Frelander 2. Manual — part 224
![](/vehicles/onond/oloi/toor/menta.png)
Charging
(412-00 Climate Control System - General Information,
General Procedures).
Remove the lower engine stabilizer bar.
Refer to:
Engine Lower Support Insulator
(303-01A Engine - I6 3.2L
Petrol, Removal and Installation).
10.
Remove the front subframe assembly.
Refer to:
Front Subframe
(502-00 Uni-Body, Subframe and Mounting
System, Removal and Installation).
11.
Siphon the fluid from the power steering reservoir.
12.
Disconnect the engine control module (ECM).
13.
14.
![](/vehicles/onond/oloi/toor/derent.png)
15.
Release the LH and RH halfshafts.
Special Tool(s):
205-857
16.
Remove the LH halfshaft.
17.
![](/vehicles/onond/oloi/toor/ajscalas.png)
Remove the RH halfshaft.
18.
Tie the suspension arms aside for access.
19.
Disconnect the cooling fan control electrical connector.
20.
Remove the intake air duct.
21.
![](/vehicles/onond/oloi/toor/ghorote.png)
22.
CAUTION: Be prepared to collect escaping
fluids.
Disconnect the low pressure line from the power
steering pump.
22.
Release the power steering high-pressure pipe.
23.
24. CAUTIONS:
Discard the seal.
Make sure that all openings are sealed.
24.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст