Discovery 2. Manual — part 235
INTERIOR TRIM COMPONENTS
REPAIRS
76-3-3
Trim casing - upper - 'B' post
$% 76.13.28
Remove
1. Release front door aperture seal from 'B' post.
2. Release rear door aperture seal from 'B' post.
3. Remove cap from front seat belt lower
anchorage bolt.
4. Remove front seat belt lower anchorage bolt.
5. Feed seat belt through trim casing.
6. Remove trim casing.
7. Remove sound insulation from trim casing.
Refit
1. Fit sound insulation to trim casing.
2. Feed front seat belt through trim casing.
3. Fit front seat belt lower anchorage and tighten
bolt to 32 Nm (24 lbf.ft).
4. Fit cap to front seat belt lower anchorage bolt.
5. Fit trim casing to 'B' post.
6. Fit front door aperture seal to 'B' post.
7. Fit rear door aperture seal to 'B' post.
Trim casing - lower - 'B' post
$% 76.13.29
Remove
1. Release front door aperture seal from 'B' post.
2. Release rear door aperture seal from 'B' post.
3. Move 'B' post upper trim casing aside.
4. Release 3 clips securing lower trim casing to
'B' post.
5. Remove lower trim casing.
Refit
1. Fit lower trim casing to 'B' post and secure with
clips.
2. Position 'B' post upper trim casing to 'B' post.
3. Fit front door aperture seal to 'B' post.
4. Fit rear door aperture seal to 'B' post.
INTERIOR TRIM COMPONENTS
76-3-4
REPAIRS
Trim casing - 'D' post
$% 76.13.73
Remove
1. Fold rear seat forward.
2. Remove tail door aperture upper trim casing.
3. Release caps from end of grab handle.
4. Remove 2 bolts securing grab handle to body.
5. Remove grab handle and collect two spacers.
6. Remove 8 trim clips securing trim casing to
body.
7. Models with third row seats:
a Remove third row seat belt escutcheon.
b Remove cap from lower anchorage of third
row seat belt.
c Remove lower anchorage bolt.
8. Models with volumetric alarm:
a Release volumetric sensor from trim casing.
b Disconnect multiplug from volumetric
sensor.
c Remove volumetric sensor.
9. Remove rear seat belt blanking plate.
10. Release 2 clips securing trim casing to body.
11. Remove trim casing.
Refit
1. Fit trim casing and secure with clips.
2. Fit rear seat belt blanking plate.
3. Models with volumetric alarm:
a Position volumetric sensor to trim casing
and connect multiplug.
b Fit volumetric sensor to trim casing.
4. Models with third row seats:
a Fit lower anchorage of third row seat belt
and tighten bolt to 32 Nm (24 lbf.ft).
b Fit cap to lower anchorage bolt.
c Fit third row seat belt escutcheon to trim
casing.
5. Fit trim clips securing trim casing to body.
6. Position grab handle and spacers to trim
casing.
7. Fit and tighten bolts securing grab handle to
body to 3 Nm (2.2 lbf.ft).
8. Close caps on ends of grab handle.
9. Fit tail door aperture upper trim casing.
10. Reposition rear seat.
INTERIOR TRIM COMPONENTS
REPAIRS
76-3-5
Console - centre - automatic models
$% 76.25.01
Remove
1. Select position 'D', remove gear selector knob
and collect spacer.
2. Models from 03MY:Remove both centre
console cup holders.
3. Release selector panel, disconnect multiplug
and remove panel .
4. Release clips securing transfer box lever gaiter
to centre console and remove knob and gaiter.
5. Models with base trim: Remove rubber mat
from centre console and remove cover plate
from switch pack.
6. Models with base trim: Remove 4 screws
securing switch pack to centre console,
disconnect multiplugs and remove switch pack.
INTERIOR TRIM COMPONENTS
76-3-6
REPAIRS
7. Models with veneer trim: Release veneered
console cover and remove cigar lighter
element. Disconnect multiplugs from switch
pack and remove veneered console cover.
8. Remove 2 bolts securing forward edge of
console to transmission tunnel.
9. Release handbrake gaiter from console.
10. Remove clip and clevis pin securing cable to
handbrake lever.
11. Move handbrake to fully upward position.
12. Release electric seat switches from console.
13. Disconnect multiplugs from switches and
remove.
14. Remove 2 bolts securing rear of console to
transmission tunnel.
15. Release centre console from fascia.
16. Disconnect multiplug and bulb from cigar
lighter.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст