Jaguar XJ (X350). Manual — part 316
![](/vehicles/nyostiena/ksachif/dof/liventhig.png)
Installation
Engine (12.41.01)
Special Service Tools
Engine Lifting Bracket
303-661
Engine Support Bracket
303-021
5 point security torx bit
418-535
Installation
1
.
NOTE:
Make sure all wiring harnesses and oil pipes are suitably positioned for engine
installation.
Install the engine assembly.
Make sure engine mounts are correctly located
![](/vehicles/nyostiena/ksachif/dof/veni.png)
Remove the floor Crane.
2 . Install the special tool.
3 . Raise the vehicle.
4 . Attach the automatic transmission oil cooler tubes bracket.
Tighten to 10 Nm.
www.
![](/vehicles/nyostiena/ksachif/dof/dour.png)
Left-hand shown, right hand similar.
Install the engine mounts lower retaining bolts.
Tighten to 63 Nm.
6 . Attach the power steering hose.
Tighten to 10 Nm.
7 . Install the air conditioning compressor. <<412-03>>
8 . Install the generator battery positive cable retaining nut.
Tighten to 12 Nm.
5 . NOTE:
![](/vehicles/nyostiena/ksachif/dof/calla.png)
9 . Attach the generator battery positive cable protective cover.
10
.
Attach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt
tensioner.
2) Attach the accessory drive belt.
11 . Lower the vehicle.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст