Frelander 2. Manual — part 21
![](/vehicles/onond/oloi/toor/kittho.png)
General Information - Diagnostic Trouble Code (DTC) IndexDTC:
Driver/Passenger Door Module (DDM/PDM)
Description and Operation
• NOTE: If a control module or component is suspect and the vehicle remains under manufacturer warranty, refer to the
Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval program is in operation, before
the replacement of a component.
• NOTE: Generic scan tools may not read the codes listed, or may read only 5-digit codes. Match the 5 digits from the scan
tool to the first 5 digits of the 7-digit code listed to identify the fault (the last 2 digits give extra information read by the
manufacturer-approved diagnostic system).
• NOTE: When performing voltage or resistance tests, always use a digital multimeter (DMM) accurate to three decimal
places, and with an up-to-date calibration certificate. W hen testing resistance always take the resistance of the DMM
leads into account.
• NOTE: Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
• NOTE: Inspect connectors for signs of water ingress, and pins for damage and/or corrosion.
• NOTE: If DTCs are recorded and, after performing the pinpoint tests, a fault is not present, an intermittent concern may
be the cause. Always check for loose connections and corroded terminals.
Description And Operation
For a detailed description of the driver passenger door system, refer to the relevant Description and Operation section in
the workshop manual.
For additional information, refer to:
Handles, Locks, Latches and Entry Systems
(501-14 Handles, Locks, Latches and Entry
Systems, Description and Operation).
Driver/passenger door module
B108F-23 Cabin
Lock/Unlock
Switch
Signal stuck low Carry out the pinpoint test associated with this DTC using the
manufacturer approved diagnostic system
B10ED-11 Rear door driver
side double
locking motor
Circuit short to
ground
Refer to the electrical circuit diagrams and check rear door driver side
double locking motor control circuit for short to ground
B10ED-15 Rear door driver
side double
locking motor
Circuit short to
power or open
Refer to the electrical circuit diagrams and check rear door driver side
double locking motor control circuit for short to power, open circuit
B10EE-11 Rear door
passenger side
double locking
motor
Circuit short to
ground
Refer to the electrical circuit diagrams and check rear door passenger
side double locking motor control circuit for short to ground
B10EE-15 Rear door
passenger side
double locking
motor
Circuit short to
power or open
Refer to the electrical circuit diagrams and check rear door passenger
side double locking motor control circuit for short to power, open circuit
B110A-11 Rear door driver
side central
locking motor
Circuit short to
ground
Refer to electrical circuit diagrams and check rear door driver side
central locking motor control circuit for short to ground
B110A-15 Rear door driver
side central
locking motor
Circuit short to
power or open
Refer to electrical circuit diagrams and check rear door driver side
central locking motor control circuit for short to power, open circuit
B110B-11 Rear door
passenger side
central locking
motor
Circuit short to
ground
Refer to electrical circuit diagrams and check rear door passenger side
central locking motor control circuit for short to ground
B110B-15 Rear door
passenger side
central locking
motor
Circuit short to
power or open
Refer to electrical circuit diagrams and check rear door passenger side
central locking motor control circuit for short to power, open circuit
B117C-07 Rear Power
Window up
Mechanical
Failure
Check for mechanical failure of rear window mechanism
B117C-72 Rear Power
Window up
Actuator Stuck
Open
Clear DTC and re-test. If DTC returns, install a new rear door module,
refer to the new module installation note at the top of the DTC Index
B117C-73 Rear Power
Window up
Actuator Stuck
Closed
Clear DTC and re-test. If DTC returns, install a new rear door module,
refer to the new module installation note at the top of the DTC Index
B117C-92 Rear Power
Window up
Performance or
incorrect
operation
Refer to electrical circuit diagrams and check power and ground
supplies to rear door module
B117D-72 Rear Power
Window down
Actuator Stuck
Open
Clear DTC and re-test. If DTC returns, install a new rear door module,
refer to the new module installation note at the top of the DTC Index
B117D-73 Rear Power
Window down
Actuator Stuck
Closed
Clear DTC and re-test. If DTC returns, install a new rear door module,
refer to the new module installation note at the top of the DTC Index
![](/vehicles/onond/oloi/toor/ous.png)
B117E-07 Front Power
Window up
Mechanical
failure
Check for mechanical failure of front window mechanism
B117E-72 Front Power
Window up
Actuator stuck
open
Clear DTC and re-test. If DTC returns, install a new DDM/PDM, refer to
the new module installation note at the top of the DTC Index
B117E-73 Front Power
Window up
Actuator stuck
closed
Clear DTC and re-test. If DTC returns, install a new DDM/PDM, refer to
the new module installation note at the top of the DTC Index
B117F-72 Front Power
Window down
Actuator stuck
open
Clear DTC and re-test. If DTC returns, install a new DDM/PDM, refer to
the new module installation note at the top of the DTC Index
B117F-73 Front Power
Window down
Actuator stuck
closed
Clear DTC and re-test. If DTC returns, install a new DDM/PDM, refer to
the new module installation note at the top of the DTC Index
B11D1-83 LIN Bus Circuit
"C"
Value of signal
protection
calculation
incorrect
Refer to the electrical circuit diagrams and test LIN circuit between
driver switch pack and DDM for short/open circuits, clear DTC and
re-test. If DTC remains install a new switch pack, refer to new
module/component installation note at the top of the DTC Index
B11D1-86 LIN Bus Circuit
"C"
Signal Invalid
Refer to the electrical circuit diagrams and test LIN circuit between
driver switch pack and DDM for short/open circuits, clear DTC and
re-test. If DTC remains install a new switch pack, refer to new
module/component installation note at the top of the DTC Index
B11D1-87 LIN Bus Circuit
"C"
Missing Message Refer to the electrical circuit diagrams and test LIN circuit between
driver switch pack and DDM for short/open circuits, clear DTC and
re-test. If DTC remains install a new switch pack, refer to new
module/component installation note at the top of the DTC Index
B11F6-11 Driver Folding
Mirror Motor
Short To Ground Refer to electrical circuit diagrams and check driver folding mirror
motor for short to ground
B11F6-15 Driver Folding
Mirror Motor
Short to power
or open
Refer to electrical circuit diagrams and check driver folding mirror
motor for short to power, open circuit
B11F7-11 Passenger
Folding Mirror
Motor
Short To Ground Refer to electrical circuit diagrams and check passenger folding mirror
motor for short to ground
B11F7-15 Passenger
Folding Mirror
Motor
Short to power
or open
Refer to electrical circuit diagrams and check passenger folding mirror
motor for short to power, open circuit
B1A98-83 LIN Bus Circuit
#1
Value of signal
protection
calculation
incorrect
Carry out the pinpoint test associated with this DTC using the
manufacturer approved diagnostic system. Refer to the electrical circuit
diagrams and test LIN circuit between driver side rear door module and
DDM for short/open circuits, clear DTC and re-test. If DTC remains
install a new switch pack, refer to new module/component installation
note at the top of the DTC Index
B1A98-86 LIN Bus Circuit
#1
Signal Invalid
Refer to the electrical circuit diagrams and test LIN circuit between
driver side rear door module and DDM for short/open circuits, clear DTC
and re-test. If DTC remains install a new switch pack, refer to new
module/component installation note at the top of the DTC Index
B1A98-87 LIN Bus Circuit
#1
Missing Message Refer to the electrical circuit diagrams and test LIN circuit between
driver side rear door module and DDM for short/open circuits, clear DTC
and re-test. If DTC remains install a new switch pack, refer to new
module/component installation note at the top of the DTC Index
B1C39-29 Key Lock Switch
Signal invalid
Carry out the associated pinpoint tests associated with this DTC using
the manufacturer approved diagnostic system
C1B15-11 Sensor Supply
#2
Short to ground
Refer to the electrical circuit diagrams and test rear window sensor
supply circuit for short to ground
C1B15-15 Sensor Supply
#2
Short to power
or open circuit
Refer to the electrical circuit diagrams and test rear window sensor
supply circuit for short to power or open circuit
U2004-24 Auxiliary Switch
Pack
Signal stuck high Carry out the pinpoint tests associated with this DTC using the
manufacturer approved diagnostic system
Driver/Passenger door module (DDM/PDM)
DTC
Description
Possible Cause
Action
B109C-15 Front Courtesy Light
Short to power or open circuit
Refer to the electrical circuit diagrams and test
front courtesy light circuit for short to power or
open circuit
B109D-11 Front Courtesy Light
Short to ground
Refer to the electrical circuit diagrams and test
front courtesy light circuit for short ground
B10EB-11 Driver door double
locking motor
Short to ground
Refer to the electrical circuit diagrams and test
driver door double locking motor circuit for short
ground
B10EB-15 Driver door double
locking motor
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver door double locking motor circuit for short to
power or open circuit
B10EC-11 Passenger door
double locking motor
Short to ground
Refer to the electrical circuit diagrams and test
passenger door double locking motor circuit for
short ground
B10EC-15 Passenger door
double locking motor
Short to power or open circuit
Refer to the electrical circuit diagrams and test
passenger door double locking motor circuit for
short to power or open circuit
![](/vehicles/onond/oloi/toor/hindy.png)
DTC
Description
Possible Cause
Action
B1108-11 Driver door central
locking motor
Short to ground
Refer to the electrical circuit diagrams and test
driver door central locking motor circuit for short
ground
B1108-15 Driver door central
locking motor
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver door central locking motor circuit for short to
power or open circuit
B1109-11 Passenger door
central locking motor
Short to ground
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1109-15 Passenger door
central locking motor
Short to power or open circuit
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1163-11 Left Mirror Heater
Output short to
ground
Short to ground
Refer to the electrical circuit diagrams and test left
mirror heater output circuit for short to ground
B1163-15 Left Mirror Heater
Output short to
power
Short to power or open circuit
Refer to the electrical circuit diagrams and test left
mirror heater output circuit for short to power or
open circuit
B1164-11 Right Mirror Heater
Output short to
ground
Short to ground
Refer to the electrical circuit diagrams and test
right mirror heater output circuit for short to ground
B1164-15 Right Mirror Heater
Output short to
power
Short to power or open circuit
Refer to the electrical circuit diagrams and test
right mirror heater output circuit for short to power
or open circuit
B1165-11 Left Front Puddle
Lamp Output short
to ground
Short to ground
Refer to the electrical circuit diagrams and test left
front puddle lamp output circuit for short to ground
B1165-15 Left Front Puddle
Lamp Output open
load or short to
power
Short to power or open circuit
Refer to the electrical circuit diagrams and test left
front puddle lamp output circuit for short to power
or open circuit
B1166-11 Right Front Puddle
Lamp Output short
to ground
Short to ground
Refer to the electrical circuit diagrams and test
right front puddle lamp output circuit for short to
ground
B1166-15 Right Front Puddle
Lamp Output open
load or short to
battery
Short to power or open circuit
Refer to the electrical circuit diagrams and test
right front puddle lamp output circuit for short to
power or open circuit
B117E-72 Front Power Window
up
Actuator stuck open
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
B117E-73 Front Power Window
up
Actuator stuck closed
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
B117F-72 Front Power Window
down
Actuator stuck open
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
B117F-73 Front Power Window
down
Actuator stuck closed
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
B1189-29 Front Window
Position Sensor
Signal invalid
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B118A-29 Rear Window
Position Sensor
Signal invalid
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1A94-11 Driver Mirror
Short to ground
Refer to the electrical circuit diagrams and test
driver mirror fold motor circuit for short to ground
B1A94-15 Driver Mirror
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver mirror fold motor circuit for short to power or
open circuit
B1A95-11 Passenger Mirror
Short to ground
Refer to the electrical circuit diagrams and test
passenger mirror fold motor circuit for short to
ground
B1A95-15 Passenger Mirror
Short to power or open circuit
Refer to the electrical circuit diagrams and test
passenger mirror fold motor circuit for short to
power or open circuit
B1A98-83 LIN Bus Circuit #1
Value of signal protection
calculation incorrect
Refer to the electrical circuit diagrams and test LIN
circuit between driver switch pack and DDM for
short/open circuits, clear DTC and re-test. If DTC
remains install a new switch pack, refer to new
module/component installation note at the top of
the DTC Index
B1A98-86 LIN Bus Circuit #1
Signal Invalid
Refer to the electrical circuit diagrams and test LIN
circuit between driver switch pack and DDM for
short/open circuits, clear DTC and re-test. If DTC
remains install a new switch pack, refer to new
module/component installation note at the top of
the DTC Index
B1A98-87 LIN Bus Circuit #1
Missing Message
Refer to the electrical circuit diagrams and test LIN
circuit between driver switch pack and DDM for
short/open circuits, clear DTC and re-test. If DTC
remains install a new switch pack, refer to new
module/component installation note at the top of
the DTC Index
B1C09-11 Driver Left/Right
Mirror Motor Circuit
Short to ground
Refer to the electrical circuit diagrams and test
driver left/right mirror motor circuit for short to
ground
![](/vehicles/onond/oloi/toor/dayona.png)
DTC
Description
Possible Cause
Action
B1C09-15 Driver Left/Right
Mirror Motor Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver left/right mirror motor circuit for short to
power or open circuit
B1C10-11 Driver Up/Down
Mirror Motor Circuit
Short to ground
Refer to the electrical circuit diagrams and test
driver up/down mirror motor circuit for short to
ground
B1C10-15 Driver Up/Down
Mirror Motor Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver up/down mirror motor circuit for short to
power or open circuit
B1C11-11 Passenger Left/Right
Mirror Motor Circuit
Short to ground
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1C11-15 Passenger Left/Right
Mirror Motor Circuit
Short to power or open circuit
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1C12-11 Passenger Up/Down
Mirror Motor Circuit
Short to ground
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1C12-15 Passenger Up/Down
Mirror Motor Circuit
Short to power or open circuit
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
B1C13-11 Driver Up/Down
Mirror Motor
Feedback Circuit
Short to ground
Refer to the electrical circuit diagrams and test
driver up/down mirror motor feedback circuit for
short to ground
B1C13-15 Driver Up/Down
Mirror Motor
Feedback Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver up/down mirror motor feedback circuit for
short to power or open circuit
B1C14-11 Driver Left/Right
Mirror Motor
Feedback Circuit
Short to ground
Refer to the electrical circuit diagrams and test
driver left/right mirror motor feedback circuit for
short to ground
B1C14-15 Driver Left/Right
Mirror Motor
Feedback Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
driver left/right mirror motor feedback circuit for
short to power or open circuit
B1C15-11 Passenger Up/Down
Mirror Motor
Feedback Circuit
Short to ground
Refer to the electrical circuit diagrams and test
passenger up/down mirror motor feedback circuit for
short to ground
B1C15-15 Passenger Up/Down
Mirror Motor
Feedback Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
passenger up/down mirror motor feedback circuit for
short to power or open circuit
B1C16-11 Passenger Left/Right
Mirror Motor
Feedback Circuit
Short to ground
Refer to the electrical circuit diagrams and test
passenger left/right mirror motor feedback circuit for
short to ground
B1C16-15 Passenger Left/Right
Mirror Motor
Feedback Circuit
Short to power or open circuit
Refer to the electrical circuit diagrams and test
passenger left/right mirror motor feedback circuit for
short to power or open circuit
C1B14-11 Sensor Supply #1
Short to ground
Refer to the electrical circuit diagrams and test
window sensor supply circuit for short to ground
C1B14-15 Sensor Supply #1
Short to power or open circuit
Refer to the electrical circuit diagrams and test
window sensor supply circuit for short to power or
open circuit
U0010-00 Medium speed CAN
communication Bus
Medium speed CAN
communication Bus
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
U0140-00 Lost communication
with CJB
Logged when subscribed CAN
message missing from CJB
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
U0208-00 Lost communication
With Driver Seat
Module (DSM)
Missing message
Carry out pinpoint tests associated with this DTC
using the manufacturer approved diagnostic system
U0300-00 Internal control
module software
incompatibility
Invalid configuration message
is received
Re-configure the CJB using the manufacturer
approved diagnostic system. Clear the DTC and
retest. If the DTC is still logged suspect the
DDM/PDM, refer to the new module installation note
at the top of the DTC Index
U2002-24 Switch
Signal stuck high
Clear DTC and re-test. If DTC remains, install a new
passenger side window switch
U2010-11 Switch illumination
Circuit short to ground
Carry out CAN network tests using the manufacturer
approved diagnostic system
U2010-12 Switch illumination
Circuit short to battery
Carry out CAN network tests using the manufacturer
approved diagnostic system
U2012-08 Car Configuration
Parameter(s)
Bus signal/message failures
Cycle the ignition status and re-test. If DTC
remains, re-configure the RJB using the
manufacturer approved diagnostic system
U2013-24 Switch Pack
Signal stuck high
Clear DTC and re-test. If DTC remains, install a new
driver side window switch pack, refer to new
module/component installation note at the top of
the DTC Index
U2014-44 Control module
hardware
Data Memory Failure
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
U2100-00 Initial configuration
not complete
No sub type information
Re-configure the DDM/PDM using the manufacturer
approved diagnostic system
U3000-49 Control module
Internal electronic failure
Install a new DDM/PDM, refer to the new module
installation note at the top of the DTC Index
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст