Discovery 2. Manual — part 464

EMISSION CONTROL - V8

REPAIRS 17-2-55

Filter - fuel leak detection pump - up to
03MY

$% 17.45.42

Remove

1. Remove bolt securing air filter to mounting

bracket and collect nut.

2. Remove clip securing hose to air filter.
3. Release hose from air filter.
4. Remove air filter.

Refit

1. Connect hose to air filter and secure with clip.
2. Position air filter to mounting bracket and

secure with nut and bolt.

Filter - fuel leak detection pump - from
03MY

$% 17.45.42

Remove

1. Remove Allen bolt securing fuel leak detection

pump filter to the mounting bracket.

2. Remove and discard clip securing fuel pipe to

the fuel leak detection pump filter and
disconnect the pipe.

CAUTION: Always fit plugs to open
connections to prevent contamination.

3. Remove the fuel leak detection pump filter.

Refit

1. Connect fuel pipe to the fuel leak detection

pump and secure with a new clip.

2. Position fuel leak detection pump filter to

mounting bracket, fit Allen bolt and tighten to 3
Nm (2.2 lbf.ft).

17M 0224

EMISSION CONTROL - V8

17-2-56 REPAIRS

ENGINE MANAGEMENT SYSTEM - TD5

DESCRIPTION AND OPERATION

18-1-1

Deze pagina werd opzettelijk niet gebruikt

Cette page est intentionnellement vierge

Questa pagina è stata lasciata in bianco di proposito

Diese Seite ist leer

Esta página foi deixada intencionalmente em branco

Esta página fue dejada en blanco intencionalmente

This page is intentionally left blank

ENGINE MANAGEMENT SYSTEM - Td5

DESCRIPTION AND OPERATION

ENGINE MANAGEMENT SYSTEM - TD5

18-1-2

DESCRIPTION AND OPERATION

Engine management component
location - passenger compartment

LHD illustrated

1 Diagnostic connector
2 Throttle position sensor
3 Brake pedal switch