Range Rover Body Repair Manual — part 20
![](/vehicles/onond/athetadanoue/qut/ita.png)
CHASSIS AND BODY
5
REPAIR
CENTRE CONSOLE
Service repair no - 76.25.01
Remove
1. Remove electric window switch pack.
See
ELECTRICAL, Repair.
2. Disconnect rear footwell lamp multiplug.
3. Remove base in console bin.
4. Remove nuts securing rear of console to floor
studs.
5. Move both front seats fully rearward.
6. Remove 2 screws securing each side panel to
centre console. Release sprag clips from fascia
switch pack by firmly pulling rearwards. Remove
side panels.
7. Remove screw at rear of gear lever applique.
Raise rear end of applique to disengage 2 spring
clips at forward end.
8. Disconnect cigar lighter multiplug, release cigar
lighter bulb. Remove gear lever applique.
9. Manual gearbox models:
Remove gear knob. Remove 2 bolts securing
front of console to floor.
10. Automatic gearbox models:
Remove 2 screws securing selector lever.
11. Remove selector lever.
![](/vehicles/onond/athetadanoue/qut/uninothese.png)
76
CHASSIS AND BODY
NEW RANGE ROVER
6
REPAIR
12. Remove 3 screws securing selector graphics
plate.
13. Raise selector graphics plate, disconnect
multiplug.
14. Remove selector graphics plate.
15. All models:
Remove clip securing park brake lever clevis pin,
remove clevis pin. Raise park brake lever to
vertical position.
16. Raise rear of console to disengage rear vent
ducts. Remove centre console.
Refit
17. Fit centre console, ensuring that ducts to rear
fresh air vents are correctly engaged.
18. Fit nuts securing centre console to floor.
19. Automatic - position graphics plate over selector
lever, connect multiplug.
20. Align graphics plate to console, secure with
screws.
21. Fit selector lever, secure with screws.
22. Manual - secure front of centre console to floor
with bolts.
23. Fit gear knob.
24. Lower park brake lever, fit clevis pin and secure
pin with clip.
25. Position gear/selector lever applique, connect
cigar lighter multiplug and insert illumination bulb
in holder.
26. Engage applique clips to console. Secure
applique with screw.
27. Position console side panels. Firmly push
forward to engage sprag clips into fascia switch
pack. Fit and tighten screws.
28. Return front seats to original positions.
29. Fit base to console bin, tighten with screws.
30. Connect rear footwell lamp multiplug.
31. Fit electric window switch pack.
See
ELECTRICAL, Repair.
![](/vehicles/onond/athetadanoue/qut/yuroneme.png)
CHASSIS AND BODY
7
REPAIR
CHASSIS CROSS MEMBER
Remove
1. Disconnect battery negative lead.
2. Raise vehicle on four post lift.
3. Support transmission with a suitable stand.
4. Remove and discard 6 nuts securing
transmission mount to crossmember. Remove
snubber bar.
5. Remove 3 of 4 nuts and bolts securing each side
of crossmember to chassis.
6. With assistance, remove remaining bolt securing
crossmember. Remove crossmember.
Refit
7. With assistance, position crossmember to
chassis. Secure with nuts and bolts. Tighten to
45 Nm. (33 lbf.ft)
8. Fit snubber bar. Secure transmission mount to
crossmember with new flange nuts. Tighten to
45 Nm. (33 lbf.ft)
9. Remove support from transmission.
10. Lower vehicle.
11. Reconnect battery negative lead.
![](/vehicles/onond/athetadanoue/qut/doul.png)
76
CHASSIS AND BODY
NEW RANGE ROVER
8
REPAIR
ENGINE ACOUSTIC COVER
Service repair no - 76.11.06
Remove
1. Raise front of vehicle.
WARNING: Support on safety stands.
2. Release 4 threaded fasteners securing engine
acoustic cover to chassis brackets.
3. Release acoustic cover from brackets and
manoeuvre past steering gear.
Refit
4. Fit acoustic cover to brackets and secure with
threaded fasteners.
GEARBOX LOWER ACOUSTIC COVER
Service repair no - 76.11.13
Remove
1. Raise front of vehicle.
WARNING: Support on safety stands.
2. Release 6 threaded fasteners securing lower
acoustic cover to side acoustic covers.
3. Remove lower acoustic cover.
Refit
4. Fit acoustic cover to side acoustic covers.
5. Tighten threaded fasteners securing lower cover
to side covers.
6. Remove stand(s) and lower vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст