Frelander 2. Manual — part 556
![](/vehicles/onond/oloi/toor/ysas.png)
Torque: 10 Nm
5.
Torque: 4 Nm
6.
Torque: 25 Nm
7.
Installation
To install, reverse the removal procedure.
1.
![](/vehicles/onond/oloi/toor/gay.png)
Seating - Front Seat Manual Height Adjustment Lever
Removal and Installation
Removal
1. Remove the drivers side seat slides.
For additional information, refer to:
Front Seat Track
(501-10 Seating,
Removal and Installation).
2. Remove the front seat cushion base.
For additional information, refer to:
Front Seat Cushion
(501-10
Seating, Removal and Installation).
3.
4.
5. TORQUE: 25 Nm
![](/vehicles/onond/oloi/toor/vel.png)
6. CAUTIONS:
Tie straps
must be fitted,
failure to follow
this instruction
may result in
personal injury.
Failure to
follow this
instruction may
cause damage
to the vehicle.
Secure the
seat base
using the 4
tie straps
supplied, as
shown.
Using
the seat
height
adjuster,
lower
the seat
base to
its
lowest
position.
7. Release the arm from the height adjuster.
Remove the Torx bolt.
8. Drill out the 4 rivets.
Installation
1. To install, reverse the removal procedure.
![](/vehicles/onond/oloi/toor/loung.png)
Seating - Front Seat Cushion Cover
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the front seat cushion assembly.
Refer to:
Front Seat Cushion
(501-10 Seating, Removal and
Installation).
1.
2.
3.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст