Jaguar XJ (X350). Manual — part 467
Tighten to 22 Nm.
All vehicles
35 . Remove the special tool.
36 . Install the crankshaft position sensor.
Tighten to 10 Nm.
37 . Connect the crankshaft position sensor electrical connector.
38 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
39 . Install the spark plugs.
40
.
Install the engine front cover.
For additional information, refer to Engine Front Cover - VIN Range: G00442->G45703
(12.65.01)
www.
Timing Drive Components - VIN Range:
G45704->G99999 (12.65.13)
Special Service Tools
Camshaft setting tool
303-530
Timing chain tensioning tool
303-532
Crankshaft setting tool
303-645
Removal
1
.
Remove the engine front cover.
For additional information, refer to Engine Front Cover - VIN Range: G45704->G99999
(12.65.01)
2 . Remove the spark plugs.
3 . Raise the vehicle.
4 . Disconnect the crankshaft position (CKP) sensor electrical connector.
5 . Remove the CKP sensor.
6
.
CAUTION: Make sure the spark plugs are removed to enable the engine to rotate
freely.
CAUTION: Do not rotate the crankshaft counterclockwise. The timing chains may
bind causing engine damage.
CAUTION: Rotate the crankshaft clockwise to position the engine to top dead center
(TDC) No. 1 cylinder
Install the special tool 303-645.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст