.
Install the intake manifold.
Refer to:
Intake Manifold
(303-01A Engine - I6 3.2L Petrol, Removal
and Installation).
10.
Connect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
11.
![](/vehicles/onond/oloi/toor/nghellay.png)
Engine Cooling - I6 3.2L Petrol - Cooling Fan Module
Removal and Installation
Removal
• NOTE: Petrol illustration shown, diesel similar.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the cooling fan module.
Torque: 6 Nm
2.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст