Frelander 2. Manual — part 108
![](/vehicles/onond/oloi/toor/eld.png)
4.
CAUTION: Make sure that the brake hose is not twisted and
is correctly located.
Install the brake caliper and tighten the new bolts.
Torque: 200 Nm
4.
Install the front wheel.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
5.
Depress the brake pedal several times, check the fluid level in the
brake fluid reservoir and top-up with brake fluid if necessary.
6.
![](/vehicles/onond/oloi/toor/lyo.png)
Front Disc Brake - Brake Caliper Anchor Plate
Removal and Installation
Removal
1.
WARNING: Do not work on or under a vehicle supported only
by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
1.
Remove the front wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
3.
Torque: 28 Nm
4.
5.
CAUTION: Do not allow the brake caliper to hang on the
brake hose.
Release the brake caliper.
5.
![](/vehicles/onond/oloi/toor/ladowaknds.png)
6.
7.
CAUTION: Make sure that new bolts are
installed.
Torque: 200 Nm
7.
Installation
1.
CAUTION: Make sure that the brake hose is not twisted and
is correctly located.
To install, reverse the removal procedure.
1.
![](/vehicles/onond/oloi/toor/wheldab.png)
Rear Disc Brake -
General Specification
Item
Specification
Rear disc:
3.2 Petrol engine
Ventilated
2.2 Diesel engine
Solid
Rear disc diameter:
Ventilated
302 mm (11.9 in)
Solid
302 mm (11.9 in)
Rear disc thickness new:
Ventilated
20 mm (0.79 in)
Solid
12 mm (0.47 in)
Service limit:
Ventilated
18 mm
Solid
10 mm
Pad minimum thickness
2 mm
Maximum disc run out - Disc installed
0.080 mm
Torque Specifications
Description
Nm
lb-ft
Brake caliper bleed screw
10
7
Brake caliper fixed carrier to wheel knuckle bolts*
110
81
Brake caliper guide pin bolts
30
22
Brake disc dust shield bolts
13
10
Brake disc Torx screw
35
26
Brake flexi hose unions to caliper
15
11
Brake hose retaining bracket to wheel knuckle bolt
22
16
* New nuts/bolts must be installed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст